Sami WS-2372 Wearable User Manual
Model: WS-2372 | Junior Tech Series
Introduction
Thank you for purchasing the Sami wearable WS-2372. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and uses the best components possible for its products.
1. Quick Start Guide
Overview
Image of the Sami WS-2372 smartwatch, a black wearable device with a square screen displaying time, date, heart rate, and distance.
Diagram showing the front and back of the Sami WS-2372 smartwatch. Part 1 indicates the Touch screen, Part 2 the Heart sensor, and Part 3 the Charging PIN.
- 1. Touch screen
- 2. Heart sensor
- 3. Charging PIN
Charging Instructions:
- Make sure the pins on the charging cable fit correctly onto the charging terminals on the back of your smart watch.
- Plug the big end of the USB cable into a power source. After successful charging, a charging icon will appear on the screen.
Installing the "Fit4Kid" App and Connecting
Install "Fit4Kid" App
Search and install the "Fit4Kid" app from Google Play or App Store. Alternatively, scan the QR code provided in the original document to install the app directly.
Connect the Smart Watch with the Phone
- Enable Bluetooth on your smart phone.
- Open the "Fit4Kid" app on your smart phone and fill in all the requested information in the "Settings" menu.
- Tap "Connect device" in the "Settings" menu.
- Select the smart watch icon to connect.
- Choose your device name to connect it with your phone.
Important Notes:
- Please note that you must connect through the app and not via the Bluetooth menu of your phone.
- During installation, you will see pop-up windows for permissions; please accept all of them for correct functioning, especially those related to location and background execution.
Unbind Smart Watch with Mobile Phone
- Open the "Fit4Kid" app on your smart phone.
- Tap "Disconnect device" in the "Settings" menu and confirm "OK".
- To fully disconnect your smart watch from your phone, click "Disconnect device" in the "Settings" menu of the "Fit4Kid" app, then go to your phone's Bluetooth settings and select "Forget This Device".
Operation Introduction
- To switch on the watch: Press and hold the center of the touch screen until the display turns on.
- To switch off the watch: From the main interface, slide the screen from right to left to enter the sub-menu, then slide up and down to enter settings. You will find the power off icon there.
- To light the screen: You can press the touch screen, or enable gesture control in the advanced settings of the Fit4Kid app and then raise your hand.
2. How to Use
- Turn on: Press and hold the center of the touch screen for 3 seconds.
- Go to main menu: Slide from right to left on the main interface; slide up and down to check more functions.
- Select a function: Slide up and down, then tap the icon.
- Confirm: Tap the icon.
- Exit menu: Slide from left to right on the screen.
- Check notifications: Slide from left to right on the main interface.
3. Main Menu
After turning on the smart watch, the main interface will be displayed.
From the main interface:
- Go to the main menu:
- Slide from right to left to enter the main menu.
- Slide up and down to check more functions.
- Tap an icon to enter the sub-menu. Slide from left to right to return to the previous menu.
- Go to the notification shortcut interface:
Slide from left to right from the main interface.
Image showing a chat icon with '8' and an arrow pointing to a screen displaying notifications from Facebook, WhatsApp, and Messenger.
- Go to other shortcuts screen:
Slide up and down from the main interface.
4. Functions
Quick Access Shortcuts
Image showing icons for Brightness, Find Phone, Shut Down, and About.
- No. 1 Brightness: You can adjust screen brightness by clicking this icon. ⚙️
- No. 2 Find phone: When your smart watch is connected with Fit4Kid, your phone will ring by clicking this icon. ?
- No. 3 Shut down: You can shut down your smart watch by clicking this icon. ?
- No. 4 About: You will find the device name, address, and firmware version by clicking this icon. ℹ️
Watch Faces
Image displaying three different watch face designs for the Sami WS-2372.
There are 3 watch faces. In the current watch face, press and hold the center of the touch screen to choose the one you like.
Daily Activities
Image showing a step counter display with '8678/10000' steps, '5.6' km, and '425' calories.
The watch will record your daily activity automatically. Press the step icon ? to check pedometer, distance, and calories. After synchronizing with the app, these sports data can also be checked in the app.
Heart Rate Monitor
Image showing a heart icon, followed by an arrow, then a heart icon with '-- BPM', and finally a heart icon with '108 BPM'.
Select the ❤️ heart rate icon to monitor your current heart rate. To exit the heart rate monitor, please slide to the right.
If you have connected your smart watch with the app via Bluetooth, you can also check your heart rate data in the app.
Multi-Sport
Images showing icons for 'Go Sport', 'Walking', 'Running', 'Hiking', 'Cycling', and 'History'.
Tap the ? sport icon to enter the multi-sport mode. The smart watch has 4 sports modes: walking, running, hiking, and cycling. Choose a sport mode you want, and then do sports. The smart watch will record your exercise data.
Image showing a sports tracking screen with time '7:00', duration '00:32:30', heart rate '128 BPM', pace '06'02"/Km', calories '328 Kcal', distance '6.1 Km', and steps '9198 Steps'.
If you want to end the sports, slide the screen to the right and tap the stop icon ⏹️ to finish your sports and save the data. The smart watch displays your exercise data after that. If you have connected your smart watch with Fit4Kid via Bluetooth, you can also check your exercise data in the app.
Image showing a warning icon with text "Too little data to save".
Note: If the exercise time is less than 5 minutes, the data cannot be saved.
Sleep Monitor
Image showing a sleep icon with '00H 00M' and moon/zzz symbols.
The smart watch automatically monitors your sleep from 10 p.m. to 9 a.m. ? When you get up the next day, the smart watch displays your sleep report about the time of total sleep, light sleep, and deep sleep. If you have connected your smart watch with the app via Bluetooth, you can also check a more detailed sleep report in the app.
Weather
Image showing a 'Connect APP' icon with a question mark.
Images showing weather icons for Cloudy (20°), Rainy (20°), Sunny (20°), and Snowy (-5°).
If you have connected your smart watch with Fit4Kid via Bluetooth, the smart watch will display the weather forecast. You can manually set the city or automatically set a city in the app.
Alarm
Images showing an alarm clock icon with '18:30' and a list of alarm times (06:30, 18:30, 10:50) with days of the week.
By tapping the ⏰ alarm icon, you can see the alarm timers you have set in the app. When the alarm time is up, the alarm icon will be animated, and the smart watch will vibrate.
Notification
Image showing a chat bubble icon with '8'.
Slide the watch face from left to right, and then you can check your phone calls, SMS, QQ, WeChat, Whatsapp, Facebook, and Twitter notifications, etc. ?
Remote Capture
Image showing a camera icon.
To use this feature, make sure the camera of your smart phone is on. With the remote capture function, you can take pictures remotely from your smart watch. ?
Music Playback Control
Image showing music playback controls (previous, play/pause, next, back).
Tap the ? music icon to enter the music playback control interface. You can select the previous/next song, and play/pause music. To exit music playback control, slide the screen from left to right.
Stopwatch
Images showing a stopwatch icon, then a stopwatch running '00:30:30' with a play button, and then '00:30:30' with a pause button.
Press Start to time. To exit Stopwatch, slide the screen from left to right. ▶️ ⏸️ ⏹️
Sedentary Reminder
Image showing an icon of a person sitting, with a toggle switch.
Tap the ? icon to enter the sedentary settings. You can turn the function on or off. Slide the screen to the right to exit. You can also go to "Activity&Wellness" under the "Health Reminder" section of the app to set time intervals (minutes), start time, and end time.
Children Games
Image showing a game controller icon.
Tap this icon ? to enter the watch game function.
Pedometer Game
Image showing a 'Pedometer' button and a 'BEAST MODE' screen with game elements.
Tap this icon to enter the Pedometer game. Completing the corresponding steps will show different characters.
Math Game
Image showing a math problem '5 - ? = 2' and a 'SOLVE' button.
Tap this icon to enter the Math game. Each correct answer is 10 points. If you collect 100 points, you will pass the game.
Puzzle Game
Image showing a 'Puzzle' button and several images of puzzle stages.
Tap this icon to enter the Puzzle game. The final rendering will appear. Tap 9 pictures on the screen to start the game randomly. Tap the picture next to the space to swap positions with the space. After the puzzle is completed, it will enter the next puzzle.
Settings
Image showing icons for Settings (wrench), About (info), Reset (refresh), Restart (sun), and Shut Down (power).
Tap the ⚙️ icon to enter the settings menu.
- About:
Tap the ℹ️ icon to check the Bluetooth Mac address, device name, and firmware version of your smart watch.
- Reset:
Tap the ? icon to reset your smart watch. (Includes confirmation icons ✔️ ❌)
- Restart:
Tap the ☀️ icon to restart your smart watch.
- Shut down:
Tap the ? icon to shut down your smart watch. (Includes confirmation icons ✔️ ❌)
Important Notes & Cleaning
Disclaimer: THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE APPROXIMATE.
Cleaning Instructions:
In order to avoid any damage to the plating or printing of your wearable, please do not use any chemical product for cleaning, such as alcohol 96°. We recommend using a slightly wet cloth.
Technical Specifications
- Display screen: Full screen capacitive touch screen 1.30".
- Screen resolution: 240 x 240 pixels.
- Internal Memory: 32k RAM, 512k ROM
- CPU: Pixart PAR2860QN
- Charge I/O port: USB magnetic charging cable
- Battery: Built-in Li-Polymer 150 mAh
- Stand by time: 10-12 DAYS
- Working time: 3-5 DAYS
- G-Sensor: SC7A20
- Health Sensor: HRS3301
- Bluetooth: v5.1
- Water-resist Rating: IP67 (raindrop resistance. This device is not waterproof; do not drown it into water)
- Weight: 45 g
Declaration of Conformity
Hereby we,
Name of manufacturer: SANTOSHI SL
Address: CALLE FELIPE ASENJO N.56
Zip code & City: 28947 - FUENLABRADA (MADRID)
Country: SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
- Product description: Smart Band
- Type designation(s): WS-2372
- Trademark: SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
- DIRECTIVE EMC 2014/30/EU
- DIRECTIVE LVD 2014/35/EU
- Standard CE (RED): DIRECTIVE 2014/53/EU
- Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
- EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
- EN 62479:2010
- EN 301 489-1 V2.1.1 (2017-02)
- EN 301 489-17 V3.1.1 (2017-02)
- EN 300 328 V2.1.1 (2016-11)
Signature: [Signature Placeholder]
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 21 / 11 / 2022
