Installation Guide for TREND models including: TP60022 Table Lamp, TP60022, TP60022 Lamp, Table Lamp, Lamp
Trend Lighting TP60022AB Perret 4 Light 12 inch Aged Brass Convertible Pendant Ceiling Light
TP60022 (Pendant Installation) INSTALLATION INSTRUCTIONS Please read carefully and save these instructions, as you may need them at a later date. CAUTION WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. GENERAL All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. ASSEMBLY AND INSTALLATION 1. Put swivel (14) through the center hole on canopy (12) and secure with lock nut (11). 2. Choose your desired length of stems (17)(18)(19), and then pass the power supply cord and ground wire through stems (16) (17)(18), washer (15), swivel (14), canopy (12), and lock nuts (11). 3. Connect stems (16) (17)(18) one by one, then attach lower end of stem (18) onto lamp body (19) and upper end of stem (16) into swivel (14). 4. Thread canopy screws (08) into mounting bar(06) and secure with hex nuts (10). 5. Attach mounting bar (06) to outlet box (01) with box screws (09). 6. Make wire connection with white wire (02) and black wire (03). Use wire connectors (05) to secure the connections. Secure ground wire (04) and ground wire from the fixture to mounting bar (06) with ground screw (07). 7. Raise the canopy(12) over the outlet box(01) and secure with the ball nut(13). INSTALLATION IS NOW COMPLETED 01. OUTLET BOX 02. WHITE WIRE 03. BLACK WIRE 04. GROUND WIRE 05. WIRE CONNECTORS 06. MOUNTING BAR 07. GROUND SCREW 08. CANOPY SCREWS 09. BOX SCREWS 10. HEX NUTS 11. LOCK NUTS 12. CANOPY 13. BALL NUT 14. SWIVEL 15. WASHER 16. STEM (L3'') 17. STEM (L6'') 18. STEM (L12'') 19. LAMP BODY TP60022 (Semi Flush Installation) INSTALLATION INSTRUCTIONS Please read carefully and save these instructions, as you may need them at a later date. CAUTION WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. GENERAL All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. ASSEMBLY AND INSTALLATION 1. Pass the power supply cord and ground wire through stem (15), washer (14), canopy (12), and lock nuts (11). 2. Attach lower end of stem (15) into lamp body (16) and upper end into canopy. Secure with lock nut (11). 3. Thread canopy screws (08) into mounting bar(06) and secure with hex nuts (10). 4. Attach mounting bar (06) to outlet box (01) with box screws (09). 5. Make wire connection with white wire (02) and black wire (03). Use wire connectors (05) to secure the connections. Secure ground wire (04) and ground wire from the fixture to mounting bar (06) with ground screw (07). 6. Raise the canopy(12) over the outlet box(01) and secure with the ball nut(13). INSTALLATION IS NOW COMPLETED 01. OUTLET BOX 02. WHITE WIRE 03. BLACK WIRE 04. GROUND WIRE 05. WIRE CONNECTORS 06. MOUNTING BAR 07. GROUND SCREW 08. CANOPY SCREWS 09. BOX SCREWS 10. HEX NUTS 11. LOCK NUT 12. CANOPY 13. BALL NUT 14. WASHER 15. STEM 16. LAMP BODYMicrosoft PowerPoint 2010 Microsoft PowerPoint 2010