ULTIMEA Apollo P40 Full HD Projector

Welcome to the ULTIMEA Apollo P40 Full HD Projector. This guide provides essential information to help you set up and start using your new projector quickly. For detailed safety instructions and the full user manual, please visit support.ultimea.com.

Important Note: Due to HDCP protocol, certain streaming services like Netflix and Amazon Prime may not be playable wirelessly. For these services, consider using external devices such as a Fire TV stick, Roku stick, or Chromecast connected to the projector.

What's Included

• Apollo P40 Projector
• Remote Control (Batteries not included)
• AV Cable
• HD Cable
• Power Cable
• Quick Guide

Product Features

The projector features a Lens, Auto Focus, Power Interface, and various ports including AUX, AV, HD, USB1, and USB2.

Remote Control Functions

Navigate projector functions using the remote control, which includes Power, Source, Arrow Keys/OK, Back, Home, Menu, Mute, Volume (VOL+/VOL-), and Focus (F+/F-) buttons.

Quick Setup

Power On/Off

Connect the AC power cord and press the power button on the projector's operation panel or the remote control to start or stop the projector.

Projector Installation

The projector can be installed in several ways: front projection (ceiling or table mount) or rear projection (ceiling or table mount). The projection screen size can range from 35" to 150", with a recommended range of 50" to 100". For optimal clarity, use the projector in a darkened environment.

Adjusting the Image

Ensure the projected image is correctly aligned by checking and adjusting horizontal and vertical settings on the screen.

WiFi Settings

To connect to a wireless network: Navigate to Settings on the projector, select WiFi, choose your network from the list, and enter the password to connect.

Screen Mirroring

For iOS Devices

On the projector's homepage, select AirPlay. On your iOS device, open the Control Center, tap Screen Mirroring, and select the U0320 device from the available options.

For Android Devices

On the projector's homepage, select Miracast. On your Android device, go to Settings, find 'Device Connectivity', tap 'Wireless Display', search for the U0320 projector, and select it. Ensure both devices are connected to the same network.

Wired Connections

HD Channel

Use an HD cable to connect devices like computers, game consoles, or set-top boxes that support HD output. Note: Android devices may not support playback via HD cable connection due to Type-C protocols.

AV Channel

Connect devices such as DVD players or set-top boxes that support AV output using an AV cable.

Fire TV Stick Connection

To connect a Fire TV Stick: Power the stick using its USB cable, plug it into the projector's HD port, and select the HD input option in the projector's settings. You can then use the Fire TV stick's remote to select and stream content.

Multimedia Playback

Insert a USB drive into the projector. Select the desired file type (movie, music, pictures, office) and enter the corresponding playback menu to access your content.

Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. The device meets general RF exposure requirements and complies with FCC radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20cm between the radiator and your body during operation. Any changes or modifications not explicitly approved by the manufacturer could void your authority to operate this equipment. Similar compliance statements are provided for Industry Canada (IC) regulations in both English and French.