User Guide for BARATZA models including: Vario W Plus, Coffee Grinder

Vario W - Baratza

This is just a quick start guide. If you would like more detailed instructions, please skip ahead to the full manual, found online at.

Thank you for choosing the

This is just a quick start guide. If you would like more detailed instructions, please skip ahead to the full manual, found online at baratza.com/documentation/. SETUP: 1...

Vario W

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 2 Pages, 217.50KB

®
QUICK START GUIDE
Vario W+

Thank you for choosing the Baratza Vario W+ for your home grinding needs!
This is just a quick start guide. If you would like more detailed instructions, please skip ahead to the full manual, found online at baratza.com/documentation/

SETUP:

4

1. Remove everything from the packaging and hand wash the lid (1),

5

hopper (2) and grounds bin (10) with warm soapy water. Let air dry.
7
2. Position the shut-off knob (3) near the rear left of the grinder, apply

downward force, and feel for the hopper to insert into place. Once

9

inserted, firmly rotate the hopper clockwise to center the shut-off

knob and lock the hopper into place.

3. Plug in the grinder.

10

4. Insert the grounds bin, it will rest on the weight sensor.

5. Press the tare button (8) to zero the scale.

6. Reference the Grind Settings Chart below and set the grind size.

7. When adjusting finer, the grinder must be running or completely
empty of beans to prevent the adjustment system from binding on beans that are between the burrs.

8. Add beans to the hopper.

9. Select a grind weight preset (9) then press start (7) to grind.

10. Presets 1, 2 and 3 set the grinder to run to a designated weight and
can be adjusted with the up/down arrows (4) and saved to a preset by pressing and holding that preset button.

5
PARTS IDENTIFICATION

1. Hopper lid

7. Start/Stop button

7

2. Bean hopper

8. Tare button

3. Bean shut-off knob

9. Grind time presets

4. Grind weight preset

10. Grounds Bin

adjustment buttons

11. Burr calibration tool

5. Micro adjustment lever knob

(see manual)

6. Macro adjustment lever knob 12. Burr removal tool

11

1 2
3 6 8
6 4 8 9 12
Rev 1/5/2021 (v1.0)

®

QUICK START GUIDE

EN

GRIND SETTINGS CHART
The suggested settings below are starting points. You can adjust finer or coarser according to your taste or recipe preferences.

Espresso

AeroPress

Hario V60

Automatic Drippers Chemex

French Press

1Q*

3M

5M

6M

7M

9M

*Use the tool included to calibrate finer if needed. See owner's manual.

IF YOU NEED FURTHER SUPPORT:
In US & Canada contact Support@baratza.com or 425-641-1245 or toll free 877-701-2021

If you think your grinder is not performing correctly, go to our troubleshooting guides at baratza.com/troubleshooting
Outside North America, the warranty is provided by the company you purchased from. For service, find the nearest importer at baratza.com/international-importers-and-retailers

SAFETY INFORMATION:

Please read the information below very carefully. It contains important safety information for this appliance. Keep these instructions for future reference.

! Use only with AC current and the correct voltage. See the label on the
base of the grinder to determine the correct voltage.
! Only clean the grinder housing with a dry or slightly damp cloth. Do not
immerse the grinder, plug or cord in water or any other liquid.
! Baratza will not accept any liability for damage, injury, or warranty if the
grinder is used other than for its intended purpose (i.e. grinding roasted whole coffee beans) or is improperly operated or repaired.
! Do not operate the grinder with a damaged cord or plug. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
! Keep the appliance and its cord out of reach of children aged less than
8 years.

! Do not leave your grinder unattended while turned ON. ! This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
! Cleaning and user maintenance shall not be made by children without
supervision.
! Always unplug the grinder from the electrical supply before assembling,
disassembling or cleaning. To unplug, grasp plug and remove from the outlet. Never pull on the cord.
! CAUTION: ALWAYS unplug the electrical supply cord prior to cleaning
the grinder

CAUTION: ALWAYS unplug the electrical supply cord prior to cleaning the grinder.

Rev 1/5/2021 (v1.0)