Baseus Creator Wireless Mouse

Overview

Before using the product, thoroughly read this manual. Keep the manual for future reference.

Product Description

• Left button
• Right button
• Scroll wheel
• DPI button: Press to change the mouse sensitivity (DPI). Default factory setting is 1600 DPI.
• ON/OFF button
• Indicator light
• USB receiver

Connection Steps

Battery Installation

Open the cap and install the batteries inside (make sure the polarities are connected properly), and close the cap.

2.4G Mode Connection

1. Turn on the mouse and take out the USB receiver from the back.
2. Connect the receiver to the device. Switch to the 2.4G connection mode. Click and move the mouse until the cursor shows up on the screen.

Specifications

• Name: Baseus Creator Wireless Mouse
• Model No.: F01A
• Material: ABS
• Transfer Distance: 20m
• Connection Type: 2.4G mode
• Sensitivity: 800/1000/1600DPI
• Response Frequency: 250Hz
• Compatible Systems: Windows, HarmonyOS, Apple OS, Linux, Vista, etc.

*Data measured by Baseus laboratory. Actual use may vary slightly depending on specific circumstances.

Product Safety Information & Warnings

Before using this product, please read all Instructions and Warnings. Improper use may cause damage to the product or personal safety.

• Keep away from fire sources. The product contains a battery. Do not expose the product to high temperatures, strong sunlight, or strong magnetic fields.
• Recommended use temperature: 0-40℃ (32-140°F).
• Do not attempt to personally disassemble or modify the product. This may cause fire or damage the product.
• Do not immerse the product in water. Consumers will be liable for any malfunction or damage caused by water ingress.
• Consumers are liable for any physical and property damage due to any improper use of the product not mentioned herein.

Package Contents

• Wireless mouse × 1
• USB receiver × 1
• User manual × 1
• Warranty card × 1

Related Icons, Standards, and Vendor Information

Icons:

• ⚠️: Warning - Follow safety instructions to avoid fire, electric shock, damage, or other injuries.
• UKCE♻️♺

Manufacturer: Shenzhen Baseus Technology Co., Ltd.

Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen.

Executive Standard: GB4943.1-2011

Tel: 4000-712-711

Website: www.baseus.com

CMIIT ID: XXXXXXXXX

FCC Requirement:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.