CommScope TeraSPEED® Plenum MPO Trunk Cable
Model: 760121897 | P-144-MP-8W-F12GR
Product Overview
This document details the specifications for the TeraSPEED® Plenum MPO Trunk fiber indoor cable. It features 144 fibers, organized into 12-fiber subunits, utilizing Singlemode G.652.D and G.657.A1 fiber types. The cable is gel-free, marked in feet, and has a green jacket.
Regional Availability: Asia | Australia/New Zealand | Latin America | Middle East/Africa | North America
Portfolio: Fiber indoor cable
Product Series: P-MP
General Specifications
| Cable Type | Fiber indoor cable |
| Construction Type | 144 fiber multi-unit with 12 fiber subunits |
| Subunit Type | Gel-free |
| Jacket Color | Green |
| Jacket Marking | Feet jacket marking |
| Subunit, quantity | 12 |
| Fibers per Subunit, quantity | 12 |
| Total Fiber Count | 144 |
| Buffer Tube/Subunit Diameter | 3 mm | 0.118 in |
| Diameter Over Jacket | 14.12 mm | 0.556 in |
Cable Construction Description: The cable consists of a central member, surrounded by 12-fiber subunits. Each subunit contains 12 fibers. A rip cord is included under the outer jacket for ease of access.
Mechanical Specifications
| Parameter | Value |
|---|---|
| Minimum Bend Radius, loaded | 197 mm | 7.756 in |
| Minimum Bend Radius, unloaded | 131 mm | 5.157 in |
| Tensile Load, long term, maximum | 400 N | 89.924 lbf |
| Tensile Load, short term, maximum | 1335 N | 300.12 lbf |
| Compression | 10 N/mm | 57.101 lb/in |
| Compression Test Method | FOTP-41 | IEC 60794-1 E3 |
| Flex | 300 cycles |
| Flex Test Method | FOTP-104 | IEC 60794-1 E6 |
| Impact | 0.74 N·m | 6.55 in lb |
| Impact Test Method | FOTP-25 | IEC 60794-1 E4 |
| Strain | See long and short term tensile loads |
| Strain Test Method | FOTP-33 | IEC 60794-1 E1 |
| Twist | 10 cycles |
| Twist Test Method | FOTP-85 | IEC 60794-1 E7 |
| Vertical Rise, maximum | 250 m | 820.21 ft |
Optical Specifications
| Fiber Type | Standard | Category |
|---|---|---|
| G.652.D and G.657.A1, TeraSPEED® | OS2 | OS2 |
Environmental Specifications
| Condition | Temperature Range |
|---|---|
| Installation temperature | 0 °C to +70 °C (+32 °F to +158 °F) |
| Operating Temperature | 0 °C to +70 °C (+32 °F to +158 °F) |
| Storage Temperature | -40 °C to +70 °C (-40 °F to +158 °F) |
Cable Qualification Standards
| Standard | Environmental Space | Flame Test Listing | Flame Test Method |
|---|---|---|---|
| ANSI/ICEA S-83-596 | Telcordia GR-409 | Plenum | NEC OFNP (ETL) and c(ETL) | NFPA 130 | NFPA 262 |
Environmental Test Specifications
| Test | Condition | Test Method |
|---|---|---|
| Heat Age | 0°C to +85°C (+32°F to +185°F) | IEC 60794-1 F9 |
| Low High Bend | 0°C to +70°C (+32°F to +158°F) | FOTP-37 | IEC 60794-1 E11 |
| Temperature Cycle | 0°C to +70°C (+32°F to +158°F) | FOTP-3 | IEC 60794-1 F1 |
Packaging and Weights
| Cable weight | 163 kg/km | 109.531 lb/kft |
Regulatory Compliance/Certifications
| Agency | Classification |
|---|---|
| CHINA-ROHS | Below maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| ROHS | Compliant |
| UK-ROHS | Compliant |
Included Products
- CS-8W-MP - TeraSPEED® OS2 Singlemode Fiber
Fiber Specifications (CS-8W-MP)
Product Classification
| Portfolio | Optical fiber |
| Product Type | OS2 Singlemode Fiber |
Dimensions
| Cladding Diameter | 125 µm |
| Cladding Diameter Tolerance | ± 0.7 µm |
| Cladding Non-Circularity, maximum | 0.7 % |
| Coating Diameter (Colored) | 249 µm |
| Coating Diameter (Uncolored) | 242 µm |
| Coating Diameter Tolerance (Colored) | ± 13 µm |
| Coating Diameter Tolerance (Uncolored) | ± 5 µm |
| Coating/Cladding Concentricity Error, maximum | 12 µm |
| Core Diameter | 8.3 µm |
| Core/Clad Offset, maximum | 0.5 µm |
| Proof Tensile Stress | 100,000 psi ( 0.69 GPa) |
Mechanical Specifications
| Fiber Curl, minimum | 4 m | 13.123 ft |
| Macrobending, 20 mm Ø mandrel, 1 turn | 0.75 dB @ 1,550 nm | 1.50 dB @ 1,625 nm |
| Macrobending, 30 mm Ø mandrel, 10 turns | 0.25 dB @ 1,550 nm | 1.00 dB @ 1,625 nm |
| Macrobending, 60 mm Ø mandrel, 100 turns | 0.05 dB @ 1,550 nm | 0.05 dB @ 1,625 nm |
| Coating Strip Force, maximum | 8.9 N | 2.001 lbf |
| Coating Strip Force, minimum | 1.3 N | 0.292 lbf |
| Dynamic Fatigue Parameter, minimum | 20 |
Optical Specifications
| Cabled Cutoff Wavelength, maximum | 1260 nm |
| Point Defects, maximum | 1 |
| Zero Dispersion Slope, maximum | 0.092 ps/(nm²·km) |
| Zero Dispersion Wavelength, maximum | 1322 nm |
| Zero Dispersion Wavelength, minimum | 1302 nm |
Optical Specifications, Wavelength Specific
| Attenuation, maximum @ 1310 nm | 0.32 dB/km |
| Attenuation, maximum @ 1385 nm | 0.30 dB/km |
| Attenuation, maximum @ 1550 nm | 0.21 dB/km |
| Attenuation, maximum @ 1625 nm | 0.23 dB/km |
Backscatter Coefficient
| Backscatter Coefficient @ 1550 nm | -80.5 dB/km |
| Backscatter Coefficient @ 1625 nm | -79.0 dB/km |
Dispersion
| Dispersion, maximum @ 1310 nm | 3.5 ps/(nm·km) |
| Dispersion, maximum @ 1550 nm | 18.0 ps/(nm·km) |
Index of Refraction
| Index of Refraction @ 1310 nm | 1.467 |
| Index of Refraction @ 1550 nm | 1.468 |
Mode Field Diameter
| Mode Field Diameter @ 1310 nm | 9.2 µm ± 0.4 µm |
| Mode Field Diameter @ 1550 nm | 10.4 µm ± 0.5 µm |
Polarization Mode Dispersion
| Polarization Mode Dispersion Link Design Value, maximum | 0.04 ps/sqrt(km) |
Standards Compliance
| Standards Compliance | TIA-568-C.3 | IEC 60794-2-20 | IEC 60794-3-10 | IEC 60794-3-20 | IEC 60794-3-30 |
Environmental Specifications
| Heat Aging, maximum | 0.05 dB/km @ 85°C |
| Temperature Dependence, maximum | 0.05 dB/km |
| Temperature Humidity Cycling, maximum | 0.05 dB/km |
| Water Immersion, maximum | 0.05 dB/km @ 23°C |
Regulatory Compliance/Certifications
| Agency | Classification |
| IS0 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
