ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

DCS-5010L Firmware Release Notes

Brand: D-Link

Firmware Version: V1.16.01

Published Date: 2019/6/17

Content Overview

Upgrading Instructions
New Features
Problems Fixed
Known Issues
Related Documentation

Revision History and System Requirement

Firmware Version	Date	Model	Hardware Version
V1.16.01	2019/6/19	DCS-5010L	A1
V1.15.12	2018/12/19	DCS-5010L	A1
V1.14.06	2016/7/29	DCS-5010L	A1
V1.13.05	2015/11/18	DCS-5010L	A1
V1.12.03	2015/9/9	DCS-5010L	A1
V1.11.08	2015/9/2	DCS-5010L	A1
V1.10.07	2015/7/27	DCS-5010L	A1
V1.06.01	2015/2/6	DCS-5010L	A1
V1.05_b8	2015/1/29	DCS-5010L	A1
V1.04_b17	2015/1/09	DCS-5010L	A1
V1.03_b8	2014/3/13	DCS-5010L	A1
V1.02_b5	2013/9/25	DCS-5010L	A1
V1.01_b2	2013/5/28	DCS-5010L	A1

Upgrading Instructions

Download the latest firmware file from the D-Link website. The file is in .bin file format.
Log-in camera web UI and enter setup/Maintenance/Firmware upgrade
Click Browse... and specify the firmware file.
Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

New Features

Firmware Version	New Features
V1.16.01	Update mydlink agent to v2.2.0-b63. Change the default system time to 2019-01-01
V1.15.12	Upgrade mydlink agent to 2.2.0-b32. Change the default system time to 2018-01-01 Update the ActiveX and Java Applet with renewed code-signing certificate. Update the macOS Plugin with renewed code-signing certificate. Support digest authentication for Web UI (Cannot support basic authentication for Web UI) Upgrade MatrixSSL to v3.9.3 that resolve the vulnerabilities in MatrixSSL.
V1.14.06	Upgrade mydlink agent to 2.1.0-b01. Change the HTTPs self-signed certificate to SHA2 algorithms. Support mydlink UID mechanism (mdb get dev_uid) Change the support page hyperlink of Firmware Upgrade web-UI to www.dlink.com. Updated OpenSSL to v1.0.1t. Updated mDNSResponder to 625.41.2. Change the default system time to 2016-01-01 Update the years in the copyright statement for IP Camera's web-UI to 2016. Add authentication to CGI /config/stream_info.cgi. Offer the password validation on console port. (Console's Password is synchronized with the admin's password)
V1.13.05	Update the mydlink agent to v2.0.20-b10. Upgrade OpenSSL library to 1.0.1f. Change Direct Mode behavior to allow concurrent connection
V1.12.03	Update mydlink agent to 2.0.19-b73 to fix the issue of unstable remote connection
V1.11.08	Update mydlink agent to 2.0.19-b52 Add the denoise mechanism to reduce the background noise Add the login check mechanism to solve Brute Force Attack issue Add Hardware Version item on the Status page of the camera's web-GUI. Remove the reboot function at reset button. (For the previous firmware, you can press and hold the reset button for less than 3 seconds to reboot the device)
V1.10.07	New mydlink agent 2.0.19-b36
V1.06.01	New mydlink agent 2.0.18-b66
V1.05_b8	New mydlink agent 2.0.18-b62 Remove SSL, change to support TLS.
V1.04_b17	Support DIRECT mode. Add support mydlink Home New mydlink agent v2.0.18-b30 Remove DDNS "DynDns (Free)" and "(Custom)". Clears Dlink15Register flag to 0 when factory reset
V1.03_b8	New mydlink agent 2.0.17-b40. Change the default FTP to passive mode Support Win8.1 + IE11 Change WPS led on 10 seconds after WPS succeed. Change LANDAP protocol's password length to 0 – 32 characters Support Java 7 Update 51 SSL Certificate will be automatically self signed (regenerated) during initial configuration/factory reset.
V1.02_b5	Update mydlink agent to v2.0.17-b28. Add user can configure interval setting for motion/sound detection of mail/ftp.
V1.01_b2	Update mydlink agent to v2.0.17-b06. Update h.264 Activex to v1.0.0.12. Only allow 0-9, a-z, A-Z, ".", "-", "_" as the user account name.

Problems Fixed

Firmware Version	Problems Fixed
V1.16.01	Fix an authenticated buffer overflow vulnerability issue.
V1.15.02	Add XSS protection mechanism for CGI command. Change the open source to GPLv2 terms. Fix home position issue. Fix the issue that Cross Site Request Forgery (CSRF) vulnerability for FTP setting. Fix the issue that denial of service (DoS) vulnerabilities for upload firmware and restore configuration. Remove crossdomain.xml to fix a security vulnerability issue.
V1.14.06	Fix a command injection issue in the change admin's password configuration (/setSystemAdmin). Fix the issue where sending long password on password field of html page. Fix the D-Track Case (HQ20171011000008) that get jpeg image issue on power on time. Fix the D-Track Case (HQ20180123000009) that audio and video stream are out of sync when view the camera's video feeds via ActiveX viewer in Internet Explorer browser. Fix motion sensitivity setting is 0%, the motion trigger error
V1.13.05	Fixed an issue where IP Camera blocks CGI requests from Chrome and Edge. Added CSRF protection
V1.11.08	Fixed the IE11 compatibility issue in Windows 10. Change WPS LED behavior blinking time on WPS error/timeout to 10 seconds. Remove the reboot function by pressing and holding the reset button in less than 3 seconds. Add the pop-up warning message when the user creates an existing user account on Device Web GUI. Support to auto-create FTP folder if the folder doesn't exist on FTP server.
V1.10.07	Fixed HTTPS issue that cause Pan/Tilt and Day/Night control not work from portal/app Fixes the issue in which IP Cam cannot create FTP folder with FTP server on
V1.06.01	Modify Time Zone Table list to support some existing time zones changes. Fixed when IP Cam connects to wireless router and its Direct Mode is also activated simultaneously, the wireless devices can discover other IP cameras (connect to wireless router) through the AP mode connection. Fixed IP Cam can connect to a Wireless Network with a Hidden SSID. Fixed audio overflow issue Fixed the camera will reduce the H.264/frame rate in half on low light environment Fixed CGI /reset.cgi reboot command not work issue Fixed issue where device would not respond properly to portal commands under relay mode.
V1.04_b17	Fixed e-mail interval issue on motion/sound detection mode. Fixed CGI stream_info.cgi issue. Fixed bad mjpeg frame issue. Fixed CGI notify_stream.cgi issue (disable motion/sound detection when move P/T). Fixed day light saving issue (cross year case). Fixed e-mail sometimes not send issue. Fixed DDNS issue (incorrect password case). Fixed NTP issue under PPPoE mode. Fixed ICR/IR issue on night when set as "Always Day Mode". Fixed FTP issue if FTP session is disconnected unexpectly.
V1.03_b8	Adjust sensor settings for sometimes video flash issue. Fixed sometimes incorrect ICR control. Fixed Lens move left/right/up/down incorrect from mydlink portal/app when mirror/flip is enabled Fixed sometimes bad frame issue. Fixed mydlink event (sound detection) timing issue.
V1.02_b5	Fixed schedule time of motion detection/sound detection incorrect issue when start time > end time. Fixed h.264 streaming issue tested on ios6. Fixed IP task will be restarted issue on DHCP renew time. Fixed OSD disappear issue. NTP source port change to port 123. Adjust sensor settings.
V1.01_b2	Fix the problem that mydlink Agent will run twice when the camera is connecting to DIR-850L using WPS Push button. Fixed OSD color issue Fixed the direction of P/T control panel incorrect issue when Flip/Mirror enabled

Known Issues

Firmware Version	Known Issues
1.15.12	Not support webUI access in Safari 12
1.04b17	If device is already registered to mydlink, the wizard then always showed timeout and couldn't finish setup, even though the setup succeeds.

Related Documentation

N/A

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 7 Pages, 166.11KB

✖

PDF DCS-5010L RELEASENOTES 1.16.01 Foxit Reader PDF Printer Version 7.1.0.112

Related Documents

	D-Link DCS-936L Firmware Release Notes V1.06.01 Official release notes for the D-Link DCS-936L network camera, detailing firmware version V1.06.01, including revision history, upgrade instructions, new features, problems fixed, and known issues.
	D-Link DGS-1510 Series Firmware Release Notes V1.81.004 Official release notes for D-Link DGS-1510 Series firmware version V1.81.004, detailing new features, command line changes, MIB updates, fixed problems, and known issues for D-Link network switches.
	D-Link Vigilance Outdoor Dome Camera Quick Installation Guide Get started with your D-Link Vigilance Outdoor Dome Camera (DCS-4614EK, DCS-4618EK) using this comprehensive Quick Installation Guide. Learn about hardware features, package contents, system requirements, setup wizard installation, camera configuration, mounting procedures, and waterproofing your installation. Visit dlink.com/support for more resources.
	D-Link F-Series AI Enabled Network Cameras User Manual Comprehensive user manual for D-Link F-Series AI Enabled Network Cameras, covering setup, configuration, intelligent analysis features, recording, and troubleshooting for optimal performance.
	D-Link DCS-6110 Fixed Dome Network Camera User Manual Comprehensive user manual for the D-Link DCS-6110 Fixed Dome Network Camera, covering installation, configuration, features, and troubleshooting for business and home surveillance.
	D-Link DGS-1250 A1 Series Firmware Release Notes and Upgrade Guide Official release notes for D-Link DGS-1250 A1 Series switches, detailing firmware versions, new features, bug fixes, and comprehensive upgrade instructions via CLI, Web-UI, and D-Link Network Assistant.
	D-Link DCS-4701E Vigilance HD Outdoor PoE Mini Bullet Camera Quick Installation Guide A quick installation guide for the D-Link DCS-4701E Vigilance HD Outdoor PoE Mini Bullet Camera, covering hardware overview, configuration, mounting, and waterproofing.
	D-Link DGS-1250 A1 Series Firmware Release Notes v2.03.004 - Updates & Instructions Official release notes for D-Link DGS-1250 A1 series network switches, detailing firmware version 2.03.004. Includes new features, bug fixes, known issues, and upgrade instructions for models like DGS-1250-28X and DGS-1250-52X.