Bowers & Wilkins CI 300 Series
Custom Installation Loudspeakers
Available at Digital Cinema
Affordable, high-quality audio everywhere.
Speakers from Bowers & Wilkins have always been recognised as delivering the best audio experience at any level. Techniques and materials honed to perfection in our core models have been successfully carried over to our custom products, so that those who want to hear everything whilst seeing nothing have had a clear solution. That is unless the environment is one of high humidity, such as a shower room or indoor swimming pool, which are unsuited to some of the advanced materials we have employed.
All change! The three models in the new CI 300 Series have been specifically designed to cope with these more demanding environments, so whereas their cost effectiveness may lead them to being described as entry level, they also provide a point of entry to areas of the home that were previously off-limits for high-quality installation loudspeakers.
CWM362
The CWM362 is a two-way in-wall loudspeaker. Like the in-ceiling models in the series, it features an elegant minimal-width border design.
Textual description of the CWM362 in-wall speaker diagram: The diagram shows a single in-wall speaker unit with a circular grille. Internal components include a 160mm (6in) Polypropylene cone bass/midrange driver and a 25mm (1in) soft dome tweeter. External dimensions are 221mm (8.7in) width by 315mm (12.4in) height. Required cut-out dimensions are 181mm (7.2in) width by 275mm (10.9in) height, with a minimum depth of 76mm (3in).
| Description | Details |
|---|---|
| Drive Units | 2-way in-wall system 1x 160mm (6in) Polypropylene cone bass/midrange 1x 25mm (1in) soft dome tweeter |
| Frequency Range (-6dB) | 50Hz - 30kHz |
| Sensitivity SPL (2.83V, 1m) | 89dB |
| Impedance Nominal (min) | 8Ω (5.0Ω) |
| Power Handling | 80W |
| Pre-mount Kit | PMK W6 |
| Back Box | BB 6W |
CCM362
The coaxial CCM362 offers a choice of size dependent on the output level required. It is balanced for wide-angle listening, commensurate with its in-ceiling placement, and offers a choice of round or square aspect.
Textual description of the CCM362 in-ceiling speaker diagram: The diagram shows an in-ceiling speaker unit, with visual representations of both round and square grille options. Internal components include a 160mm (6in) Polypropylene cone bass/midrange driver and a 25mm (1in) soft dome tweeter. For the round version, the grille diameter is 200mm (7.9in) and the overall diameter is 240mm (9.5in), with a depth of 85mm (3.4in).
| Description | Details |
|---|---|
| Drive Units | 2-way in-ceiling system 1x 160mm (6in) Polypropylene cone bass/midrange 1x 25mm (1in) soft dome tweeter |
| Frequency Range (-6dB) | 50Hz - 30kHz |
| Sensitivity SPL (2.83V, 1m) | 89dB |
| Impedance Nominal (min) | 8Ω (5.0Ω) |
| Power Handling | 80W |
| Pre-mount Kit | PMK C6 |
| Back Box | BB 6C |
CCM382
The coaxial CCM382 offers a choice of size dependent on the output level required. It is balanced for wide-angle listening, commensurate with its in-ceiling placement, and offers a choice of round or square aspect.
Textual description of the CCM382 in-ceiling speaker diagram: The diagram shows an in-ceiling speaker unit, with visual representations of both round and square grille options. Internal components include a 200mm (8in) Polypropylene cone bass/midrange driver and a 25mm (1in) soft dome tweeter. For the round version, the grille diameter is 249mm (9.8in) and the overall diameter is 290mm (11.4in), with a depth of 85mm (3.4in).
| Description | Details |
|---|---|
| Drive Units | 2-way in-ceiling system 1x 200mm (8in) Polypropylene cone bass/midrange 1x 25mm (1in) soft dome tweeter |
| Frequency Range (-6dB) | 45Hz - 30kHz |
| Sensitivity SPL (2.83V, 1m) | 90dB |
| Impedance Nominal (min) | 8Ω (5.0Ω) |
| Power Handling | 80W |
| Pre-mount Kit | PMK C8 |
| Back Box | BB 6C |
