Thermador PO301W 30-Inch Single Built-In Oven

Product Overview

Image of the Thermador PO301W 30-inch single built-in oven, featuring a sleek stainless steel exterior with gray glass. The oven door is closed, showing the handle and control panel. A second image shows the oven door open, revealing the interior cavity and racks.

To be fully ADA compliant, these units must be installed according to ADA guidelines. Please check current ADA requirements for guidance on installation.

Features & Benefits

• Specially crafted gray glass on stainless steel for a luxurious look and finish.
• Designed for flexibility: standard or flush installation into kitchen cabinets.
• [SoftClose®] door ensures ultra smooth closing of the oven door.
• 1 [Full Access®] telescopic rack.
• Fast 2-hour self-clean mode.
• Fast preheat (around 7 minutes).

General Properties

Oven Performance

Technical Details

Dimensions & Weight

Accessories (Included)

1 Telescopic and 2 Standard Oven Racks, Meat Probe, Broil Pan

Warranty

Limited Warranty Parts and Labor: 2 Year

Installation Details

Single Oven Bottom Hinge

Diagram illustrating the side view of the Thermador PO301W oven, showing dimensions related to the bottom hinge installation. Key measurements include overall height, depth, width, and distances from the bottom and sides.

Measurements are provided in inches (mm).

Door Handle Depth

Diagram showing the door handle protrusion from the oven door skin, with a measurement of 2 5/8 inches (67 mm).

*Protrusion of handle from door skin

Single Oven Wall Mount Installation

Diagram illustrating the wall mount installation for the Thermador PO301W oven. It shows the required cutout dimensions in the wall and the placement of the junction box, with specific measurements for height, width, and depth.

* For single ovens installed into a wall cabinet, the junction box may be located above, beneath, left or right of the unit within reach of the power cord.

** For oven installation in a wall cabinet, the control panel overlap is a min. 3/8" (10 mm) to max. 2" (51 mm).

Measurements are provided in inches (mm).

Dimensions for Under-Counter Installation

Diagram showing the dimensions for installing the Thermador PO301W oven under a counter. It details the required cabinet opening height, width, and depth, along with notes on junction box placement and control panel overlap.

* For single ovens installed under a cabinet, the junction box should be located to the right or left of the unit within reach of the power cord.

Measurements are provided in inches (mm).

Flush Install Top View & Side View

Diagrams illustrating the top and side views for a flush installation of the Thermador PO301W oven. These views detail the placement of reveal cleats and flush inset dimensions for both the top and side of the oven unit.

Measurements are provided in inches (mm).

Standard Installation: Single oven, double oven or combo oven over warming or storage drawer

Diagram showing standard installation configurations for a single, double, or combo oven installed above a warming or storage drawer. It includes dimensions for the oven cutout height and width, and notes on junction box placement relative to the power cable.

* Wall oven junction box may be located above or to the right or left of the unit within reach of the power cable.

** Electrical hook-up may be located below (depending on space) or next to the drawer within reach of the power cable.

Minimum 3/4" (18 mm) required between cut-outs.

Measurements are provided in inches (mm).

Flush Installation: Single oven over storage or warming drawer

Diagram showing flush installation for a single oven above a storage or warming drawer. It details the required cutout dimensions, cleat placement, and notes on base plate requirements and custom panel thickness.

*IMPORTANT: Base has to be able to support the weight of the oven. Please check oven manual for minimum weight requirements.

** For WD30W, the installed dimension may differ. This drawing based on a 3/4" (19 mm) thick custom panel.

Measurements are provided in inches (mm).

Standard Installation: 30" speed oven or microwave above a single oven

Diagram showing standard installation for a 30-inch speed oven or microwave installed above a single oven. It provides dimensions for the combined unit cutout height and width, and notes on junction box placement.

* Junction box may be located above or next to the unit within the reach of the power cable.

** Junction box may be located below (depending on space) or next to the unit within the reach of the power cable.

***Most combinations available as combo oven (one cut-out, one electrical hook-up).

Minimum dimension between cut-out: 1" (25 mm) for wall oven cut-out height of 285/8" (727 mm); 25/8" (67 mm) for wall oven cut-out height of 27" (686 mm).

Measurements are provided in inches (mm).

Flush Installation: Speed oven or microwave above a 30" single oven

Diagram showing flush installation for a 30-inch speed oven or microwave installed above a single oven. It details the required flush cutout dimensions, cleat placement, and notes on base plate requirements.

***Flush installation requires a base plate underneath the body: 30" products-Dimensions: H 5/16" (8 mm) x W 281/2" (724 mm) x D 221/2" (571 mm)

*IMPORTANT: Base has to be able to support the weight of the oven. Please check oven manual for minimum weight requirements.

**Most combinations available as combo oven (one cut-out, one electrical hook-up).

Measurements are provided in inches (mm).

Side-by-Side Installation - Top View (Standard & Flush)

Diagrams illustrating standard and flush side-by-side installation configurations for Thermador ovens. These diagrams show top views with dimensions for cabinet openings, reveal cleats, and cut-out widths, along with important notes on minimum distances and accessory kits.

IMPORTANT: When installing an oven in combination, a minimum distance between the ovens is required. Refer to the oven installation manual for all other measurements.

NOTE: Conventional ovens with a serial number beginning with "FD009" require accessory kit TWO30YS for Standard or Flush side-by-side installation with another oven or in combination with any other approved product. This kit must be purchased separately and installed prior to installing the oven in the cabinetry. Refer to the Oven Installation Guide for additional information.

Measurements are provided in inches (mm).

Thermador Side-by-Side Built-In Oven Combination Guide

The following OVENS are approved to be installed side-by-side in combination and the installation has been certified by CSA. This guide is only effective with the use of the Thermador built-in oven side-by-side accessory kit TWO30YS. The built-in oven side-by-side accessory kit is required for approved installation.

The following OVENS and DRAWERS are approved by BSH Home Appliances Corporation to be installed in combination. These products, identified in the table below, may be installed in combination with other cooking units. The suitability of the combination has not been evaluated by CSA.

Built-In Ovens (Conventional Ovens)

*Conventional ovens with a serial number beginning with "FD009" require accessory kit TWO30YS for side-by-side installation with another oven or in combination with any other approved product. All parts in the kit may not be required. Refer to the Oven Installation Guide for additional information.

Warranty & Disclaimer

These warranties give you specific legal rights and you may have other rights that vary from state to state. Limited warranty from date of delivery. For complete warranty details, refer to your Use & Care manual, or ask your dealer.

Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.