Lomota Smart Garage Door Opener

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Please plug in the socket in proper condition and away from children.
• Do not attempt to disassemble, repair, or modify the device.
• For indoor use only.
• This product should not be exposed to direct sunlight.
• When you leave the product unused for a long time, unplug the product from the power outlet.
• Please contact seller for replacement if there is any damage caused by transportation.

Package Contents

The package includes:

• 1 x Signal Control Cable
• 1 x USB Adapter
• 4 x Screws
• 1 x Smart Garage Door Opener
• 1 x Door Sensor with Cable
• 1 x Test Wire
• 1 x Double-sided Adhesive Tapes

If any part is missing, please contact support@lomota.net.

Installation Guide

1. Lomota smart garage door opener is a companion device for your existing garage door opener. Its working principle involves connecting the device to the opener's power and signal terminals.

   Diagram Description: An illustration shows the smart garage door opener device connected to the opener power head, a wall-mounted sensor, and a power source.

2. Download the eWiseHome app and select "Smart Garage Door Opener" to begin.

   Visual Description: Icons for downloading the app from the Apple App Store and Google Play Store are displayed.

3. Power on the device. Open the eWiseHome app and follow the setup wizard for configuration.

4. Connect the device to your home WiFi using the eWiseHome app.

   Visual Description: App screenshots illustrate the device reset process (power on, check LED, hold power button for 5 seconds) and a confirmation step for the LED blinking rapidly. A note indicates pairing should be completed within 5 minutes. Lomota smart garage door openers support 2.4GHz networks only.

5. Connect the sensor cable. Move the sensor to check if it is functional, observing the "OPEN" and "CLOSE" states.

   Visual Description: Icons depict the sensor indicating the garage door is OPEN and CLOSE.

   If the sensor is not functional, contact support@lomota.net.

6. Mount the sensors on the garage door. Ensure the distance between the two sensors is less than 1 inch when the garage door is closed, and they are well separated when the door is open.

   Diagram Description: An illustration shows the correct sensor placement on the garage door and wall, highlighting the "less than 1 inch apart" requirement.

   You can use the included double-sided adhesive tapes or screws for mounting.

7. Power off your existing garage door opener. Connect the signal control cable to the two terminals that connect to the wall button. Wire order does not matter.

   Diagram Description: An illustration shows the wall button terminals on the opener power head, labeled with '+' symbols and indicating connection points for 'Common' and 'Radio or Push Button or Alternative or OP/CS or O/S/C'.

8. Deploy the device, recommended on top of your existing garage door opener, using the provided double-sided adhesive tapes if necessary.

   Diagram Description: An illustration shows the device placed on top of the garage door opener, connected to the power cord.

9. Power on both the existing garage door opener and the smart garage door opener. The smart device will automatically reconnect to the Lomota cloud service. Installation is now complete.

LED and Button Rules

Reset Button: Hold for 5 seconds to enter Wi-Fi configuration mode or switch pairing mode.

Status LED:

• Flashing green rapidly (twice/sec): Smart mode for Wi-Fi connecting.
• Flashing green slowly (once/3 sec): AP mode for Wi-Fi connecting.
• Flashing green once: Open or close action is triggered by App, button, or third-party control.
• Off: Successfully connected / Powered OFF / No Wi-Fi connecting for 3 minutes.

Diagram Description: An illustration of the device highlights the LED indicator and the reset button.

How to Use

1. Operation Page

The eWiseHome app's operation page allows control of the garage door:

• Power button: Click to open or close the door.
• Alarm: Set notification, opening time, and PIN code.
• Countdown: Set a countdown timer to close the door.
• Record: Check operation history.
• Timer: Set a schedule for automatic opening or closing.

Diagram Description: A screenshot of the app's operation page is shown.

2. Voice Control

Amazon Alexa Voice Control:

1. Add the smart device in the eWiseHome app.
2. Rename the device in eWiseHome app for easy recognition by Alexa (e.g., "Garage door").
3. Launch the Alexa app, sign in, and ensure you have an Alexa-enabled device (e.g., Echo).
4. Navigate to "Skill & Games" in the Alexa app menu.
5. Search for "eWiseHome" and tap "Enable".
6. Enter your eWiseHome app account and password to link accounts.

Common Alexa commands:

• "Alexa, open garage door."
• "Alexa, close garage door."
• "Alexa, is garage door closed?"

Visual Description: "Works with Amazon Alexa" logo is displayed.

Google Assistant Voice Control:

1. Add the smart device in the eWiseHome app.
2. Rename the device in eWiseHome app for easy recognition by Google Home (e.g., "Garage door").
3. Launch the Google Home app, sign in, and ensure Google Home device setup is complete.
4. On the Google Home app's main page, tap the sidebar menu, select "Home Control".
5. Tap the plus sign, search for "eWiseHome".
6. Select your country, enter eWiseHome app account and password to link accounts.

Common Google Assistant commands:

• "Hey Google, open garage door."
• "Hey Google, close garage door."
• "Hey Google, is garage door closed?"

Visual Description: "Works with Google Home" logo is displayed.

FAQ

For any questions about the Smart Garage Door Opener, please contact support@lomota.net.

1. Can I manage multiple smart garage door openers within eWiseHome app?

   One smart garage door opener is for one garage door only. You can configure multiple smart garage door openers within the app.

2. What shall I do when my eWiseHome app is unable to control the added smart garage door opener?

   Please check the following:

   • Verify the main WiFi's internet connection.
   • Ensure the main WiFi password has not changed.
   • Factory reset the device and try configuring its WiFi again.

Warranty

Lomota products are covered by a 12-month limited warranty from the original purchase date. For any issues, contact support@lomota.net.

Aftersales service is provided only for products sold by Lomota or its authorized retailers and distributors.

Compliance Information

FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If interference occurs, users are encouraged to correct it by one or more of the following measures: reorient or relocate the receiving antenna, increase separation between equipment and receiver, connect to a different circuit, or consult a dealer/technician.

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Visual Description: FCC logo is displayed.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French Translation: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device meets exemption from routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

French Translation: Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

French Translation: Cet émetteur ne doit pas être co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

Visual Description: CE, CM, ETL LISTED, and Intertek 5014397 logos are displayed, indicating compliance and certification.

Disclaimer

1. The function of this smart device is tested under typical circumstances described in specifications. Lomota does NOT guarantee exact performance as described under all circumstances.
2. By using third-party services (Amazon Alexa, Google Assistant, Apple Homekit, SmartThings), customers acknowledge that Lomota is not liable for data and private information collected by these parties. Lomota's liability is limited by its Privacy Policy.
3. Damages from ignoring SAFETY INFORMATION are not covered by Lomota aftersales service, nor does Lomota assume legal responsibility.

Customers acknowledge understanding by reading this manual.