AEHQ6617-00 - IT14G2
Caterpillar Inc.
C731153 IT14G2 Integrated Toolcarrier
IT14G2 Operating Specifications
Rated bucket capacity (§) Struck capacity (§) Width Dump clearance at full lift and 45° discharge (§) Reach at full lift and 45° discharge (§) Reach at 45° discharge and 2130 mm (7 ft) clearance (§) Reach with lift arms horizontal and bucket level Digging depth (§) Overall length Overall height with bucket at full raise (§) Loader clearance circle with bucket in carry position Static tipping load straight* (§) Static tipping load full 40° turn* (§) Breakout force (§) Operating weight*
General Purpose Buckets
With Bolt-On Cutting Edge
m3 1.3
1.4
yd3 1.7
1.8
m3 1.1
1.2
yd3 1.4
1.5
mm 2401 2401 ft/in 7'10.5" 7'10.5"
mm 2921 ft/in 9'7"
2886 9'6"
mm 787 823 ft/in 2'7" 2'8"
mm 1426 ft/in 4'8"
1443 4'9"
mm 2151 ft/in 7'1"
2201 7'3"
mm 174 174 in 6.9" 6.9"
mm 6424 6474 ft/in 21'1" 21'3"
mm 4802 4855 ft/in 15'9" 15'11"
m 10.40 10.42 ft/in 34'1" 34'2"
kg 5541 5495 lb 12,218 12,116
kg 4792 4750 lb 10,566 10,474
kg 7865 7435 lb 17,342 16,394
kg 8032 8044 lb 17,771 17,737
With Bolt-On Teeth
1.2
1.3
1.6
1.7
1.0
1.1
1.3
1.5
2424 2424 7'11.4" 7'11.4"
2977 9'9"
2942 9'8"
757 792 2'6" 2'7"
1351 4'5"
1368 4'6"
2090 6'10"
2140 7'0"
155 155 6.1" 6.1"
6506 6556 21'4" 21'6"
4802 4855 15'9" 15'11"
10.47 10.50 34'4" 34'5"
5637 5589 12,407 12,324
4882 4840 10,765 10,672
8456 7965 18,645 17,563
7990 8003 17,618 17,647
With Bolt-On Teeth and Segments
1.3
1.4
1.7
1.8
1.1
1.2
1.4
1.5
2424 2424 7'11.4" 7'11.4"
2930 9'7"
2895 9'6"
779 814 2'7" 2'8"
1375 4'6"
1390 4'7"
2139 7'0"
2189 7'2"
174 174 6.9" 6.9"
6524 6574 21'5" 21'7"
4802 4855 15'9" 15'11"
10.47 10.50 34'4" 34'5"
5503 5456 12,134 12,030
4754 4712 10,483 10,390
7920 7481 17,464 16,496
8063 8076 17,779 17,808
Penetration Buckets
With Flush Mounted Teeth
1.3 1.7
1.1 1.5
2434 7'11.8"
2942 9'8"
792 2'7"
1380 4'6"
2140 7'0"
155 6.1"
6554 21'6"
4855 15'11"
10.49 34'5"
5605 12,359
4855 10,705
7979 17,594
7990 17,618
*Static tipping and operating weights shown are for high-speed version IT14G2 and include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard 250 kg (550 lb) counterweight and 17.5-R25 (L2 equivalent) tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 and J742 govern loader rating, denoted in the text by (§).
IT14G2 Integrated Toolcarrier
IT14G2 Dimensions with Bucket
All dimensions are approximate.
57°
1 23
30°
5
4
6 7
48°
54° 49°
8
9 10
15.5-25, 12PR (L-2) 17.5-R25 (L-2 equivalent)
mm
ft/in
1
3100
10'2"
2
2255
7'5"
3
2080
6'10"
4
620
2'0"
5
1658
5'5"
6
1300
4'3"
7
2600
8'6"
8
374
1'3"
9
3565
11'8"
10
3798
12'6"
Dimensions vary with bucket. Refer to Operating Specifications chart on previous page.
Tread Width
mm
1800
in
70.9
mm
1800
in
70.9
Width over Tires
2223 87.5
2298 90.5
Ground Clearance
414 16.3
456 18.0
Change in Vertical Dimensions
42 1.7
-- --
IT14G2 Integrated Toolcarrier
IT14G2 Supplemental Specifications
Air conditioner Canopy, ROPS (less cab) Ride control Power train guard Secondary steering Tires and rims, 15.5-25, 12PR (L-2) Tires and rims, 15.5-25, 12PR (L-3) Tires and rims, 17.5-25, 12PR (L-2) Tires and rims, 17.5-25, 12PR (L-3) Tires and rims, 17.5-25, R25 (L-3 equivalent) Tires and rims, 17.5-25, R25 (L-2/L-3 equivalent)
Change in Operating Weight
kg
lb
+55
+121
122
269
+28
+62
+17
+37
+30
+66
140
309
76
168
40
88
+32
+71
+100
+220
+76
+168
Change in Articulated Static Tipping Load
kg
lb
+62
+137
89
196
+5
+11
+15
+33
+38
+84
84
185
46
101
21
46
+17
+37
+54
+119
+41
+90
Static tipping load changes are for an IT14G2 with lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard 250 kg (550 lb) counterweight, 17.5-R25 L-2 equivalent tires and a 1.3 m3 (1.7 yd3) general purpose bucket with bolt-on cutting edge.
IT14G2 Integrated Toolcarrier
IT14G2 Dimensions with Forks
All dimensions are approximate.
mm
ft/in
1
586
1'11"
2
1490
4'11"
3
745
2'5"
4
3708
12'2"
5
1808
5'11"
6
34
1.3"
Dimensions vary with fork length. Refer to Operating Specifications chart below.
1
2 3
4
6
5
IT14G2 Operating Specifications with Forks
Fork Tine Length Operating load:
Per SAE J1197 FEB91 (50% of full turn static tipping load) Per CEN 474-3, rough terrain (60% of full turn static tipping load) Per CEN 474-3, firm and level ground (80% of full turn static tipping load) Overall length
Load center
Static tipping load with level arms and forks, 600 mm (23.6 in) load center, straight* Static tipping load with level arms and forks, 600 mm (23.6 in) load center, full 40° turn* Operating weight*
1050 mm (3'5")
kg
1927
lb
4,249
kg
2312
lb
5,098
kg
3082
lb
6,796
mm
6723
ft/in
22'1"
mm
525
in
21"
kg
4447
lb
9,806
kg
3853
lb
8,496
kg
7898
lb
17,415
1200 mm (3'11")
1870 4,123
2244 4,948
2992 6,597
6873 22'7"
600 24"
4309 9,501
3734 8,233
7915 17,453
1350 mm (4'5")
1810 3,991
2172 4,789
2896 6,386
7023 23'1"
675 27"
4179 9,215
3620 7,982
7928 17,481
*Static tipping and operating weights shown are for an IT14G2 with lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard 250 kg (550 lb) counterweight and 17.5-R25 (L2 equivalent) tires.
Tipping load is defined by SAE J732.
IT14G2 Integrated Toolcarrier
IT14G2 Dimensions with Material Handling Arm
All dimensions are approximate.
mm
1
2522
2
1962
3
1402
4
3179
5
4178
6
5178
7
6840
8
6012
ft/in 8'3" 6'5" 4'7" 10'5" 13'8" 17'0" 22'5' 19'9"
1 2 3
7 8 9
4
5
10
6
9
5185
10
1585
11
1874
12
2670
13
3468
14
1514
15
2116
16
2719
17'0" 5'2" 6'2" 8'9" 11'5" 4'11" 6'11" 8'11"
14 15 16
11 12
13
IT14G2 Operating Specifications with Material Handling Arm
Material Handling Arm Position Operating load at 40° full turn Static tipping load, straight* Static tipping load, full 40° full turn* Operating weight*
Retracted
kg
1370
lb
3,021
kg
3158
lb
6,963
kg
2740
lb
6,042
kg
7770
lb
17,133
Mid-Position
1076 2,373
2484 5,477
2153 4,747
7770 17,133
Extended
888 1,958
2051 4,522
1777 3,918
7770 17,133
*Static tipping and operating weights shown include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard 250 kg (550 lb) counterweight and 17.5-R25 (L2 equivalent) tires.
NOTE: Machine stability and operating weights are affected by tire size, tire ballast and other attachments.
IT14G2 Integrated Toolcarrier
Typical Material Densities Loose
Basalt Bauxite, Kaolin Clay
natural bed dry wet Clay and gravel dry wet Decomposed rock 75% rock, 25% earth 50% rock, 50% earth 25% rock, 75% earth Earth dry, packed wet, excavated Granite broken Gravel pitrun dry dry, 6-50 mm (0.2-2 in) wet, 6-50 mm (0.2-2 in)
kg/m3 1960 1420
1660 1480 1660
1420 1540
1960 1720 1570
1510 1600
1660
1930 1510 1690 2020
lb/yd3 3,305 2,394
2,799 2,495 2,799
2,394 2,596
3,305 2,900 2,647
2,546 2,698
2,799
3,254 2,546 2,849 3,406
IT14G2 Bucket Size Selector
Gypsum broken crushed
Limestone broken crushed
Sand dry, loose damp wet
Sand and clay loose
Sand and gravel dry wet
Sandstone Shale Slag
broken Stone
crushed
Bucket Capacity
Material Density
1400
1600
1800
2000
2200
2400
2600 kg/m3
m3 yd3
1.2 1.6
1.3 1.7
1.4 1.8 2,400
2,700
3,000
3,300
3,600
3,900
4,200
lb/yd3
115% % = Bucket Fill Factor
100% 95%
kg/m3
1810 1600
1540 1540
1420 1690 1840
1600
1720 2020 1510 1250
1750
1600
lb/yd3
3,052 2,698
2,596 2,596
2,394 2,849 3,102
2,698
2,900 3,416 2,546 2,107
2,950
2,698
Acrobat Distiller 8.3.1 (Macintosh)