Troy Bilt 6000-8811 Horse III Tiller Parts Manual
This document provides detailed parts lists and diagrams for the Troy Bilt 6000-8811 Horse III tiller. It covers various assemblies and systems, including tines, engine start, transmission, controls, and wheels.
For parts inquiries, contact: 606-678-9623 or 606-561-4983. Visit: www.mymowerparts.com Diagrams illustrate the Bolo Tine Assemblies, showing different tine configurations (left and right hand), tine gangs (A, B, C, D), and associated hardware. A legend identifies tine types and edges. Diagrams illustrate the Depth Regulator and Tine Hood Assemblies, showing the components that control tiller depth and protect the tines. This includes levers, brackets, hoods, and mounting hardware. Diagrams detail the Electric Start System for 6, 7, and 8 HP tillers, illustrating the battery, starter motor, solenoid, wiring harnesses, and connections for both Tecumseh and Briggs & Stratton engines. Includes diagrams for recoil and electric start configurations. Diagrams illustrate the Forward/Neutral/Reverse Lever and Yoke Assembly, detailing the components of the gear shifting mechanism, including the lever, yoke, pivot links, and fasteners. Diagrams show the Handlebar Assembly, including components for height adjustment, grips, throttle controls, and mounting hardware. This section covers various parts related to the tiller's steering and control interface. Detailed diagrams and parts lists for the Power Unit Transmission Assemblies. This section covers the internal workings of the transmission, including gears, shafts, bearings, seals, and housing components. Diagrams and parts lists for the Tiller Attachment Transmission Assemblies, covering the components within the tiller's transmission system, including shafts, gears, bearings, seals, and housing. Diagrams and parts lists cover the Wheel Speed Lever, Belt Drive System, Engine mounting, and Wheel & Tire Assemblies. This section includes details on various engine types (Tecumseh, Kohler) and tire configurations.Bolo Tine Assemblies
Ref # Part Number Qty S/P/F Description 1 GW-2415 2 S TINE HOLDER- welded steel. For left or right side of tiller. 2 GW-9669 2 BOLT - hex hd., 1/2"-20 x 4-3/4" long. Mounts Part #2415 welded steel tine holder on tine shaft 3 GW-9914 2 S LOCKWASHER-1/2", holder mounting 4 GW-9952 2 WASHER - flat. Outer dia. 1.500", inner dia. .516",thickness .182". Use with Part 119669 bolt only 5 GW-1205 2 F TINE HOLDER - cast iron. For left or right side of tiller. 6 GW-1463 2 BOLT - hex hd.,1/2"-20 x 5-3/4" long. Mounts Part #1205 cast iron tine holder on tine shaft 7 GW-1461 2 WASHER - flat. Outer dia. 1-3/4", inner dia. 17/32". Use with Part #1463 bolt only 8 GW-1735 1 BOLT & WASHER SET - Includes one each Part #1483 bolt, #9914 lockwasher and #1461 washer. Use with Part 81205 tine holder only 9 GW-9301 2 S KEY - tine shaft 3/16" square x 1" long 10 GW-1270-1A 8 S BOLO TINE - single, Left Hand. Used on left and right side tine assemblies. Tine is stamped either "F1" or "AL" 11 GW-1270-2A 8 S BOLO TINE- single, Right Hand. Used on left and right side tine assemblies. Tine is stamped either "ER" or "AR" 12 GW-9711 16 S BOLT - hex hd., 3/8"-16 x 1", tine mounting 13 GW-9913 16 S LOCKWASHER-3/8" tine mounting 14 GW-9802 16 S NUT- hex, 3/8"-16, tine mounting 15 GW-2253 1 TINE SHIM - used as needed to correct loose-fitting tines mounted on cast iron tine holders only 16 GW-2254 1 TINE SHIM - used as needed to correct loose-fitting tines mounted on cast iron tine holders only GW-1245K 1 S/F TINE REPLACEMENT KIT- unassembled. GW-10355 1 F WELDED STEEL TINE HOLDER REPLACEMENT KIT - Includes one each of Part #2415 welded steel tine holder, #9669 bolt, #9914 lockwasher and #9952 washer. Order two kits if replacing both holders. Depth Regulator & Tine Hood Assemblies
Ref # Part Number Qty S/P/F Description 1 GW-9712 2 S BOLT- hex. hd., 3/8"-16 x 1-1/4", drag bar mounting 2 GW-1113-1 2 S BUSHING - 19/64" (.300") long, drag bar 3 GW-9913 2 S LOCKWASHER - spring lock 3/8" 4 GW-9802 2 S NUT - hex., 3/8"-16 5 GW-1117A 1 S BAR - depth regulator Includes #9119 knob (Ref. 07) and M20 retaining ring (Ref. M6) 6 GW-9120 1 /P RING - retaining (tolerance ring) 7 GW-9119 1 /P KNOB- depth regulator 8 GW-2121 1 S BAR - drag, depth regulator 9 GW-9552 4 S SCREW - thread forming, 1/4"-20 x 1/2", (lockwasher and nut not required). Mounts hood to bracket; Replaces 9723 10 GW-9703 4 S BOLT - hex. hd., 5/16"-18 x 3/4" hood to tiller housing and hood bracket to rear bearing cap 11 GW-9912 4 S LOCKWASHER - spring lock, 5/16" 12 GW-9929 2 /P WASHER - flat, 5/16" 13 GW-2470 1 /P HOOD tine cover with hinged flap Includes hood decals (Ref. #14 and 15) 14 GW-2413 1 S DECAL - hood, operating Instructions 15 GW-1238 1 S DECAL- model name (HORSE) 16 GW-2527 1 /P BRACKET- tine hood and depth regulator Replaces 2255 17 GW-9308 1 S PIN - roll (spirol), 1/4" x 1" long 18 GW-9438 1 S SPACER 19 GW-9384 1 S SPRING 20 GW-9734 1 S BOLT - hexhd., 1/4"-20 x 1" 21 GW-9811 1 S LOCKNUT - 1/4"-20 Electric Start System (6HP, 7HP, & 8HP Tillers)
Ref # Part Number Qty S/P/F Description 1 GW-9295 2 S CABLE-battery, positive and negative terminals 2 GW-9255 2 RUBBER BOOT- terminal insulating 3 GW-9552 3 S SCREW -self threading, 1/4"-20 x 1/2", one for grounding negative cable and two for mounting solenoid to bracket 4 GW-9703 2 S BOLT- hex. hd., 5/16"-18 x 3/4", battery terminals 5 GW-9801 2 S NUT -hex., 5/16"-18, battery terminals 6 GW-2241 1 S BATTERY HOLD-DOWN CLAMP- with attached Key Switch Plate (includes #20418 decal). Introduced on Tiller Serial #648406. Use with #2182 battery bracket; Replaces 1468 7 GW-20418 1 S DECAL - key switch instructions 8 GW-9230 1 KEY SWITCH - includes two 89243 keys, one lockwasher and one mounting nut (hardware not available separately from Garden Way) 9 GW-9243 1 S KEY -ignition, one pair 10 GW-9565 2 BOLT - carriage, 1/4"-20 x 1-1/2", hold-down clamp to bracket 11 GW-9910 2 S LOCKWASHER - spring lock 1/4" 12 GW-9800 2 S NUT - hex., 1/4"-20 13 GW-9092B 1 S BATTERY - 12 volt, 30 amperes, side-vented. Comes with Part #9009 vent tube. IMPORTANT: For Tiller Serial Nos. 685484 & Below, contact Technical Service 9123, Department regarding special battery replacement kit before ordering battery; Replaces 94878 14 GW-1959 1 /P SOLENOID - starter, includes all washers and nuts (Ref. No's. 15, 16, 17 & 18) for cables and wires; Replaces 9127 15 GW-9912 2 S LOCKWASHER-springlock, 5/16", solenoid left and right posts 16 GW-9826 2 S NUT - hex., 5/16"-24, solenoid left and right posts 17 GW-9921 1 S LOCKWASHER-external tooth, #10, solenoid center post 18 GW-9809 1 S NUT - hex., 10-32, center post on solenoid 19 GW-9223 1 CABLE - solenoid to starter motor 20 GW-2182 1 BATTERY BRACKET- introduced on Tiller Serial #648406. Use with 52241 clamp; Replaces 1169 21 GW-9558 2 BOLT - hex. hd., 3/8"-16 x 1-1/2", bracket to transmission cover Replaces 9713 22 GW-9913 2 S LOCKWASHER - springlock, 3/8" 23 GW-9265 1 /P TIE- twist, red plastic, wire retaining 24 GW-9009 1 /P VENT TUBE - 5/16" dia. 25 GW-1475 1 SHIELD - vent tube, 1/2" dia. 26 GW-9224 1 CLAMP- vent tube shield 27 GW-9202 1 S TIE -red plastic 28 GW-1552 1 WIRE HARNESS - for Tecumseh and Kohler engines; Includes two receptacles; three red wires (solenoid activate, battery recharge, and starter switch); one green (shutoff) wire; plastic harness tube 29 GW-9218 1 /P CLIP-metal, supports recharging wire on Tecumseh engine 30 1 FUSE - 6 Amperes, 3 AGC, for Tecumseh engine (earlier models only). Available locally or from Garden Way (Tecumseh x 29561) 31 1 DIODE - battery recharging for Tecumseh engine. For authorized service dealer replacement (Tecumseh #610935) 32 GW-9910 1 S LOCKWASHER-springlock, 1/4", for Tecumseh and Kohler engines 33 GW-9800 1 S NUT - hex., 1/4"-20 For all engines 34 GW-20424 1 WIRE HARNESS - for Briggs and Stratton engine. Complete assembly only.; Includes key switch receptacle with two red wires (with eyelets), one green wire, plastic harness tube. Order red recharging wire (Ref. No. 35) separately, if needed 35 GW-1554 1 S WIRE-recharge (red), for Briggs & Stratton engine. Includes terminal and eyelet 36 GW-9266 A/R S TIE - plastic, reusable 37 1 LOCKWASHER - internal tooth, 1/4" Comes with engine-not avail. from Garden Way Forward/Neutral/Reverse Lever & Yoke Assembly
Ref # Part Number Qty S/P/F Description 1 GW-2176 1 S LEVER - forward/neutral/reverse Includes plastic knob with plastic decal inlay. Lever and knob available as complete assembly only 2 GW-2163 1 S SPRING - clutch pawl 3 GW-9466 3 S BOLT - hex. hd., 5/16"-18 x 1-1/2" 4 GW-2447 3 /P BUSHING - 3/8" long Replaces 2160 5 GW-9931 3 S LOCKWASHER - external tooth, 5/16" 6 GW-9801 3 S NUT - hex., 5/16"-18 7 GW-2162 1 S ROLLER ASSEMBLY -forward/neutral/reverse shift lever 8 GW-2165-1 1 S YOKE - left side 9 GW-2165-2 1 S YOKE - right side 10 GW-2164 2 S LINK- yoke pivot, left and right, & 7/8" long 11 GW-9710 6 S BOLT - hex. hd., 3/8"-18 x 1" 12 GW-9913 6 S LOCKWASHER - spring lock, 3/8" 13 GW-9904 6 S WASHER - flat, 3/8", S.A.E 14 GW-2146 2 /P BUSHING - spacer, 21/64"/.325") long, yoke to engine mount 15 GW-9802 2 S NUT - hex., 3/8"-16 16 GW-1113-1 4 S BUSHING - spacer, 19/64" (.300") long, yoke link 17 1 KNOB - plastic knob not available separately due to special procedure required to attach knob to lever Handlebar Assembly
Ref # Part Number Qty S/P/F Description 1 GW-1167 1 CLAMP-T-bar, handlebar mounting For recoil or electric start models 2 GW-9915 1 S LOCKWASHER-spring lock 5/8" 3 GW-9119 1 /P KNOB -handlebar height adjustment 4 GW-9120 1 /P RING- retaining (tolerance ring) 5 GW-1881 1 /P STUD - handlebar height adjustment Includes #9119 knob (Ref. #3) and #9803 nut (Ref. #6) 6 GW-9803 1 S NUT- hex., 1/2"-13 7 GW-1021-1 1 S CLAMP- handlebar height adjustment,left 8 GW-1020-1 1 S RATCHET- handlebar height adjustment, left 9 GW-1020-2 1 S RATCHET- handlebar height adjustment, right 10 GW-1021-2 1 S CLAMP - handlebar height adjustment, right 11 GW-1019 1 BASE- handlebar mounting 12 GW-2214 1 HANDLEBAR AND PANEL ASSEMBLY (Includes Ref. No. 14, #2230 Decal, and two Ref. No. 13, #9118 Grip) 13 GW-9118 2 S GRIP-handlebar 14 GW-2412 2 /P DECAL- power unit operating instructions 15 GW-9733 2 /P SCREW - pan hot., #10-32 x 1/2", self-tapping 16 GW-9015 1 THROTTLE LEVER AND CABLE ASSEMBLY for 6 HP Tecumseh, 7 HP Kohler and 8 HP Briggs & Stratton engines. Does not include Ref. No. 15, #9733 Screw or Ref. No.18, 89116 Clip; Replaces 9240 GW-9967 1 THROTTLE LEVER AND CABLE ASSEMBLY For use with the 7 HP Tecumseh engine only 17 GW-9033 1 THROTTLE LEVER AND CABLE ASSEMBLY for 8 HP Kohler engine. Does not include Ref. No. 15, #97333 screw or Ref. No. 18, #9116 Clip 18 GW-9202 2 S TIE - plastic Secures throttle cable Replaces 9116 19 GW-2449 1 DECAL- throttle operation For Tecumseh and Kohler model engines only Power Unit Transmission Assemblies
Ref # Part Number Qty S/P/F Description 1 GW-9782 3 S BOLT - hex. hd., #10-32 x 3/8", self locking flange TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 2 GW-9463 1 /P KNOB - tines/P.T.O. clutch lever, tapered, plastic TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 3 GW-2263 1 /P DETENT PLATE - tines/P.T.O. clutch lever Includes #2139 operating decal (Ref. #4); TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 4 GW-2139 1 S DECAL - operating instructions, detent plate TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 5 GW-9558 4 BOLT - hex hd., 3/8"-16 x 1-1/2",transmission cover Replaces 9713; TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 6 GW-9913 4 S LOCKWASHER-springlock, 3/8" TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 7 GW-9575 1 S BOLT- hex. hd., 5/16"-18 x 3/4", Grade 5, lever bracket to housing TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 8 GW-9912 1 S LOCKWASHER - spring lock, 5/16" TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 9 GW-9902 1 S WASHER - flat, 5/16", S.A.E TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 10 GW-2149 1 S BRACKET- shift levers TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 11 GW-9362 1 /P PIN - spring, 1/8" diameter TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 12 GW-9838 1 NUT-castle (slotted), 1/2"-20 Call Technical Service Department for tightening Instructions; TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 13 GW-9934 1 /P WASHER - shoulder, 1/2" (shoulder faces disc washers) TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 14 GW-9932 2 /P WASHER - disc spring (concave surfaces face each other) TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 15 1 LEVER - wheel speed shift Shown for reference only; TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 16 GW-1103 1 COVER- power unit transmission housing TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 16A GW-1508 1 S COVER - power unit transmission housing Completely assembled with neutral spring assembly parts (Ref. #'s 18,19,20, 21,22, 23 and 24); TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 17 GW-1123 1 /P GASKET- transmission cover TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 18 GW-9751 1 S BOLT - hex. hd., 5/16"-18 x 1", Grade 5 Retains neutral plunger (REMOVE WITH CARE). See Ref. #'s 20 & 21; TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 19 GW-9801 1 S NUT- hex., 5/16"-18 TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 20 GW-1496 1 S SPRING- neutral plunger (REMOVE WITH CARE) TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 21 GW-1035 1 /P PLUNGER -neutral (REMOVE WITH CARE) Includes #9504 clip ring (Ref. #22); TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 22 GW-9504 1 S CUP RING - retains neutral plunger TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 23 GW-9831 1 S NUT- hex., flange locknut, 3/8"-16 TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 24 GW-9558 1 BOLT- hex. hd., 3/8"-16 x 1-1/2", threaded full length TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES 25 GW-2122 1 S LEVER - eccentric, tines/P.T.O. clutch TINES/P.T.O. CLUTCH LEVER ASSEMBLY; (Also see Ref. #'s 1, 2, 3 and 4 listed above.) 26 GW-9743 1 S BOLT - hex. hd., 1/4"-20 x 1/2" TINES/P.T.O. CLUTCH LEVER ASSEMBLY 27 GW-2123 1 S BUSHING -tines/P.T.O. clutch lever eccentric shaft TINES/P.T.O. CLUTCH LEVER ASSEMBLY 28 GW-9516 2 /P RETAINING RING - (snap ring), external TINES/P.T.O. CLUTCH LEVER ASSEMBLY 29 GW-2130 1 S ECCENTRIC - shaft, tines/P.T.O. clutch lever TINES/P.T.O. CLUTCH LEVER ASSEMBLY 30 GW-9911 1 /P LOCKWASHER- Hi-collar, 1/4" TINES/P.T.O. CLUTCH LEVER ASSEMBLY 31 GW-9672 1 S SCREW - socket hd., 1/4"-20 x 3/8" For use with Tiller Serial Nos. 771566 & Above.; TINES/P.T.O. CLUTCH LEVER ASSEMBLY 32 GW-50043 2 S WASHER- shoulder (drive shaft) DRIVE SHAFT ASSEMBLY 33 GW-9500 1 S RETAINING RING -(snap ring), external Retains dog clutch to drive shaft; DRIVE SHAFT ASSEMBLY 34 GW-21203 1 DOG CLUTCH - power unit Replaces 2120-2; For use with Tiller Serial Nos. 771566 & Above. For Serial Nos. 771565 & Below order #2120-2 dog clutch; DRIVE SHAFT ASSEMBLY 35 GW-9301 3 S KEY - 3/16" square x 1" (used on drive shaft and pinion shaft); DRIVE SHAFT ASSEMBLY 36 GW-9655 1 S BOLT - hex. hd., 5/16"-24 x 3/4", self-locking flange, Grade 5 Replaces 9799; DRIVE SHAFT ASSEMBLY 37 GW-9944 1 S WASHER - disc spring (concave). Domed side of washer faces bolt head DRIVE SHAFT ASSEMBLY 38 GW-2107 1 /P PULLEY - transmission drive, cast iron DRIVE SHAFT ASSEMBLY 39 GW-50027 1 /P WASHER-flat, hardened shoulder, 1-1/4" DRIVE SHAFT ASSEMBLY 40 GW-9701 3 S BOLT- hex. hd., 1/4"-20 x 3/4", front bearing cap DRIVE SHAFT ASSEMBLY 41 GW-9910 3 S LOCKWASHER-springlock, 1/4" DRIVE SHAFT ASSEMBLY 42 GW-2424 1 S CAP - front bearing Replaces 1114; DRIVE SHAFT ASSEMBLY 43 GW-9600 1 S SEAL-oil front bearing cap DRIVE SHAFT ASSEMBLY 44 GW-1124-2 1 S GASKET- front bearing cap DRIVE SHAFT ASSEMBLY 45 GW-1224-1 A/R S SHIM - front bearing cap, .010" thick DRIVE SHAFT ASSEMBLY 45 GW-1224-2 A/R S SHIM - same as above, .030" thick DRIVE SHAFT ASSEMBLY 45 GW-1224-3 A/R S SHIM - same as above, .005" thick DRIVE SHAFT ASSEMBLY 45 GW-1224-4 A/R S SHIM- same as above, .062" thick DRIVE SHAFT ASSEMBLY 46 GW-1714 2 S BEARING & CUP - tapered cone roller bearing with cup (race). Cone and cup sold as set only DRIVE SHAFT ASSEMBLY 47 GW-1985 1 SHAFT - main drive, power unit Includes welded-on worm, two pressed-on cone roller bearings, two bearing cups, and two shoulder washers; DRIVE SHAFT ASSEMBLY 48 GW-9617 1 S SEAL - oil, drive shaft, rear DRIVE SHAFT ASSEMBLY 49 GW-9517 1 S RETAINING RING -(snap ring), internal. Retains rear bearing cup DRIVE SHAFT ASSEMBLY 50 GW-9309 2 S PIN-roll (spirol, 1/4" x 2", retains #1060A plug (Ref.#51) PINION SHAFT ASSEMBLY 51 GW-1060A 2 /P PLUG-retaining, pinion bearing Includes #98040 - Ring (Ref. #52); PINION SHAFT ASSEMBLY 52 GW-9604 2 /P O-RING - retaining plug PINION SHAFT ASSEMBLY 53 GW-1132-1 A/R /P SHIM - retaining plug, 1-1/64" inner dia., .033" thick. Note: On right side only, one #1132-1 shim is also used between bearing and washer (Ref #'s 54 & 55); PINION SHAFT ASSEMBLY 53 GW-1132-2 A/R /P SHIM- same as above, .062" thick PINION SHAFT ASSEMBLY 53 GW-1132-3 A/R /P SHIM - same as above, .010" thick PINION SHAFT ASSEMBLY 54 GW-9404 2 /P BEARING - ball, pinion shaft PINION SHAFT ASSEMBLY 55 GW-1126 2 /P WASHER - pinion shaft One used on left and right sides.; PINION SHAFT ASSEMBLY 56 GW-1222 1 /P STEM PINION - slow speed gear and shaft (drives slow speed wheel gear) PINION SHAFT ASSEMBLY 57 GW-9502 1 /P RETAINING RING - (snap ring), external. Retains high speed pinion gear to bronze worm gear PINION SHAFT ASSEMBLY 58 GW-1221 1 WORM GEAR - bronze, wheel drive. Driven by worm on drive shaft PINION SHAFT ASSEMBLY 59 GW-9300 1 /P KEY-3/16" square x 5/8" Connects fast speed pinion gear to bronze worn gear PINION SHAFT ASSEMBLY 60 GW-1233 1 /P GEAR- fast speed pinion (drives fast speed wheel gear) PINION SHAFT ASSEMBLY 61 GW-9609 2 S SEAL-oil, wheel shaft WHEEL SHAFT ASSEMBLY 62 GW-9511 2 S RETAINING RING-(snapring), external. Retains wheel shaft inside bore WHEEL SHAFT ASSEMBLY 63 GW-1166-1 A/R S SHIM- wheel shaft, 1-1/64" inner dia, .062" thick WHEEL SHAFT ASSEMBLY 63 GW-1166-2 A/R /P SHIM - same as above, .030" thick WHEEL SHAFT ASSEMBLY 63 GW-1166-3 A/R /P SHIM - same as above, .015" thick WHEEL SHAFT ASSEMBLY 63 GW-1166-4 A/R S SHIM - same as above, .010" thick WHEEL SHAFT ASSEMBLY 63 GW-1166-5 A/R S SHIM -same as above, .005" thick WHEEL SHAFT ASSEMBLY 64 GW-1086 2 S BUSHING-bronze, wheel shaft bearing WHEEL SHAFT ASSEMBLY 65 GW-1878 1 /P SHAFT - wheel, 15-5/8" Includes #9357 key (Ref. #66) and two #9511 retaining rings (Ref. #62); WHEEL SHAFT ASSEMBLY 66 GW-9357 1 S KEY- Hi Pro, 1/4" x 1 3/4" Connects wheel shaft to clutch WHEEL SHAFT ASSEMBLY 67 GW-1223 1 /P GEAR- slow speed, wheel drive WHEEL SHAFT ASSEMBLY 68 GW-1232 1 /P GEAR- fast speed, wheel drive WHEEL SHAFT ASSEMBLY 69 GW-1237 1 /P DOG CLUTCH - wheel drive. Clutch drives either slow or fast wheel drive gears according to wheel speed shift lever gear selection WHEEL SHAFT ASSEMBLY 70 GW-1112 3 /P PIN - clutch guide, 1/4" diameter WHEEL SHAFT ASSEMBLY 71 GW-9307 1 S PIN-roll (spirol), 3/16" x 1-1/4". Retains eccentric lever to eccentric shaft ECCENTRIC SHAFT ASSEMBLY 72 GW-1029 1 S LEVER- eccentric, wheel speed shifting ECCENTRIC SHAFT ASSEMBLY 73 GW-9622 1 S SEAL -oil, eccentric shaft Replaces 9611; ECCENTRIC SHAFT ASSEMBLY 74 GW-1442 1 S PIN - eccentric shaft, wheel speed shifting ECCENTRIC SHAFT ASSEMBLY 75 GW-1568 1 S ECCENTRIC SHAFT- wheel speed shifting ECCENTRIC SHAFT ASSEMBLY 76 GW-1441 1 /P SPRING - eccentric shaft ECCENTRIC SHAFT ASSEMBLY 77 GW-1440 1 S WASHER- eccentric shaft ECCENTRIC SHAFT ASSEMBLY 78 GW-2260 1 S HOUSING - power unit transmission Includes #9359 alignment pin (Ref. #79); TRANSMISSION HOUSING; Empty housing without covers, shafts, gears, seals, etc. Call Factory Technical Service Dept before ordering; TRANSMISSION HOUSING 79 GW-9359 1 /P PIN -alignment (aligns power unit housing with tiller attachment housing) TRANSMISSION HOUSING 80 GW-9660 2 BOLT-hex. hd., 1/2"-13 x 2", Grade 5. Connects power unit and tiller attachment housings MISCELLANEOUS PARTS 81 GW-9928 2 /P WASHER-disc spring (concave). Dome side of washer faces bolt head MISCELLANEOUS PARTS 82 GW-2126 2 POST- with threaded hole for #9560 bolt (Ref. #60); MISCELLANEOUS PARTS 83 GW-9726 2 S PLUG - pipe, 1/4". Oil level check plug and oil drain plug MISCELLANEOUS PARTS 84 GW-9122 1 /P PLUG - red plastic, thread protector MISCELLANEOUS PARTS 85 GW-4921-1 1 OIL SEAL DRIVER - for wheel shaft oil seals (use with Part #4921-2 Driver Guide); MISCELLANEOUS PARTS 86 GW-4921-2 1 OIL SEAL DRIVER GUIDE - for wheel shaft oil seals (use with Part #4921-1 Seal Driver); MISCELLANEOUS PARTS Tiller Attachment Transmission Assemblies
Ref # Part Number Qty S/P/F Description 1 GW-9780 5 S BOLT - hex. hd., 1/4"-20 x 5/8", self-locking flange TILLER TINE SHAFT ASSEMBLY 2 GW-2451 1 S COVER- tiller housing Includes five #9780 bolts (Ref.No.1); TILLER TINE SHAFT ASSEMBLY 3 GW-1129-1 1 S GASKET- tiller housing cover, .010" thick TILLER TINE SHAFT ASSEMBLY A/R 3 GW-1129-2 1 S GASKET- same as above, .030" thick TILLER TINE SHAFT ASSEMBLY A/R 4 GW-1026A 1 /P SHAFT-tiller tine Includes #1104 key(Ref. #7); TILLER TINE SHAFT ASSEMBLY 5 GW-11522 2 BEARING & CUP - tapered cone roller bearing with cup (race). Cone and cup sold as set only TILLER TINE SHAFT ASSEMBLY includes 741-3050 cup and 741-3051 cone. Use with GW-11527 6 GW-1064 1 S WORM GEAR-bronze, tiller tine shaft. Driven by worm on tiller driven shaft TILLER TINE SHAFT ASSEMBLY Use GW-11527 6 GW-11527 1 /P Kit-Tiller Gear, Cones & Cups. TILLER TINE SHAFT ASSEMBLY includes two 741-3050 cups and two 741-3051 cones. Use with GW-11522 7 GW-1104 1 /P KEY - tiller tine shaft. Woodruff key with ends ground TILLER TINE SHAFT ASSEMBLY 8 GW-9618 2 S SEAL-oil, tiller tine shaft Replaces 9616; TILLER TINE SHAFT ASSEMBLY 9 GW-9500 2 S RETAINING RING -(snapring),external. Retains dog clutch to shaft TILLER DRIVE SHAFT ASSEMBLY 10 GW-2120-1 1 S DOG CLUTCH - tiller drive shaft TILLER DRIVE SHAFT ASSEMBLY 11 GW-9301 1 S KEY-3/16" square X 1",dog clutch to tiller driveshaft TILLER DRIVE SHAFT ASSEMBLY 12 GW-2127 1 /P SPRING - dog clutch TILLER DRIVE SHAFT ASSEMBLY 13 GW-1138-1 1 S SHIM - dog clutch, 1/16" (.062") thick TILLER DRIVE SHAFT ASSEMBLY 14 GW-9773 3 S BOLT - hex. hd., 1/4"-20 x 7/8", self locking flange TILLER DRIVE SHAFT ASSEMBLY 15 GW-1115 1 S CAP -rear bearing TILLER DRIVE SHAFT ASSEMBLY 16 GW-1124-2 1 S GASKET -rear bearing cap TILLER DRIVE SHAFT ASSEMBLY 17 GW-1224-1 1 S SHIM - front bearing cap, .010" thick TILLER DRIVE SHAFT ASSEMBLY A/R 17 GW-1224-2 1 S SHIM - same as above, .030" thick TILLER DRIVE SHAFT ASSEMBLY A/R 17 GW-1224-3 1 S SHIM - same as above, .005" thick TILLER DRIVE SHAFT ASSEMBLY A/R 17 GW-1224-4 1 S SHIM - same as above, .062" thick TILLER DRIVE SHAFT ASSEMBLY A/R 18 GW-1714 2 S BEARING & CUP - tapered cone roller bearing with cup (race). Cone and cup sold as set only TILLER DRIVE SHAFT ASSEMBLY 19 GW-1986 1 SHAFT- main tiller drive ; TILLER DRIVE SHAFT ASSEMBLY Includes welded-on worm gear, two pressed-on cone roller bearings, two bearing cups (Ref.#18) and one shoulder washer .766 X 1.0 20 GW-9617 1 S SEAL- oil, drive shaft, front TILLER DRIVE SHAFT ASSEMBLY 21 GW-9517 1 S RETAINING RING -(snapring),internal. Retains front bearing cup TILLER DRIVE SHAFT ASSEMBLY 22 GW-50043 1 S WASHER - shoulder (drive shaft) TILLER DRIVE SHAFT ASSEMBLY 23 GW-2206 1 HOUSING - tiller attachment TRANSMISSION HOUSING AND DIPSTICK Includes pressed-on sleeve in front of housing and one tine shaft bearing cone 741-3051 & cup 741-3050 mounted in right side of housing. 24 GW-2136 1 DIPSTICK- oil level, tiller attachment TRANSMISSION HOUSING AND DIPSTICK 25 N/A 1 OIL SEAL DRIVER - for tiller shaft oil seals Purchase locally 26 GW-9945 8 WASHER-1/4",plastic MISCELLANEOUS PARTS 737-04040 1 /P Transmission Oil, Gear. Quart Wheel Speed Lever, Belt Drive System, Engines, Wheels
Ref # Part Number Qty S/P/F Description 1 GW-9362 1 /P PIN - spring, 1/8" dia., retains castle nut to threaded stud 2 GW-9838 1 NUT-castle (slotted), 1/2"-20. 3 GW-9934 1 /P WASHER- shoulder, 1/2" (shoulder faces disc washers) 4 GW-9932 2 /P WASHER- disc spring (concave surfaces face each other) 5 GW-2261 1 S LEVER - wheel speed shift Includes #2244 knob (Ref. #8) and 199120 retaining ring (Ref. #18) 6 GW-2244 1 S KNOB - wheel speed shift lever Includes #9120 retaining ring (Ref. 1118) and plastic decal inlay 7 GW-9317 1 /P PIN - cotter, 3/32" x 1" 8 GW-1231 1 /P ROD - connecting rod, wheel speed shift lever 9 GW-1033 1 /P SWIVEL - connecting rod 10 GW-9902 1 S WASHER - flat, 5/16", S.A.E. 11 GW-9338 1 S PIN - hair cotter 12 GW-9608 1 LOCKNUT-hex. hd., 5/16"-18, retains swivel to eccentric lever 13 GW-9710 5 S BOLT - hex. hd., 3/8"-16 x 1" 14 GW-9913 6 S LOCKWASHER - springlock, 3/8" 15 GW-9904 7 S WASHER - flat, 3/8", S.A.Ε. 9903 16 GW-2146 2 /P BUSHING - spacer, 21/64" (.325") long, yoke to engine mount 17 GW-1113-1 2 S BUSHING - spacer, 19/64" (.300") long, yoke link to retaining plug 18 GW-9120 1 /P RING - retaining (tolerance ring) 19 GW-1920 1 /P BLOCK - belt adjustment, 3-7/8" long Includes mounting hardware and belt adjustment rod (Ref. #'s 13,14,15, & 20 20 GW-2100 1 /P ROD - belt adjustment, 7" long, with measuring gauge 21 GW-9738 1 S BOLT - hex. hd., 3/8"-24 x 1-3/4", engine pulley 22 GW-9715 1 S BOLT - hex. hd., 3/8"-24 x 1-1/2", engine pulley For Kohler and Briggs & Stratton Engines 23 GW-1919 1 /P DISC-reverse, rubber rimmed Includes #1920 belt adjustment block (Ref.#19) GW-2111 1 S DISC ONLY-reverse, rubber rimmed 24 GW-9245 1 /P BELT -forward drive 25 GW-1483 1 S PULLEY- engine P.T.O. (Power Take Off) 26 GW-1138-1 A/R S SHIM - engine pulley, 1/16" thick 26 GW-1138-2 A/R S SHIM - same as above, 1/32" thick 27 GW-9303 1 /P KEY - engine pulley, 3/16" square x 2-1/2" 28 GW-9751 2 S BOLT -hex. hd., 5/16"-18 x 1", Grades. Retains engine mounting bar ENGINES AND ENGINE MOUNT 29 GW-9801 2 S NUT -hex., 5/16"-18 (jam nut) ENGINES AND ENGINE MOUNT 30 GW-1034 2 S BAR- engine mounting ENGINES AND ENGINE MOUNT 31 GW-9147 2 /P PLUG - thread protector, red plastic ENGINES AND ENGINE MOUNT 32 GW-9572 4 S BOLT- hex. hd., 5/16"-24 x 1-1/8", engine mounting ENGINES AND ENGINE MOUNT 33 GW-9912 4 S LOCKWASHER-springlock, 5/16" ENGINES AND ENGINE MOUNT 34 GW-1960 1 MOUNT- engine to tiller Includes four #9572 mounting bolts (Ref.#32); ; ENGINES AND ENGINE MOUNT 35 1 TECUMSEH ENGINE - 6 HP, recoil start, Model HH60, Specification 105126J, solid state electronic ignition, horizontal crankshaft is turned down to 3/4" at PTO end to accept engine pulley; ENGINES AND ENGINE MOUNT 1 TECUMSEH ENGINE - 6 HP, electric start, Model HH-60, Specification 105127J Same as Part No. 10226 engine, but with electric start.; ENGINES AND ENGINE MOUNT 1 7 HP TECUMSEH ENGINE-Recoil start Model #HMXL700.132501; ENGINES AND ENGINE MOUNT 1 7 HP TECUMSEH ENGINE-Electric start Model #HMXL70-132502; ENGINES AND ENGINE MOUNT 1 KOHLER ENGINE-8 HP Magnum, recoil start Model M8T, Specification P5.301512, solid state electronic ignition, horizontal crankshaft is turned down to 3/4" at PTO end to accept engine pulley; ENGINES AND ENGINE MOUNT 1 KOHLER ENGINE - 8 HP Magnum, electric start Model MBS, Specification PS-301513. Same as Part No. 10203 engine, but with electric start. For use with tillers already equipped with Key Switch Starting System (GRID D-13); ENGINES AND ENGINE MOUNT 36 GW-9322 2 S PIN -roll (spirol, 5/16" x 1-1/2" long, wheel hub to shaft WHEEL & TIRE ASSEMBLIES 37 GW-9142 2 S WHEEL & TIRE ASSEMBLY - standard tread, LEFT SIDE 4:00/4:80 x 8" tubeless tire with valve stem, mounted on single-piece steel wheel. WHEEL & TIRE ASSEMBLIES 38 GW-9143 1 S/F WHEEL & TIRE ASSEMBLY - bar tread, LEFT SIDE 4:80 x 8" tubeless tire with valve stem, mounted on single-piece steel wheel. WHEEL & TIRE ASSEMBLIES 38A GW-9144 1 S/F WHEEL & TIRE ASSEMBLY - bar tread, RIGHT SIDE. Same as #9143 but for right side of tiller; WHEEL & TIRE ASSEMBLIES 39 GW-9145 2 S CAP - wheel hub WHEEL & TIRE ASSEMBLIES
