TE SH-B SDS-Max Chipping Hammer Accessories

Instructions for Use

Step 1: Preparation and Identification

This step shows two different types of handles. The left handle has a lock symbol ? and an exclamation mark ❗, indicating it is a safety handle. The right handle also has a lock symbol ? and an exclamation mark ❗, suggesting it is also a safety handle. The diagram illustrates how to correctly attach the handle to the tool.

Step 2: Attaching the Accessory

This diagram shows the accessory (labeled '1') being fitted onto the tool shaft (labeled '2'). The accessory appears to be a type of adapter or collar that slides over the tool's chuck mechanism.

Step 3: Securing the Handle

This diagram illustrates the process of attaching and securing a handle to the chipping hammer. The handle is shown in position ('1') and then being rotated or clicked into place ('2'), indicated by a red arrow.

Step 4: Engaging the Lock

This diagram shows the handle being secured. The lock symbol ? is present, and the number '1' indicates the initial action, followed by '2' showing the final secured position, with a red arrow indicating the direction of engagement.

Step 5: Final Check and Operation

This diagram shows a final check of the handle attachment. An eye symbol ? indicates to look for proper alignment, and an exclamation mark ❗ suggests a critical point. The lock symbol ? confirms the handle is secured. A red arrow indicates the direction of final engagement or check.