Shenzhen VanTop Technology & Innovation Co., Ltd. BTN10R True Wireless Earbuds User Manual
Introduction
Welcome to the user manual for the VanTop BTN10R True Wireless Earbuds. This guide provides detailed information to help you get the most out of your new earbuds.
Package Contents
- BTN10R True Wireless Earbuds (Left & Right)
- Charging Case
- USB-C Charging Cable
- Ear Tips (Small, Medium, Large)
- User Manual
Diagram of BTN10R
Earbud (Left/Right): Features a touch control area for playback and call management, a built-in microphone for calls, an LED indicator for status, and charging contacts for connection to the charging case.
Charging Case: Contains a USB-C charging port for recharging the case itself, an LED indicator to display the case's charging status, and dedicated slots for securely holding and charging the earbuds.
Getting Started
Charging the Earbuds
To charge the earbuds, place them into the charging case, ensuring the charging contacts on the earbuds align with the pins in the case. The LED indicator on each earbud will illuminate (typically red) while charging and turn off or change color when fully charged. ?
Diagram Description: Illustrates the earbuds being placed inside the charging case, with a focus on the alignment of the charging contacts.
Charging the Charging Case
Connect the provided USB-C charging cable to the charging port on the case and plug the other end into a compatible power source. The LED indicator on the case will blink (typically red) during charging and become solid when fully charged. ?
Diagram Description: Shows the charging case connected to a power adapter or USB port using a USB-C cable.
Pairing
1. Ensure Bluetooth is enabled on your smartphone, tablet, or other Bluetooth-enabled device.
2. Open the charging case with the BTN10R earbuds inside. The earbuds will automatically enter pairing mode, indicated by flashing LED lights.
3. On your device, navigate to the Bluetooth settings and select "BTN10R" from the list of available devices. ?
4. Once successfully paired, the LED indicators on the earbuds will typically turn off or show a steady light, indicating a stable connection.
Diagram Description: A visual representation of a smartphone's Bluetooth settings screen, highlighting the selection of "BTN10R" from a list of discoverable devices.
Wearing the Earbuds
For optimal sound quality and a secure fit, select the ear tips that best match your ear canal size. The package includes Small, Medium, and Large ear tips.
Insert the chosen earbud into your ear, then gently twist it until it feels snug and stable. A proper fit ensures passive noise isolation and prevents the earbuds from falling out during movement.
Diagram Description: Step-by-step illustration showing how to insert an earbud into the ear and the correct way to twist it for a secure fit.
Operation
Music Playback
- Play/Pause: Single tap the touch control area on either earbud. ▶️ / ⏸️
- Next Track: Double-tap the touch control area on the right earbud. ⏭️
- Previous Track: Double-tap the touch control area on the left earbud. ⏮️
Call Functions
- Answer/End Call: Single tap the touch control area on either earbud. ?
- Reject Call: Press and hold the touch control area on either earbud for approximately 2 seconds. ??
Voice Assistant
To activate your device's voice assistant (e.g., Siri, Google Assistant), triple-tap the touch control area on either earbud. ?️
Resetting the Earbuds
If you encounter issues or wish to reset the earbuds to factory settings:
- Place both earbuds back into the charging case.
- Press and hold the touch control area on both earbuds simultaneously for about 10 seconds.
- The LED indicators on the earbuds will flash red twice, confirming the reset.
Diagram Description: Close-up view of the earbuds, indicating the location of the touch control areas.
Troubleshooting & FAQ
No Sound: Ensure the earbuds are charged and properly connected via Bluetooth. Verify that the volume on your connected device is turned up. Check that the correct audio output is selected on your device.
Cannot Pair: Confirm that the earbuds are in pairing mode (LEDs flashing). Try turning Bluetooth off and then on again on your device. As a last resort, reset the earbuds as described above.
Low Volume: Check the volume levels on both the earbuds (via touch controls if applicable) and your connected device. Ensure the earbuds are fitted correctly in your ears for optimal sound isolation.
One Earbud Not Working: Make sure both earbuds are adequately charged. Try resetting the earbuds. If the issue persists, ensure the earbuds are correctly paired and that no specific settings on your device are limiting audio to one side.
Specifications
| Feature | Specification |
|---|---|
| Model | BTN10R |
| Bluetooth Version | 5.0 |
| Playtime | Up to 4 hours (earbuds only), up to 20 hours (with charging case) |
| Charging Time | Approx. 1.5 hours (earbuds), Approx. 2 hours (charging case) |
| Water Resistance | IPX4 (splash proof) |
| Driver Size | 6mm Dynamic Drivers |
| Frequency Response | 20Hz - 20kHz |
| Battery Capacity | Earbuds: 40mAh (each), Charging Case: 400mAh |
| Input | 5V/1A (USB-C) |
| Supported Codecs | SBC, AAC |
| Working Range | Up to 10 meters (33 feet) |
Safety & Warranty
Safety Precautions:
- Do not expose the earbuds or charging case to extreme temperatures (hot or cold).
- Do not attempt to disassemble or modify the product.
- Keep the product away from liquids and moisture.
- Avoid listening at excessively high volumes for prolonged periods to prevent hearing damage.
- Keep out of reach of small children.
Warranty Information: For detailed warranty information, please refer to the separate warranty card included in the package or visit the official VanTop website.
