Milwaukee M12 JSSP2 Bluetooth Jobsite Speaker

Important Safety Instructions

WARNING: READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS. Failure to heed all warnings listed below may result in electric shock, fire and/or serious personal injury. KEEP THESE INSTRUCTIONS.

• Read and keep these instructions.
• Heed all warnings.
• Do not use this appliance near water. Never immerse the apparatus in liquid or allow a liquid to flow inside. Water entering the apparatus increases the risk of electric shock.
• Clean only with a dry cloth. Certain cleaning agents and solvents are harmful to plastics and other insulated parts. Avoid gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia, and household detergents containing ammonia. Clean dust and debris from vents. Keep the apparatus handle clean, dry, and free of oil or grease.
• Do not block any ventilation openings. Install according to manufacturer's instructions.
• Do not use near heat sources like radiators, heat registers, stoves, or other appliances that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged (e.g., power-supply cord, liquid spilled, objects fallen into apparatus, exposed to rain or moisture, or does not operate normally). Service by unqualified personnel may result in injury.
• Battery-operated apparatus with integral or separate battery packs must be recharged only with the specified charger. Using a charger suitable for one battery type with another may create a fire risk.
• Use only with specifically designated battery packs. Use of other batteries may create a fire risk.
• When the battery pack is not in use, keep it away from other metal objects (paper clips, coins, keys, nails, screws) that can connect terminals. Shorting battery terminals can cause sparks, burns, or fire.
• Never disassemble the speaker.
• Do not expose this appliance to dripping and splashing liquids, or place objects filled with liquids on this unit.

Specific Safety Rules

• Always use common sense and be cautious. If you do not understand these instructions or feel the work is beyond your capability, contact Milwaukee Tool or a trained professional.
• Maintain labels and nameplates. Contact a Milwaukee service facility for replacements if unreadable or missing.
• READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE.

Additional Battery Safety Rules

WARNING: To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack, or charger in fluid or allow fluid to flow inside them. Corrosive or conductive fluids (seawater, industrial chemicals, bleach) can cause a short circuit.

WARNING: Do not charge non-rechargeable batteries.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting a battery can result in explosion or leakage of flammable liquid or gas.
• Leaving a battery in extremely high temperatures or extremely low air pressure environments can result in explosion or leakage of flammable liquid or gas.

Symbology

• V: Volts
• [Read Operator's Manual]: Read operator's manual
• [Important Operating Instructions]: Presence of important operating instructions
• USB-C: USB-C port
• [Indoor Use Only]: Indoor use only
• Regulatory Compliance Mark (RCM): This product meets applicable regulatory requirements.
• [Recycling Symbol]: Do not dispose of electric tools with household waste. Electric tools and electronic equipment must be collected separately and returned to an environmentally compatible recycling facility.

Specifications

Functional Description

The speaker has the following components:

• 1. Power button: Turns the speaker on/off.
• 2. Battery fuel gauge: Indicates remaining battery charge.
• 3. Battery bay: (not shown) Houses the battery pack.
• 4. Boot: (not shown) Protective base.
• 5. PACKOUT™ cleat: For mounting with PACKOUT™ system.
• 6. USB-C port: For charging external devices.
• 7. Control panel: Contains buttons for operation.
• 8. Light bar: Indicates speaker status (e.g., power, pairing).
• 9. Pause/Play button: Controls playback.
• 10. Volume up button: Increases volume.
• 11. Volume down button: Decreases volume.
• 12. Bluetooth® button: Manages Bluetooth® connections.
• 13. Bluetooth® LED: Indicates Bluetooth® connection status.
• 14. Audio link button: Activates/deactivates audio link feature.
• 15. Audio link LED: Indicates audio link status.

Operation

WARNING: To reduce the risk of fire or electric shock, do not expose this speaker to rain or moisture.

Turning On/Off and Pairing to Bluetooth®

1. Insert the battery.
2. Press the power button [▶️]. A tone will sound and the light bar will pulse, indicating the speaker has powered on.
3. The speaker will begin making a radar tone as it automatically searches for a Bluetooth® device. To pair a device, select "Milwaukee M12 Jobsite Speaker" on the Bluetooth® capable device.
4. Once paired, the speaker will beep and the light bar will turn solid. The speaker will automatically reconnect to the last-paired device if it is in range when turned on.
5. Once paired, use the controls on the Bluetooth® capable device or the speaker to move through tracks and control volume.
6. To pair the speaker to a new device, hold down the Bluetooth® button [?] for a few seconds. The speaker will make a radar tone and the light bar will pulse. Follow steps 3 and 4 with the new device.
7. To turn the speaker off, press the power button [▶️]. The speaker will automatically turn off after 30 minutes of inactivity.

Next/Previous Track

• To move to the next track, double-press the play/pause button [▶️⏸️].
• To move to the previous track, triple-press the play/pause button [▶️⏸️] twice.

Volume

Press or hold the volume down [➖] and volume up [➕] buttons to decrease or increase the volume. The light bar will fill to show the increase/decrease. A tone will play and the light bar will flash when maximum or minimum volume is reached.

Audio Link

Audio link allows connecting multiple M12 JSSP2 speakers or other Milwaukee audio link compatible speakers to be controlled by the same Bluetooth® capable device.

To activate audio link:

1. Turn the first speaker on and connect to a Bluetooth® capable device.
2. Press the audio link button [?] on the first speaker. A tone will play and the light bar will flash once before turning solid.
3. Turn on the second speaker.
4. Press the audio link button [?] on the second speaker. A tone will play. The second speaker's light bar will show the volume of the first speaker once connected.
5. Repeat step 4 for each additional speaker.
6. To disconnect an individual speaker, press the audio link button [?] or turn the speaker off.
7. To end audio link for all speakers, press the audio link button [?] on the first speaker or turn the first speaker off.

EQ Adjustment

1. To adjust bass level, hold down the play/pause button [▶️⏸️]. A bass tone indicates bass adjustment mode. This mode exits after a few seconds of inactivity; make adjustments quickly.
2. Press the volume down [➖] / volume up [➕] buttons to adjust bass level. The light bar shows the increase/decrease.
3. To adjust treble level, press the play/pause button [▶️⏸️] again while in bass adjustment mode.
4. Press the volume down [➖] / volume up [➕] or previous/next track buttons to adjust treble level. The light bar fills to show the increase/decrease.
5. To exit EQ adjustment mode, press the play/pause button [▶️⏸️] or wait a few seconds after adjusting bass or treble. The light bar will revert to a solid light.

Mounting Options

The speaker can be mounted in several ways:

• Using the nail hook on the back of the speaker to hang it from a nail.
• Using the D-hook in the speaker's PACKOUT™ cleat to hang it from a rope or wire.
• Using the speaker's PACKOUT™ cleat to mount it on a PACKOUT™ tool box or Twist-To-Lock (Cat. No 48228399X).

WARNING: Do not mount on or in a vehicle or trailer. Doing so can result in injury or property damage.

Low Battery Indicator

When the speaker's battery is low, a low battery tone will play every 60 seconds until the battery runs out of power and the speaker powers off.

USB Port

When the speaker is powered on, this USB port can be used to charge a cell phone, MP3 player, or any other device that uses less than 3 A of DC electrical current. NOTE: Any device using more than 3 A will trip a self-resetting overload and disable the output.

Fuel Gauge

To determine the amount of charge left in the battery, turn the tool on. The fuel gauge will light up. When less than 10% of charge is left, 1 light on the fuel gauge will flash 4 times. To signal the end of charge, 1 light on the fuel gauge will flash 8 times and the tool will not run. Charge the battery pack.

Factory Reset

To reset the speaker to factory settings:

1. Set the speaker to pairing mode by holding down the Bluetooth® button [?] until the speaker makes a radar tone and the light bar begins to pulse. Press the Bluetooth® button [?] again and the light bar begins to pulse. Do not connect the speaker to a device.
2. Hold down the Bluetooth® [?], audio link [?], and play/pause [▶️⏸️] buttons for 5 seconds. The speaker will reset to factory settings.

Maintenance

WARNING: To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the battery pack, charger, or tool, except as provided in these instructions. Contact a Milwaukee® service facility for all other repairs.

Maintaining Tool

Adopt a regular maintenance program. Inspect the tool for undue noise, misalignment, binding of parts, or other conditions affecting operation. Return the tool, battery pack, and charger to a Milwaukee® service facility for repair. After six months to one year, depending on use, return for inspection.

If the tool does not start or operate at full power with a fully charged battery pack, clean the battery pack contacts. If the tool still does not work properly, return it to a Milwaukee® service facility for repairs.

WARNING: To reduce the risk of personal injury and damage, never immerse your tool, battery pack, or charger in liquid or allow liquid to flow inside them.

Cleaning

Clean dust and debris from vents. Keep handles clean, dry, and free of oil or grease. Use only mild soap and a damp cloth. Never use flammable or combustible solvents.

Repairs

For repairs, return the tool, battery pack, and charger to the nearest service center.

Accessories

WARNING: Use only recommended accessories. Others may be hazardous.

For a complete listing of accessories, go online to milwaukeetool.com.au / milwaukeetool.co.nz or contact a distributor.

Warranty - Australia and New Zealand

Please refer to Australian and New Zealand warranty supplied with the tool. This warranty applies only to product sold by authorized dealers in Australia and New Zealand.

Service - Australia and New Zealand

Milwaukee® prides itself in producing a premium quality product that is Nothing But Heavy Duty™™. Your satisfaction with our products is very important! If you encounter any problems with the operation of this tool, please contact your authorized Milwaukee® dealer.

For a list of Milwaukee® dealers, guarantee, or service agents, please contact Milwaukee® Customer Service or visit our website.

• Australia Toll Free Telephone Number: 1300 645 928
• New Zealand Toll Free Telephone Number: 0800 645 928

Or visit: milwaukeetool.com.au / milwaukeetool.co.nz.