Redragon Veigar K643WGC-RGB-PRO 94-Key Mechanical Gaming Keyboard

Product Overview

Thank you for choosing Redragon products. This manual provides operating instructions and warranty information.

Warranty Rules:

• Repair is guaranteed for failure due to electrical circuit problems within 18 months of purchase.
• Damages from disassembly, impacts, submersion, improper voltage, or natural disasters are not covered.
• Consumable parts and spare parts replacement are not included.

Connectivity and Setup

OS Support

WinXP/Vista/Win7/Win8/Win10/Win11/Mac OS

How to connect the keyboard with multiple devices

Wired Connection

1. Slide the ON/OFF switch to OFF.
2. Connect the keyboard to your computer using the provided USB A to USB Type C cable.
3. The computer will recognize and configure the keyboard automatically.
4. The LED indicator (M) will turn red while charging and white when fully charged.

2.4G Wireless Connection

1. Slide the ON/OFF switch to ON.
2. Press and hold [FN]+[4] for about 3 seconds. The LED marked with "M" flashes green.
3. Plug the USB receiver into an available USB port on your computer within 20 seconds.
4. The computer will recognize and configure the keyboard automatically.
5. The indicator flashes red when the battery is low. Recharge the keyboard via the Type-C cable. The LED marked with "M" will be red while charging and green when charging is complete.

Bluetooth Connection

1. Slide the ON/OFF/BT switch to ON.
2. Press [FN]+[1] (or [2]/[3] for other devices). The LED marked with "M" flashes blue (or cyan/magenta).
3. Turn on Bluetooth on your computer or smartphone and scan for available devices. Select "3.0 Keyboard" or "5.0 Keyboard" to connect.
4. The indicator flashes red when the battery is low. Recharge the keyboard. The LED marked with "M" will be red while charging and cyan/magenta when charging is complete.

Function Introduction

The keyboard can be used without software or driver installation.

• Backlight Effects: 20 backlight effects available.
• Key Combinations with [FN] key:
  • [FN]+[N]: Change backlight mode.
  • [FN]+[M]: Change backlight color.
  • [FN] + [+]: Slow down backlight speed.
  • [FN] + [→]: Speed up backlight.
  • [FN] + [Win]: Disable or enable the [Win] key.
  • [FN] + [1]/[2]/[3]: Select Bluetooth device.
  • [FN] + [4]: Change to 2.4G wireless connection. Press and hold for 3 seconds to pair.
  • [FN] + [ESC]: Reset keyboard to default settings.
  • [FN]+[PrtSC]: Turn backlight ON/OFF.
  • [FN]+O: ScrLK
  • [FN]+P: Pause
  • [FN]+[[{]: INSERT
  • [FN]+[]}]: DELETE
  • [FN]+[;:] : HOME
  • [FN]+['"]: END
  • [FN]+[.>]: PAGE UP
  • [FN]+[/?]: PAGE DN

Multi-Media Function

• FN+F1: My Computer
• FN+F2: Open Browser
• FN+F3: Calculator
• FN+F4: Media Player
• FN+F5: Previous Track
• FN+F6: Next Track
• FN+F7: Play/Pause
• FN+F8: Stop
• FN+F9: Mute
• FN+F10: Volume Down
• FN+F11: Volume Up
• FN+F12: My Email

How to Recharge the Keyboard

Use the provided USB A to USB Type C cable to connect the keyboard to a computer for charging. The LED indicator (M) will turn red during charging.

FAQ

1. Keyboard not responding: Ensure the USB cable is securely inserted into the computer's USB port, or try a different USB port.
2. Liquid spill: Immediately unplug the keyboard's USB cable. Wipe off excess liquid and place the keyboard in a dry, ventilated area to dry naturally before next use.

Battery Safety Guidelines

• Do not replace the battery with a different model.
• Do not use if the battery shows signs of damage (tearing, deformation, leakage, odor).
• Avoid contact with leaking battery material. Seek medical attention if contact occurs.
• Do not expose the battery to liquid, heat, electricity (outside the product), or non-standard conditions.
• Do not remove the battery except for proper disposal and recycling according to local laws.
• Do not impact, bend, alter, or disassemble the battery.

CAUTION: Failure to follow safety guidelines may result in product damage, explosion, fire, and/or electric shock.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.