Electro-HarmonixSupport - Electro-HarmonixUser Manual for electro-harmonix models including: East River Drive Classic Overdrive Pedal, East River Drive, Classic Overdrive Pedal
Support - Electro-Harmonix
1 EAST RIVER DRIVE Congratulations on your purchase of the East River Drive, a classic overdrive in a compact, pedalboard-friendly enclosure.
2021-07-31 — Congratulations on your purchase of the East River Drive, a classic overdrive in a compact, pedalboard-friendly enclosure. The East River Drive maintains ...
File Info : application/pdf, 2 Pages, 96.44KB
DocumentDocumentEAST RIVER DRIVE Congratulations on your purchase of the East River Drive, a classic overdrive in a compact, pedalboard-friendly enclosure. The East River Drive maintains the character of your guitar and playing style while adding an edge to your tone that ranges from mild overdrive to gritty distortion. True bypass switching keeps your tone intact when the pedal is bypassed. - CONTROLS - DRIVE Knob Controls the amount of input gain. As you turn DRIVE clockwise, the overdrive ranges from mild edge to classic distortion. TONE Knob Emphasizes a range of tones; from bass to treble as the TONE knob is turned clockwise. VOL Knob Sets the output volume of the EAST RIVER DRIVE. FOOTSWITCH and LED The footswitch selects whether the EAST RIVER DRIVE is engaged or in true bypass mode. When the effect is engaged, the LED will be lit. INPUT jack This ¼" jack is the audio input for the EAST RIVER DRIVE. The input impedance is 375k. AMP jack This ¼" jack is the audio output from the EAST RIVER DRIVE. The output impedance is 250. 9V Power Jack The EAST RIVER DRIVE can run off of a 9V battery or you can use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power jack, such as the EHX9.6DC-200. The AC Adapter must have a center negative plug. The battery may be left in or taken out when using an AC Adapter. The EAST RIVER DRIVE has a current draw of 6mA at 9VDC. - CHANGING THE BATTERY - To change the 9-volt battery, you must remove the 4 screws on the bottom of the EAST RIVER DRIVE. Once the screws are removed, you can take off the bottom plate and change the battery. Please do not touch the circuit board while the bottom plate is off or you risk damaging a component. 1 - WARRANTY INFORMATION Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term. If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date. United States & Canada EHX CUSTOMER SERVICE ELECTRO-HARMONIX c/o NEW SENSOR CORP. 47-50 33RD STREET LONG ISLAND CITY, NY 11101 Tel: 718-937-8300 Email: info@ehx.com Europe JOHN WILLIAMS ELECTRO-HARMONIX UK 13 CWMDONKIN TERRACE SWANSEA SA2 0RQ UNITED KINGDOM Tel: +44 179 247 3258 Email: electroharmonixuk@virginmedia.com This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased. To hear demos on all EHX pedals visit us on the web at www.ehx.com Email us at info@ehx.com 2
