SenseFace 4 Series

SenseFace-4-Series Datasheet 202404

Index of /wp-content/uploads/download-manager-files/

PDF preview unavailable. Download the PDF instead.

SenseFace-4-Series Datasheet 202404
SenseFace 4 Series
SIP-Ready Multi-Biometric Access Control Terminal with Video Intercom Capability

Facial

RFID

Authentication

Fingerprint

IP65 dust & Video Intercom

waterproof rating

(SIP)

Bio CVAccess

Zlink

Zlink

SenseFace 4A

SenseFace 4B

Introduction
SenseFace 4 Series adopts the latest intelligent engineering facial authentication and in-glass fingerprint technology. It supports fingerprint, facial, card authentication with large capacity and speedy authentication, adopts ultimate antispoofing algorithm for facial authentication against almost all types of fake photos and videos attack, which offering secure biometric authentication.
SenseFace 4 Series is an access control terminal featuring a video intercom function and supports ONVIF protocol. It fully improves the video intercom experience and can be compatible with video intercom indoor unit with SIP protocol (Version 2.0).
Besides, SenseFace 4 Series supports multiple communication protocols. Its firmware has AC push and can convert to TA push and it is compatible with various AC or TA software. It can change to BEST protocol to link with ZKBio Zlink (AC module).
Features
· Visible Light Facial Authentication Technology and In-glass Fingerprint Authentication · Attained IP65 Protection Rating With Dustproof and Waterproof · Multiple Authentication Methods: Facial / Fingerprint / RFID / Password · Available RFID Modules:125 kHz ID Card / 13.56 MHz IC Card · HD Video Door Phone Via SIP Protocol (Version 2.0). Compatible With ZKTeco SIP Video Intercom Indoor Monitor
(VT07-B01and VT07-B01-W) · User Data Synchronization: User data can be downloaded/uploaded from one device to another via a USB drive · Compatible with wireless doorbell (optional) · Advanced access control functions (Wiegand input or output shared; RS485 communication; Electric Lock; Door
Sensor; Exit Button)
* Download data using the USB driver and make sure to use the FAT32 format.

Specifications

Model Display Camera Operation System
Hardware
Authentication method Fingerprint Template Capacity
Face Template Capacity Card Capacity User Capacity
Transaction Capacity Max. User Password Length Biometric Authentication Speed Touchless Biometric Authentication
Distance False Acceptance Rate (FAR) %
False Rejection Rate (FRR) %
Biometric Algorithm
Card Type
Communication
Standard Functions
Optional Functions Access Control Interface
Power Supply Operating Temperature
Operating Humidity Dimensions Net Weight
Supported Software Installation
Ingress Protection Rating Certifications

SenseFace 4A

SenseFace 4B

4.3"@ TFT Color Touch LED Screen (272*480)

WDR Binocular Camera @ 1MP

Linux

CPU: Dual Core@1GHz RAM: 512MB; ROM: 8GB
Speaker: 8ohm @1W Microphone: *1 (Sensitivity: -42 dB/ Omni-directional/ Signal-to-Noise Ratio: 58 dB/
Impedance: 2.2k) Supplement Light: No

Fingerprint Sensor: In-Glass Fingerprint (Z-ID)

/

Fingerprint / Face / Card / Password (Virtual Keypad)

Face / Card / Password (Virtual Keypad)

8,000 (1:N) (Standard)

/

6,000 (1:N) (Standard)

8,000 (1:N) (Standard)

8,000 (1:N) (Standard)

200,000 (1:N)

8 Digits

less than 0.5 sec (Fingerprint) less than 0.35 sec (Facial Authentication)

less than 0.35 sec (Facial Authentication)

30cm to 200cm (Facial Authentication)

FAR  0.01% ( Visible Light Facial Authentication)
FAR  0.0001% ( Fingerprint )

FAR  0.01% ( Visible Light Facial Authentication)

FRR  0.02% ( Visible Light Facial Authentication)
FRR  0.01% ( Fingerprint )

FRR  0.02% ( Visible Light Facial Authentication)

ZKFace V4.0 ZKFingerprint V13.0 (Standard) / V10.0
(Optional)

ZKFace V4.0

ID Card@125 kHz (Standard) IC Card@13.56 MHz (Optional)

TCP/IP*1 Wi-Fi (IEEE802.11b/g/n/ax) @ 2.4 GHz (Optional)
Wiegand (Input or Output)*1 RS485: ZKTeco RS485*1
USB: Type A (USB Drive Only)*1 Aux Inputs *1, Electric Lock*1, Door Sensor*1, Exit Button*1, 12V Output*1

ADMS, DST, Photo Capture, Event Photo Capture, Up to 14-digit User ID, Access Levels, Groups, Holidays, Anti-Passback, Record Query, Schedule Bell, Tamper Switch Alarm, Automatic Status Switch, Multiple AuthenticationMethods, SIP Client (Version 2.0), ONVIF (Compatible with Profile S, Profile T, Profile G, Profile C, Profile Q & Profile A), AC Push and TA
Push Protocol Switch, HTTPs / SSH Backend Access, T9 Keyboard (Input)

IC Card, Wi-Fi, Wireless Doorbell

RS485 ( RS485 Card Reader / Biometric Reader)

DC 12V 3A

-5°C to 45°C

10% to 90% RH (Non-condensing)

175.00 mm * 84.50 mm * 21.65 mm (L*W*H)

0.264 Kg

Software: ZKBio CVAccess/ZKBioTime Mobile App.: ZKBio Zlink Cloud Service: ZKBio Zlink

Wall-mount (Compatible with Asia Gang Box / Single Gang Box)

IP65 (waterproof and dustproof )

ISO14001, ISO9001, CE, FCC, RoHS

Configuration
Zlink-Web Zlink App

Internet

Wired Network
Wireless Network
SenseFace 4A
BEST Protocol

No Touch
EXIT
Exit Button

Client Client

Internet 433

Bio CVAccess AES256/ TLS1.2 Encryption
Internet
Wiegand

ONVIF Relay Door Sensor

In Door Monitor (SIP Ready) SIP
RS485

Electric Lock

Smoke Detector

Wireless Doorbell (Optional)

Card reader

SenseFace 4A

PUSH Protocol

Dimensions (mm)

21.65

84.50

84.50

21.65

No Touch
EXIT
Exit Button RS485 Slave Reader

175.00 175.00

SenseFace 4A

SenseFace 4B

ZKTECO CO., LTD. www.zkteco.com E-mail: sales@zkteco.com

V1.0 04/16/2024 Copyright © 2024 ZKTECO CO., LTD. All rights reserved.


Adobe PDF Library 15.0 Adobe InDesign CC 14.0 (Windows)