1. Read, Retain and Follow All Instructions. Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings. Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning.
LCD FLAT PANEL HDTV MODELS LT-46244 LT-52244 OWNER’S GUIDE • For questions: - Visit our website at www.mitsubishi-tv.com. - E-mail us at MDEAservice@mdea.com.
Mitsubishi LT52244 LT-52244 082400025500
LCD FLAT PANEL HDTV
MODELS
LT-46244 LT-52244 OWNER'S GUIDE
· For questions: - Visit our website at www.mitsubishi-tv.com. - E-mail us at MDEAservice@mdea.com. - Call Consumer Relations at 800-332-2119.
· For information on System Reset, please see the back cover. · To order replacement or additional remote controls or Owner's Guides, visit our website at
www.mitsuparts.com or call 800-553-7278. · Guidelines for setting up and using your new widescreen TV start on page 12.
x.v.Color
D A I LY
For Your Records Record the model number, serial number, and purchase date of your TV. The model and serial numbers are on the back of the TV. Refer to this page when requesting assistance with the TV. MODEL NUMBER SERIAL NUMBER PURCHASE DATE RETAILER NAME LOCATION
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TV WEIGHT: This TV is heavy! Exercise extreme care when lifting or moving it. Lift or move the TV with a minimum of two adults. To prevent damage to the TV, avoid jarring or moving it while it is turned on. Always power off your TV, unplug the power cord, and disconnect all cables before moving it. WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
FCC Declaration of Conformity
Product: Models: Responsible Party:
Telephone:
LCD HDTV Display
LT-46244, LT-52244
Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road Irvine, CA 92618-1904
(800) 332-2119
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Mitsubishi could cause harmful interference and would void the user's authority to operate this equipment.
Contents
Important Information About Your TV Installation Notes. . . . . . . . . . . . . . . . . . . . . . . . . 4 TV Guide Daily Access Requirements. . . . . . . . . . 4 General Warnings and Cautions, Notes on Installation and Operation.. . . . . . . . . . . . . . . . . 4 Important Safeguards.. . . . . . . . . . . . . . . . . . . . . 5
1 Television Overview Package Contents. . . . . . . . . . . . . . . . . . . . . . . . 6 Special Features of Your TV. . . . . . . . . . . . . . . . . 6 TV Front Panel.. . . . . . . . . . . . . . . . . . . . . . . . . . 7 TV Side Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TV Back Panel.. . . . . . . . . . . . . . . . . . . . . . . . . . 9 Stand Removal Instructions. . . . . . . . . . . . . . . . 11
2 TV Setup Guidelines for Setting Up and Using Your New Widescreen TV. . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the Remote Control Batteries. . . . . . . . 13 When You First Power On the TV.. . . . . . . . . . . . 13 Initial TV Setup.. . . . . . . . . . . . . . . . . . . . . . . . . 13 Setting Up TV Inputs. . . . . . . . . . . . . . . . . . . . . 14 Controlling A/V Receiver Sound Volume.. . . . . . . 15 Using a CableCARD.. . . . . . . . . . . . . . . . . . . . . 16 Using the TV with a Personal Computer.. . . . . . . 17
3 TV Connections Before you Begin. . . . . . . . . . . . . . . . . . . . . . . . 19 Cable Management. . . . . . . . . . . . . . . . . . . . . . 19 HDTV Cable Box or Satellite Receiver with Component Video. . . . . . . . . . . . . . . . . . . . . . 20 HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device). . . . . . . . . . . . . . . . 21 Standard Cable Box, Satellite Receiver, or Other Device with S-Video. . . . . . . . . . . . . . . . . . . . . 21 Direct Cable (no cable box).. . . . . . . . . . . . . . . . 22 Antennas with Separate UHF and VHF Leads. . . . 22 Antenna with a Single Lead.. . . . . . . . . . . . . . . . 22 DVD Player with Component Video. . . . . . . . . . . 23 DVI Video Device (Cable Box, Satellite Receiver, DVD Player, or Other Device).. . . . . . . . . . . . . . 23 VCR to an Antenna or Wall Outlet Cable.. . . . . . . 24 VCR to a Cable Box (Audio & Video).. . . . . . . . . . 25 A/V Receiver (Sound System). . . . . . . . . . . . . . . 26 Older Cable Box. . . . . . . . . . . . . . . . . . . . . . . . 26 Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4 TV Operation and Features Choosing a Viewing Source. . . . . . . . . . . . . . . . 28
Sleep Timer.. . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . 29 ChannelView Channel Listings.. . . . . . . . . . . . . . 31 Status Display. . . . . . . . . . . . . . . . . . . . . . . . . . 32 Fav (Favorite Channels).. . . . . . . . . . . . . . . . . . . 33 TV Signals and Display Formats. . . . . . . . . . . . . 34 Viewing Camera Files.. . . . . . . . . . . . . . . . . . . . 35
JPEG Photos and the USB Photo Port. . . . . . 35 Photos and Moving Video as Composite
Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5 TV Menu Settings Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Remote Control Keys for the TV Menu System. . . 37 AV Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Video Menu . . . . . . . . . . . . . . . . . . . . . . . . 39 Audio Menu . . . . . . . . . . . . . . . . . . . . . . . . 40 Captions Menu. . . . . . . . . . . . . . . . . . . . . . . . . 41 Setup Menu.. . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Inputs Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Lock Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Pass Codes.. . . . . . . . . . . . . . . . . . . . . . . . 48 Parent Menu. . . . . . . . . . . . . . . . . . . . . . . . 48 Other Menu (Alternate Rating System). . . . . . 48 Bypassing TV Locks.. . . . . . . . . . . . . . . . . . 48
6 NetCommand About NetCommand. . . . . . . . . . . . . . . . . . . . . 51 IR Emitter Placement. . . . . . . . . . . . . . . . . . . . . 52 Initial NetCommand Setup for Most Devices.. . . . 53 Adding or Removing Device Keys from NetCommand Control.. . . . . . . . . . . . . . . . . . . 53 NetCommand Specialized Device Keys. . . . . . . . 54 Operating NetCommand-Controlled Devices. . . . 55 Setting Up NetCommand Control of an A/V Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Appendices Appendix A: Bypassing the Parental Lock. . . . . . 61 Appendix B: Specifications. . . . . . . . . . . . . . . . 63 Appendix C: TV Guide Daily.. . . . . . . . . . . . . . . 64 Appendix D: Programming the Remote Control. . 68 Appendix E: Troubleshooting. . . . . . . . . . . . . . . 76
Trademark and License Information. . . . . . . . . . . 82
Mitsubishi TV Software. . . . . . . . . . . . . . . . . . . . 83
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Important Information About Your TV
Installation Notes
Wall Mount Requirements For wall-mounting, see "Stand Removal Instructions."
Use with other than the authorized accessories may cause the TV to become unstable, which can cause damage to the product or possible injury.
Custom cabinet installation must allow for proper air circulation around the television.
NOTE TO CATV SYSTEM INSTALLER: THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR THE PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
If Your TV Gets Damaged
Crystalline liquid may leak from the LCD panel and broken glass may be scattered.
CAUTION: The crystalline liquid is toxic. Avoid contact with your skin, eyes, or mouth. DO NOT touch the broken glass or crystalline liquid. DO NOT get glass fragments or crystalline liquid into eyes or mouth. Should either contact with your eyes or mouth, rinse the contacted area thoroughly with water and consult your doctor.
Disposal of Your TV
The LCD panel contains a small amount of crystalline liquid and the fluorescent tube in the panel contains mercury. Both are toxic and should not be touched.
DO NOT dispose of the TV with general household waste. THE LAMPS INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, AND FEDERAL LAWS. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eiae.org.
Internal Fan
This TV has an internal cooling fan that may be audible while the TV is powered on.
TV Guide Daily Access Requirements
TV Guide Daily listings are not provided by Mitsubishi Digital Electronics America, Inc. Operation of TV Guide Daily requires over-the-air or direct cable (no cable box) access to stations carrying TV Guide Daily program listings. If listings are not available in your area or become discontinued by the local provider, TV Guide Daily will not operate. TV Guide Daily does not provide program listings for satellite TV systems.
Cleaning Recommendations
Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines:
First, turn off the TV and unplug the power cord from the power outlet.
Top and Sides of the TV
· Occasionally clean dust build-up from the air-intake grilles on the back and sides of the TV. Clean using a vacuum cleaner with a brush attachment.
· Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.
· For oily dirt, add a few drops of mild liquid detergent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moistened only with water. Dry with a third dry, soft, non-abrasive cloth.
LCD Screen Cleaning
IMPORTANT DO NOT apply any type of liquid to the surface of the TV screen.
· Only use a soft, dry cloth to clean the LCD
screen. Do not use any liquids. · Wipe the screen gently with an up and down
motion. · Clean the entire screen evenly, not just sections of
the screen.
General Cleaning Precautions
· DO NOT allow liquid to enter the TV through the ventilation slots or any crevice.
· DO NOT use any strong or abrasive cleaners, as these can scratch the surfaces.
· DO NOT use any cleaners containing ammonia, bleach, alcohol, benzene, or thinners, as these can dull the surfaces.
· DO NOT spray liquids or cleaners directly on the TV's surfaces.
· DO NOT scrub or rub the TV harshly. Wipe it gently.
TV Software
Do not attempt to update the software of this TV with software or USB drives not provided by or authorized by Mitsubishi Digital Electronics America, Inc. Nonauthorized software may damage the TV and will not be covered by the warranty.
Important Safeguards
Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All Instructions. Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions.
2. Heed Warnings. Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning. Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive or aerosol cleaners. Cleaners can permanently
damage the cabinet and screen. Use a lightly dampened cloth for cleaning. 4. Attachments and Equipment. Never add any attachments and/or equipment without approval of the manufacturer as such additions may
result in the risk of fire, electric shock or other personal injury. 5. Water and Moisture. Do not use the TV where contact with or immersion in water is possible. Do not use near bath tubs, wash bowls, kitchen
sinks, laundry tubs, in a wet basement, swimming pools, etc. 6. Accessories. Do not place the TV on an unstable cart, stand, tripod, or table. The TV may fall, causing serious injury to a
child, adult or pet and serious damage to the TV. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the TV. Any mounting of the TV should follow the manufacturer's instructions, and should use mounting accessories recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
7. Ventilation. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to protect it from
overheating. Do not block these openings or allow them to be obstructed by placing the TV on a bed, sofa, rug, or other similar surface. Nor
should it be placed over a radiator or heat register. If the TV is to be placed in a rack or bookcase, ensure that there is adequate ventilation and
that the manufacturer's instructions have been adhered to.
8. Power Source. This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of
power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or Polarization. This TV is equipped with a polarized alternating current line plug having one blade wider than the other. This plug
will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
10. Power-Cord Protection. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the TV.
11. Lightning. For added protection for this TV during a lightning storm, or when it is left unattended and unused for long period of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.
12. Power Lines. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal. 13. Overloading. Do not overload wall outlets and extension cords as this can result in a risk of fire or
E XAMP LE OF ANTE NNA G R OUNDING
electric shock. 14. Object and Liquid Entry. Never push objects of any kind into this TV through openings as they
ANTE NNA LE AD IN WIR E
may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV. 15. Outdoor Antenna Grounding. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
G R OUND C LAMP
E LE C TR IC S E R VIC E E QUIP ME NT
ANTE NNA DIS C HAR GE UNIT (NE C AR TIC LE 810-20)
GR OUNDING CONDUCTOR S (NE C AR TIC LE 810-21)
G R OUND C LAMP S
Article 810 of the National Electric Code, ANSI/NFPA No. 70-2002, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, con-
NE C -- NATIONAL E LE C TR IC AL C ODE
POWE R S E R VIC E GR OUNDING E LE CTR ODE S YS TE M (NE C AR T 250, PAR T H)
nection to grounding electrodes, and requirements for the grounding electrode.
16. Servicing. Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
17. Damage Requiring Service. Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
(a) When the power-supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni-
cian to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
18. Replacement Parts. When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
19. Safety Check. Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to determine that the TV
is in safe operating condition.
20. Heat. The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers)
that produce heat.
1
Television Overview
Package Contents
Please take a moment to review the following list of items to ensure that you have received everything.
1. Remote Control
2 AA
2. Two AA Batteries
AA
3. Owner's Guide
4. Quick Reference Guide
1
5. Quick Connect Guide
6. Product Registration Card
7. Four-Ended IR Emitter
8. One Cable Tie
7
9. One Cable Clamp
Special Features of Your TV
Your new high-definition widescreen television has many special features that make it the perfect center of your home entertainment system, including:
1080p High-Definition LCD Display System
Your Mitsubishi LCD Flat Panel HDTV uses a full 1920 x 1080 LCD panel to create the picture you see on the screen. All images are displayed at 1080p. The TV uses Plush 1080pTM to convert lower-resolution signals to 1080p for display. HDMI 1080p signals are displayed without overscan when received on inputs named Game (if Picture Mode Game is selected) or on inputs named PC.
Smooth120HzTM Operation
Smooth120HzTM enables the display of more fluid and smoother fast-moving images, free from motion blur. In these LCD Flat Panel HDTVs, Smooth120HzTM doubles the traditional progressive scan frame rate and creates new frames of video in between each of the traditional frames, providing the panel with additional information to smooth moving images.
16:9 Widescreen Picture Format
Enjoy a full theatrical experience in the comfort of your home. View pictures as film directors intended them. Digital TV broadcasts, DVDs and newer video game consoles support this widescreen format.
Integrated HDTV Tuner
Your widescreen Mitsubishi HDTV has an internal HDTV tuner able to receive both over-the-air HDTV broadcasts (received via an antenna) and digital cable broadcasts, including HDTV cable programming (when authorized by the CableCARD provider).
High-Definition Video Inputs
Component Video Inputs. Also called Y/Pb/Pr inputs, these inputs receive standard analog video formats of 480i, 480p, 720p, and 1080i high-definition signals. This provides a high level of flexibility when connecting DVD players/recorders, cable boxes, and satellite receivers.
HDMI 1.3 Inputs. These inputs accept digital 480i, 480p, 720p, 1080i, and 1080p video signals plus PCM digital stereo signals. The HDMITM inputs can also accept a variety of PC signals and resolutions. These inputs are compatible with Deep Color and x.v.Color.
Used with an adapter, these inputs also accept compatible digital DVI video signals. HDMI inputs provide additional high-performance, highdefinition connections for maximum flexibility in your choice of home theater products. The HDMI inputs are HDCP copy-protection compatible.
Easy Connect Auto Input Sensing
Easy ConnectTM Auto Input Sensing automatically recognizes when you plug in an input and prompts you to assign a name to it. The TV ignores any unused inputs, so the result is an uncluttered Input Selection menu where you can easily find and select connected devices by name.
Home Theater Control
NetCommand with IR Learning
Your Mitsubishi HDTV offers a new level of networking that seamlessly integrates selected older A/V products with new and future digital products. NetCommand® supports IR (infrared) control of products such as VCRs, DVD players, cable boxes, and satellite receivers. NetCommand can "learn" remote control signals directly from many devices, allowing you to create a customized NetCommand-controlled home-theater system.
NetCommand for HDMI Devices
Some newer HDMI devices may be compatible with the TV's NetCommand for HDMI feature. Compatible devices can receive control signals through the HDMI connection. The TV's remote control may be able to operate some functions of these devices without any further setup.
Swivelling Stand
The included stand allows the TV to be manually swiveled up to 30 degrees left or right to the best viewing angle.
TV Guide Daily Interactive Program Guide
TV Guide Daily is a subscription-free guide system. It lists regular, digital, and high-definition programming being broadcast in your area over the next twenty-four hours.
1. Television Overview
TV Front Panel
Indicator Lights
Lights (located on the front left) indicate whether the TV is on or off, a timer is set, and the overall functional status of the TV. See chapter 4, "TV Operation and Features," for more information.
Side Panel (Controls and Inputs)
Remote Control IR Sensors
Decorative Blue Light (see options in the AV > Global > Blue Glow menu)
Power and Status Indicators
Off
Steady On
Slow Blinking
Fast Blinking
POWER/TIMER Indicator
LED Color TV Condition
Additional Information
None
Standby condition.
Normal operation.
Blue
TV is powered on.
Normal operation.
Blue
TV powered off, auto-on timer is set.
Normal operation. TV can be turned on at any time.
Blue
1. TV just plugged into AC outlet.
Wait approximately one minute for blinking to stop before turning on. Normal operation.
2. AC just restored after power failure.
3. TV rebooting after System Reset used.
4. TV rebooting after power fluctuation or receiving abnormal digital signals from a digital channel or digital device.
5. You have begun the procedure to update software from an authorized flash memory device.
STATUS Indicator
LED Color None Red
TV Condition Normal TV on or standby condition. TV may require service.
Additional Information Normal operation.
Turn off the TV and unplug the set from the AC power source. Wait one minute and then plug the set back in. See Appendix E. If the LED is still on, contact your dealer or a Mitsubishi Authorized Service Center. Go to www.mitsubishi-tv.com or call 1-800-332-2119 to receive Authorized Service Center information.
1. Television Overview
TV Side Panel
The side panel contains TV control buttons and additional input jacks.
System Reset Button (see more information below)
Side Panel Buttons duplicate some keys on the TV remote control
See chapter 4, "TV Operation and Features"
Side Panel Jacks
Side Panel Input Jacks
1
Component 3 Jacks (five jacks)
2
Input 3 (lower three jacks)
3
See chapter 3,
4
"TV Connections"
System Reset Button
If the TV does not respond to the remote control, side panel controls, or will not power on/off, press the SYSTEM RESET button on the side panel with a pointed object, such as the point of a pencil or end tip of a paperclip.
The blue POWER LED will flash quickly for about one minute. When the blue POWER LED stops flashing, you may turn on the TV. Recent setting changes you made before using SYSTEM RESET may be lost.
A/V Reset
If you wish to reset the A/V (Audio/Video) settings back to the factory defaults: · To reset all settings at once, press GUIDE and FORMAT
on the side panel at the same time. · To reset the defaults for individual inputs, use the
Reset selection found in the AV menu.
1. COMPONENT 3 Inputs (Audio and Video)
Y Pb Pr (480i/480p/720p/1080i) COMPONENT 3 is a third set of component inputs. Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. See Appendix B, "Specifications," for signal compatibility.
2. INPUT 3 (Audio and Video)
The INPUT 3 jacks have multiple uses. The Y/VIDEO jack can serve either as a yellow composite video jack or as a green component video jack. The audio jacks can be used with either the composite or component inputs nearby on the side panel. The audio jacks also work with a DVI source connected to HDMI 4.
3. HDMI 4
HDMI 4 is an HDMITM input located on the TV's side panel for convenience. See item 6, "HDMI Inputs" for description and use. When you connect a DVI device to HDMI 4, connect analog audio cables to the nearby INPUT 3 L and R audio jacks to hear analog audio from the device.
4. USB Photo Port
The USB port is used for viewing JPEG images. See chapter 4, "TV Operation and Features" for more information.
TV Back Panel
10
TV Back Cover
$BCMF$"3% "$$&44%003
#"$,1"/&-
#"$,1"/&--"#&-
4*%& 1"/&-
"/5"69 "/5."*/
"55&/5*0/ "MJHOTUSBJHIUXJUI)%.*KBDL
UIFO JOTFSUHFOUMZ
34
:
47*%&0
1C
7*%&0
.0/0
3
*/165
1S 3
-
.0/0
"73 "6%*0065165
3
$0.10/&/5
*/1654 JQQJ
1$%7* "6%*0*/165
3
-
.0/0
#"$,1"/&-
Label for Back Panel #2
"/5"69 "/5."*/ 64&8*5)$BCMF$"3%
"55&/5*0/ "MJHOTUSBJHIUXJUI)%.*KBDL
UIFO JOTFSUHFOUMZ
"6%*0
"6%*0
1. Television Overview
9
Back Panel #1
4
34
:
47*%&0
1C
7*%&0
1S 3
-
-
.0/0
-
.0/0
""67%3*"070036561655
3
3
%1$7*%*7/*
"6%*0*/165
*/165
$$00..1100//&&//55 J**//11Q6655Q44J
3
-
.0/0
Back Panel #2
ANT 1/MAIN (jack at rear of recessed area)
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
ANT 2/AUX (jack closest to you)
8 1
Dealer Use Only
7 6
1. ANT 1/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna, direct cable without a cable box, or are using cable with a CableCARDTM, connect the main antenna or cable source to ANT 1/MAIN. Use ANT 2/AUX for a secondary source.
ANT 1/MAIN and ANT 2/AUX can each receive digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable source.
ANT 1/MAIN and CableCARD
Use ANT 1/MAIN to receive premium subscription cable TV service authorized by the CableCARDTM access card. The CableCARD access card is provided by your local cable company. ANT 2/AUX can continue to receive over-the-air or non-scrambled cable signals when ANT 1 is used for CableCARDTM service.
5
2
3
2. COMPONENT Inputs (Audio and Video)
Y Pb Pr (480i/480p/720p/1080i) Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. See Appendix B specifications for signal compatibility.
3. PC/DVI AUDIO INPUT
Use the PC/DVI AUDIO INPUT when connecting a DVI device to one of the TV's HDMI inputs using a DVI-toHDMI cable. These jacks allow you to send left and right analog audio from a PC or DVI device to the TV.
4. AVR AUDIO OUTPUT
Use the AVR AUDIO OUTPUT jacks to send analog audio of the program currently shown on the screen to an A/V surround sound receiver or stereo system. Digital audio from digital channels and HDMI devices is converted to analog audio by the TV. If using an analog
10
1. Television Overview
TV Back Panel, continued
A/V receiver or stereo system, this is the only audio connection needed between it and the TV.
5. INPUT 1, 2 (Audio and Video)
Input 1 and 2 can be used to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other A/V device to the TV. Each TV INPUT group consists of jacks for composite video, S-Video, and analog stereo audio. Note that when you connect to the S-video jack, the composite video jack is automatically disabled. INPUT 3 is a third set of composite video and stereo audio jacks located on the side of the TV for convenience.
6. HDMI Inputs
The HDMITM 1.3 (High Definition Multimedia Interface) supports uncompressed standard and high-definition digital video formats and PCM digital stereo audio format.
Use the HDMI inputs to connect to CEA-861 HDMI compliant devices such as a high-definition receiver or DVD player. These inputs support 480i, 480p, 720p, 1080i, and 1080p video formats, plus PCM digital stereo audio.
Mitsubishi recommends you use category 2 HDMI cables to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color.
These inputs can also accept digital DVI video signals. To connect a DVI source, use an HDMI-to-DVI adapter or cable plus analog audio cables. Connect the analog audio cables to PC/DVI AUDIO INPUT on the back of the TV to receive left and right stereo audio from your PC or DVI device.
The TV's HDMI inputs are compatible with many DVI-D and HDMI computer video signals. See chapter 2, "TV Setup" and Appendix B for additional information on PC compatibility.
These inputs are HDCP (High-Bandwidth Digital Copy Protection) compliant.
These inputs are
certified for proper interop-
erability with other products certified by SimplayTM.
7. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Analog audio from analog channels and devices is converted by the TV to PCM digital audio. If you have a digital A/V receiver, in most cases this is the only audio connection needed between the TV and your A/V receiver.
HDMI Cable Categories HDMI cables are available as Category 1 and Category 2 versions. · Category 2 Cables. Newer, HDMI 1.3-com-
pliant DVD players, video games, and set-top boxes require Category 2 cables. Use category 2 cables for these high-speed HD signals carrying extended color encodings (i.e., 30 or more bits, also called Deep Color). Category 2 cables are also suitable for standard HDTV signals. · Category 1 Cables. Unmarked cables are category 1 cables and are suitable for standard HDTV signals, including 1080p signals.
8. IR Emitter NetCommand®
IR Emitters connected to this jack are used by the TV's NetCommand system to control external IR remote controlled analog devices such as cable boxes, VCRs, DVDs, satellite receivers and audio receivers.
9. RS-232 Port
Use this port with external control systems for the control of TV power, channel, format, volume, and mute. For detailed information and control codes, please visit our website at www.mitsubishi.com.
10. CableCARD Slot
Insert the CableCARDTM access card into the slot located behind the CableCARD access door. When inserting the card, ensure that the top of the card faces in the direction indicated by CARD TOP.
If your cable company is not currently offering CableCARD access cards, use the cable box provided and authorized by your local cable company to view scrambled channels.
When using a CableCARD, make sure the incoming Cable-TV cable is connected to the TV's ANT1/MAIN jack on the back of the TV (Back Panel #2).
This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A security card provided by your cable operator is required to view encrypted digital programming. Certain advanced and interactive digital cable services such as video-on-demand, a cable operator's enhanced program guide and data-enhanced television services may require the use of a set-top box. For more information call your local cable operator.
1. Television Overview
11
Stand Removal Instructions
CAUTION
At least TWO PEOPLE are needed to safely remove the stand. One person must hold the TV while the other person removes the stand. Failure to follow these recommendations may result in personal injury, as well as damage to the product.
Stand Removal Procedure:
1. Before starting to remove the stand, make sure to disconnect AC power cord from AC power outlet.
2. Spread the protective sheet that was wrapped around the TV on a flat, even surface (such as a sturdy table). The protective sheet will help prevent the display from being damaged.
IMPORTANT: To avoid damaging the screen, make sure there are no foreign objects under or on top of the protective sheet.
3. With two people firmly grasping the left and right sides of the TV, gently place TV face down on the protective sheet with the display stand hanging over the edge of the table. See the illustration to the right.
4. Use a magnetic philips screwdriver to remove the four stand screws from the recessed holes (see illustration to right). Note: A regular screwdriver can be used with a separate magnetic pickup tool.
5. With one person holding the TV with both hands, grasp the plastic portion of the stand (see illustration to the right) and remove the stand by pulling it away from the TV in the direction of the large arrow shown in both illustrations.
6. The TV is now ready for wall mounting. See Wall Mount Kit below.
Wall Mount Kit (purchased separately)
To order a Wall Mounting Kit, please contact Peerless Industries, Inc. at (800) 473-3753 or visit www.peerlessmounts.com. Use wall mounting kit Model ST650.
Note: Complete instructions are included with the kit.
To order a Wall Mounting Kit from Mitsubishi Digital Electronics America, Inc., please visit www.mitsuparts.com or call (800) 553-7278.
1SPUFDUJWF
57
TIFFU
4UBOE
5BCMF
4UBOE4DSFXT JOSFDFTTFEIPMFT
57#BDL$PWFS 1SPUFDUJWF4IFFU
1MBTUJD 1PSUJPOPG 4UBOE
CAUTION: Use with other than the authorized accessories may cause the TV to become unstable, which can cause damage to the product or possible injury.
IMPORTANT Before attaching the wall mount kit to the TV, be sure to connect all necessary cables to jacks on the back of the TV. After wall-mounting, these jacks will not be accessible. If you plan to connect a PC to the TV, before wall-mounting be sure to connect an HDMI cable and sound cable (if required) to the proper inputs on the back of the TV. You can also use the HDMI 4 jack on the side panel.
12
2 TV Set-Up
Guidelines for Setting Up and Using Your New Widescreen TV
Getting Started
1. Review the important safety, installation, and operating information at the beginning of this book.
2. Choose a location for your TV.
· Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV.
· Avoid locations where light may reflect off the screen.
· If wall-mounting the TV, see "Stand Removal Instructions" in chapter 1, "Television Overview."
3. Install the batteries in the remote control. See the following page. See chapter 4, "TV Operation and Features" for more on use of the remote control.
4. Plug your TV into a power outlet. The LED on the front of the TV will start blinking rapidly. After the LED stops blinking, press the POWER key to power on the TV.
5. When the Welcome screen appears the first time you power on the TV, select a language for TV menus. You can later change the language through the Setup menu.
6. Connect your audio/video (A/V) devices to the TV and perform initial setup.
· See chapter 3, "TV Connections" for connection diagrams.
· See the following pages for initial TV setup and use of the Auto Input Sensing feature.
· See chapter 6, "NetCommand," to perform NetCommand IR "learning" for control of your home theater.
7. Mitsubishi recommends you perform a channel scan for channels received on ANT 1 and ANT 2. See "Initial TV Setup" on the following pages.
8. You can now start watching TV or you can perform additional setup and customization through the TV menus.
TV Operation
1. Review chapter 4, "TV Operation and Features," for TV features including:
· Input Selection (viewing source). Select a connected program source to watch, such as a VCR, DVD player, or antenna. Press INPUT on the remote control to select from icons for the TV inputs. See "Choosing a Viewing Source."
· ChannelViewTM/TV Guide Daily. Press GUIDE to see channel listings for programs on ANT 1 and ANT 2. To override ChannelView and use the TV Guide Daily system, see Chapter 5, "TV Menu Settings" and the Inputs menu Guide options.
· Picture Formats. Press FORMAT to cycle through picture sizes and shapes to find the one best suited to the current program. See "TV Signals and Display Formats."
2. To understand use of the Input Selection menu with NetCommand-controlled devices, see "Using NetCommand."
3. To view JPEG photo files on the TV, see "Viewing Camera Files."
Additional TV Setup
1. Review chapter 5, "TV Menu Settings," to customize TV operation. Press the MENU key to enter the menu system. Some examples of settings you may wish to change include:
· Fav. Use an on-screen menu to create custom lists of your favorite channels from ANT 1 and ANT 2. See Setup > Edit.
· Order. Rearrange the device icons in the Input Selection menu to put frequently used icons near the front. See Inputs > Order.
· Name. Change the device names that appear in the Input Selection menu. See the Inputs menu Name options.
· TV Guide Daily. Set up and enable the TV Guide Daily system. See the Inputs > Guide menu.
2. TV Setup
13
· Parental Locks. Restrict TV viewing by program rating, by channel, or by time of day. You can also disable the side-panel buttons if you have small children. See the Lock > Parent menu, the Lock > Front Panel menu, and Setup > Edit > Lock.
· Video Settings. Change video adjustments to get the best picture for your viewing conditions. See "AV Menu."
Note: You may wish to change the Picture Mode from the default Brilliant to either Bright or Natural, which are suitable for most home viewing.
2. To program the remote control to operate A/V devices not under NetCommand control, see Appendix D, "Programming the Remote Control."
TV Care
General Cleaning. See the cleaning recommendations under "Important Information About Your TV."
Assistance
· For troubleshooting, service, and product support, see Appendix E.
· For warranty information, see the TV warranty in the back of this book.
Installing the Remote Control Batteries
1. Remove the remote control's back cover by gently pressing in the tab and lifting off the cover.
2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) end first.
3. Snap the cover back in place.
1
When You First Power On the TV
Turning the TV On or Off To turn the TV on or off, point the remote control at the front of the TV and press the POWER key. Alternatively, press the POWER button on the side panel of the TV.
Choosing a Language for Menus
1. Power on the TV for the first time. 2. Press to select either English or Spanish
for all menus. You can later change the language selection through the Setup menu Language option.
When you first power on the TV, the Welcome screen lets you change the menu language.
Initial TV Setup
Use the Setup menu for basic TV setup options. 1. Press MENU to open the Main menu. 2. Press to highlight the Setup icon and display the
Setup menu.
2 The remote control requires two AA alkaline batteries.
Setup menu highlighted in TV Main menu
14
2. TV Setup
Initial TV Setup, continued
Change the Menu Language
Choose to display on-screen menus in either English or Spanish (Español).
Select a menu language in the Setup menu.
1. With the Setup menu displayed, press to highlight the Language icon.
2. Press to highlight either English or Spanish. 3. Press MENU to return the highlight to the top row of
icons.
Memorize Channels (Channel Scan)
For ANT 1/MAIN and ANT 2/AUX
Start a channel scan (memorization) from the Setup menu.
Note:
If using a CableCARD, the TV will automatically acquire the complete list of available channels from the service provider. Perform channel memorization for ANT 1 CableCARD service only if you need to reacquire the channel list.
To start channel memorization
1. With the Setup menu displayed, press to highlight the Scan icon.
2. Press to highlight an input selection based on your connections:
Input
Ant 1 Air Ant 2 Air
Ant 1 Cable Ant 2 Cable
Condition
When connected to an indoor or outdoor antenna
When connected to direct cable (no cable box)
3. Press to highlight the on-screen START button. 4. Press ENTER to start automatic channel memoriza-
tion. To stop channel memorization before completion, press CANCEL. 5. When memorization is complete you can: · Press MENU once to return to the top row of icons. · Press MENU again to return to the Main menu. · Press EXIT to watch TV.
After channels have been memorized: · To tune to memorized channels, press CH /
while watching TV on the ANT 1 or ANT 2 inputs. · Use the Setup > Edit menu for additional channel
options, such as adding or deleting channels from memory, naming channels, and saving favorite channels in custom memory banks.
Additional TV Setup Using the Setup Menu
See chapter 5, "TV Menu Settings," to: · Edit channel options · Set the TV clock · Set the TV Timer · Select an Energy Mode to manage power use while
the TV is off.
Setting Up TV Inputs
When You First Connect a Device
This TV's Easy ConnectTM Auto Input Sensing feature detects most connections automatically. When you first connect a device, the TV will:
a. detect the connected device and automatically switch to it
b. prompt you to identify the device type
c. prompt you to perform NetCommand set-up for the device
d. repeat these steps for any additional newly detected devices
The tables below state which connections trigger Auto Input Sensing.
Auto Detection Active INPUT video jacks COMPONENT video jacks
No Auto Detection ANT 1 and ANT 2
HDMI *
Digital Audio Out
AVR AUDIO OUTPUT, right (red) analog audio jack only
USB (USB photo port on side)
*
If the device is powered off when connected, detection occurs when the device is next powered on.
Note: For connection and setup of a personal computer, see the information later in this chapter.
2. TV Setup
15
Setting Up TV Inputs, continued
1. See chapter 3, "TV Connections," for recommendations on connecting your devices.
2. Connect your devices to the TV, making note of which TV input is used for each device. The TV and the devices can be either on or off when connecting.
First select a device type.
Next perform IR "learning."
Auto Input Sensing screen for most device types.
3. Power on the TV if not already on. When the TV detects a connection, the Auto Input Sensing screen opens.
· Most Device Types: Specify the device type and then, if desired, proceed directly to NetCommand setup.
a. In the Auto Input Sensing screen, press to move through the device list to select
the device type connected to the input. The device type you select here will appear in the Input Selection menu.
b. You can perform NetCommand IR "learning" now or at a later time. To perform now, highlight the Learn icon and press ENTER. See chapter 6, "NetCommand" for more.
· A/V Receiver: The TV can detect audio connections on the DIGITAL AUDIO OUTPUT jack and the right (red) analog AVR AUDIO OUTPUT jack.
Note for Analog A/V Receivers: When you disconnect an analog A/V receiver, be sure to change the Speakers setting manually to TV to hear sound from the TV speakers.
You can perform "learning" for the A/V receiver now or at a later time. To perform now, highlight the Learn icon in the Auto Output Sensing screen and press ENTER. See chapter 6, "NetCommand" for more.
· HDMI Devices Compatible with the TV's NetCommand for HDMI Feature: Compatible HDMI devices are often recognized automatically by the TV. The TV's remote control may operate some device functions without further setup. You can add more control functions if
desired. Program the TV's remote control or perform NetCommand IR "learning" to add functions.
4 Press EXIT to close the Auto Input Sensing screen. The TV will then display the Auto Input Sensing screen for the next connection it finds.
More About Auto Input Sensing
· Choose a different name for each input. · Antenna inputs (ANT 1/ANT 2) are never detected,
although you can turn off unused antenna inputs in the Inputs > Name menu. · You can change the device type at a later time using the Inputs > Name menu. Any "learned" NetCommand IR codes will be erased, however. · If you wish to reset an HDMI input: 1. Disconnect the HDMI device. 2. Turn off the HDMI input in the Inputs > Name
menu. 3. Connect the new device and the Auto Input
Sensing screen will display. If you want the device under NetCommand IR control, perform NetCommand "learning" for the new device.
Controlling A/V Receiver Sound Volume
Although the TV detects when you connect an A/V receiver, you must use one of the methods below to control sound volume from the A/V receiver.
With a Standard TV Setup · Recommended Method: Program the TV's remote
control for your A/V receiver and enable the Audio Lock feature. See Appendix D, "Programming the Remote Control." · Program the TV's remote control for your A/V receiver and set the TV remote's slide switch to the AUDIO position to control volume. Set the switch back to the TV position to control the TV. · Use the remote control that came with the A/V receiver.
With NetCommand Control of an A/V Receiver · Set up NetCommand control of the A/V receiver's
volume functions in the Inputs > AVR menu. The TV's remote will then automatically control A/V receiver volume. See chapter 6, "NetCommand." · Use any of the methods described for the standard TV setup.
16
2. TV Setup
Using a CableCARD
The CableCARDTM system allows your TV to receive, decode, and unscramble the premium digital channels included in your cable TV subscription without the use of a cable box. The system is unidirectional, meaning that certain digital cable services, such as requests for video-on-demand and pay-per-view programs, a cable operator's enhanced program guide, and dataenhanced television services may require use of a settop box instead. For more information, call your local cable operator.
Note:
CableCARD requires the TV's Fast Power On setting. If you insert a CableCARD, the TV will automatically override a Low Power setting and change to the Fast Power On setting.
Installing a CableCARD
1. Connect your primary incoming cable to ANT1/MAIN on the back of the TV.
"/5"69
0/-:'03 4&37*$&64&
*3&.*55&3
"/5."*/
64&8*5)$BCMF$"3%
%*(*5""6%*0 065165
"/5."*/ KBDLBUSFBSPG SFDFTTFEBSFB
Back of TV 2. Power on the TV. 3. Open the access door and insert the CableCARD
into the CableCARD slot with the top of the card oriented as shown in the diagram below.
Location of CableCARD access door
Orient the CableCARD as shown before
inserting it into the slot.
4. Wait a few moments while the CableCARD initializes. A message will display on screen when initialization is complete.
Displaying CableCARD Information
To display information needed by your service provider to start cable service, press MENU and when the Main menu appears, press 9 9 9.
In order to start cable service for this device, please contact your cable provider 1-800-xxx-xxxx CableCARD(tm): xxx-xxx-xxx-xxx-xxx-x Host: xxx-xxx-xxx-xxx-x Data: xxx-xxx-xxx-xx UnitAddress: xx-xxxxx-xxxxx-xxx
Press EXIT to exit.
Sample CableCARD information screen. Write down the information before contacting your cable provider.
CableCARD Menu
CableCARD menu
Network Setup CableCARD(tm) Status CableCARD(tm) Pairing Conditional Access
Sample CableCARD menu
To display the CableCARD menu with links to applications from your cable provider: 1. While watching CableCARD, press INPUT to open the
Input Selection menu. 2. With the CableCARD icon highlighted, press MENU to
open the CableCARD menu. 3. Press to highlight a link, then press ENTER to
access the linked page. 4. To redisplay the CableCARD menu, repeat steps 1
and 2. 5. Press EXIT to return to TV viewing.
If there are technical problems with the CableCARD, an error screen automatically displays with information that may be needed by your cable provider when you call them for assistance.
Moving Through Other CableCARD Screens In addition to CableCARD menus, other CableCARD application screens may display and require you to make additional selections. When using these screens on your Mitsubishi television: · Blue text denotes a function. Press ENTER to perform
the function. · You cannot move backward through the links. To
exit the CableCARD system, press EXIT. The CANCEL key may not work with some CableCARD screens.
Contact your cable provider if you have any problems with the application screen displays.
2. TV Setup
17
Using the TV with a Personal Computer
Connecting a Computer to the TV
Use one of the connection methods listed below based on your computer's video output.
Computer Video Output Digital DVI
HDMI
Video Connection
DVI-to-HDMI cable or an HDMI cable with an HDMI-toDVI adapter
Audio Connection
Stereo audio cables
Note: If the computer's audio output is a single mini jack, a mini audio-toRCA-male "Y" adapter cable is also required.
HDMI-to-HDMI cable
No additional audio connection is required.
57#BDL1BOFM
-
.0/0
3
3
$0.10/&/5 */1654
"73"70365
"6%*0065165
"%16%$7*0*%*/*17/6*5
57#BDL 1BOFM
-
.0/0
#"$,*/1651"/&-
CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
IMPORTANT This TV accepts digital computer signals only.
1. See the TV specifications in Appendix B to confirm that your computer signal is compatible with the TV.
2. Connect the computer's digital signal output to one of the TV's HDMI jacks. See the connection diagrams for the method suited to your equipment.
3. Connect the computer's audio output using one of these options: · For digital DVI signals, connect analog left/right audio to the TV's PC/DVI AUDIO INPUT jack. · For HDMI signals, no additional audio connection is required.
4. Power on the TV and computer. The TV will detect the connection and display the Auto Input Sensing screen.
5. In the Auto Input Sensing screen, press to highlight PC in the list of device types. You can change the type at a later time using the Inputs > Name menu.
6. Press EXIT to close the Auto Input Sensing screen.
4UFSFP "VEJP$BCMF
%$7BC*MUFP)N-%5.PE*FM
0OMZ
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
1FSTPOBM $PNQVUFSXJUI )%.*0VUQVU
DVI-to-HDMI connection with analog audio cables.
Above: Connection to the TV back panel. Below: Connection to the TV side panel.
57 4*%& 1"/&-
Pr
Pb
4UFSFP
"VEJP$BCMF
%7*UP
)%.*
$BCMF
1FSTPOBM$PNQVUFS XJUI%7*0VUQVU
57#BDL1BOFM
)%.*UP)%.*$BCMF
HDMI connection to TV Back Panel #2. An HDMI-toHDMI connection carries all video and audio on a single cable.
Note: If your computer provides digital audio output (coaxial or digital), you can connect it directly to a digital A/V receiver and bypass the TV.
18
2. TV Setup
Using the TV with a Personal Computer, continued
Computer Video Adjustments
1. Power on the computer if it is not already on.
2. Select PC from the Input Selection menu. To do
this, press INPUT to open the Input Selection menu, move the highlight to the PC icon, and press ENTER.
3. Working from the computer, change the resolution of the computer image. View the computer image on the TV and maximize the computer resolution
Tip:
Set the computer's screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on.
while maintaining a suitable aspect ratio for the
image.
4. Perform TV video adjustments.
Computer Display Formats
Press VIDEO repeatedly to access video-adjustment options. The following additional adjustments are
Press the FORMAT key repeatedly to cycle through the TV displays available for your computer's video signal.
available for computer video:
Computer Signal
As Displayed on TV Screen
Horiz Position (Horizontal Position). Manually adjust the horizontal position.
Vert Position (Vertical Position). Manually adjust the vertical position.
Original Format
VGA 640 X 480
4 X 3
16 X 9
Standard Standard
Zoom
5. Press FORMAT repeatedly to find the picture format best suited to the image. See the chart on this page showing how different computer resolutions are displayed on the TV.
WVGA 848 X 480
SVGA 800 X 600
Image Resolution
Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through 1920 x 1080 signals at a refresh rate of 60 Hz. The resolution of 1920 x 1080 is supported at refresh rates of 24, 30, and 60 Hz. See Appendix B in this book for more on compatible screen resolutions.
In most cases, the computer will select the best resolution match to display on the TV. You can override this setting if you wish. Refer to your computer operating system's instructions for information on changing the screen resolution.
You may need to restart the computer for changes to take effect.
WSVGA 1064 X 600
Format XGA 1024 X 768
PC 720p 1280 X 720
WXGA 1360 X 768
SXGA 1280 X 1024
Standard
Zoom
Format
PC 1080p 1920 X 1080
Standard
3 TV Connections
19
Before you Begin
Auto Input Sensing The TV's Auto Input Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See chapter 2, "TV Setup," for more on Auto Input Sensing.
Connection Types Review the connection types available on your input devices and use connections that will give the best video quality. For example, choose HDMI over component video, and choose component video over S-video or composite video.
Picture Quality For best picture quality, route video signals directly from the input device to the TV; avoid routing video signals through an A/V receiver, for example.
Cable Management
Pre-installed cable tie with rivet (attached to case at factory)
Cable Clamp with Rivet
Y
S-VIDEO
Pb
VIDEO
Pr R
L
AUDIO
L (MONO)
L (MONO)
AVR OUT
R
R
DVI IN
1
2
INPUT
1
2
COMPONENT INPUTS
R
L
(MONO)
Cable Tie with Rivet
Note: One cable clamp (round) and one cable tie (flat) are provided in the accessories bag.
Sound Quality
For best surround sound audio quality, route audio signals from the input device directly to your A/V receiver or sound system whenever possible.
IMPORTANT Accessory items such as cables, adapters, splitters, or combiners required for TV connections are not supplied with the TV. These items are available at many electronics stores.
One cable tie and one cable clamp are supplied loose and one cable tie is already attached (see illustration below). Use the clamp and ties to keep cables properly organized and connected. This is especially important if you need to swivel the TV on its stand. Use the clamp and ties as needed to control cables used in your set-up.
5PQ7JFX
¡
¡
'SPOU
The TV can be swiveled up to 30 degrees left or right.
IMPORTANT
Be sure there is enough slack in the cables below the cable clamps/ties to allow the TV to swivel freely. Without enough cable slack, there is risk of damaging the cables and the TV.
20
3. TV Connections
HDTV Cable Box or Satellite Receiver with Component Video
If your cable box or satellite receiver has an HDMI output, use the connections for HDMI devices described later in this chapter.
Required: RCA component video cables, left/right analog stereo audio cables.
1. Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. See your device's owner's guide for instructions and cable compatibility.
2. Connect RCA-type cables from the Y Pb Pr outputs on the HDTV cable box or satellite receiver to Component INPUTS on the TV back panel #1, matching the colored green, blue, and red connections.
3. Connect left (white) and right (red) audio cables from the HDTV cable box or satellite receiver to Component INPUTS L (MONO) and R on the TV back panel #1.
Note: To hear digital surround sound, connect the digital audio output from your cable box or satellite receiver directly to your digital A/V receiver.
$"#-&*/PS 4"5&--*5&*/
: 1C 1S
*ODPNJOHGSPN $BCMF4FSWJDFPS 4BUFMMJUF%JTI
57#BDL1BOFM
$BCMF#PY PS4BUFMMJUF
3FDFJWFS
"6%*0 -3
34
:
47*%&0
1C
7*%&0
"6%*0
-
.0/0
3
*/165
1S 3
-
-
.0/0
""67%3*"070036561655
3
$0.10/&/5 J**//11Q6655Q44J
3
-
.0/0
"%16%$7*0*%*/*17/6*5
Figure 1. Connecting an external HDTV receiver with component video connections
3. TV Connections
21
HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device)
Required: HDMI-to-HDMI cable. Connect an HDMI cable from the TV back panel #2 to the HDMI device output. HDMI devices provide video and audio through the single cable. Mitsubishi recommends you use category 2 HDMI cables to connect HDMI 1.3 source devices. Highspeed category 2 cables bring you the full benefits of Deep Color and x.v.Color. See chapter 1, "TV Overview," for more on HDMI cable types.
"/5."*/
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
Standard Cable Box, Satellite Receiver, or Other Device with S-Video
Required: S-Video cable and left/right analog stereo audio cables.
1. Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver.
2. Connect an S-Video cable from S-VIDEO OUT on the cable box or satellite receiver back panel to INPUT S-VIDEO on the TV back panel #1.
3. Connect left (white) and right (red) audio cables from AUDIO OUT on the cable box or satellite receiver to INPUT AUDIO L (MONO) and R on the TV back panel #1.
Note: Refer to the cable box or satellite receiver Owner's Guide for cable or dish antenna connections to the receiver.
57#BDL1BOFM
57#BDL1BOFM
)%.*%FWJDF
Figure 2. Connecting an HDMI device.
Note: HDMI inputs are
certified for proper
interoperability with other products certified by
SimplayTM.
IMPORTANT
HDMI and Audio Signals
· Digital Surround Sound: The TV's HDMI inputs can receive digital stereo audio signals only. To hear digital surround sound from an HDMI device, connect the device's digital audio output directly to your A/V receiver. See the Owner's Guides for those devices for instructions.
· A/V Receiver with HDMI. If your A/V receiver has an HDMI input, use the audio connections described in "A/V Receiver (Sound System)" instead.
34
:
47*%&0
7*%&0
-
.0/0
1C
1S 3
-
.0/0
""67%3*"070036561655
"6%*0
3
3
"%16%$7*0*%*/*17/6*5
*/165
$0.10/&/5 J**//11Q6655Q44J
3
-
.0/0
$"#-&*/PS
4"5&--*5&*/
*ODPNJOH $BCMFGSPN
8BMM
7*%&0065 "6%*0065
"OZ47JEFP%FWJDF
Figure 3. Connecting a device with S-Video
22
3. TV Connections
Direct Cable (no cable box)
(can be used with a CableCARDTM) You must connect the incoming cable for your primary viewing source to ANT 1/MAIN, especially for CableCARDTM use.
1. Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel.
2. For an optional secondary antenna source, connect an antenna (or cable) to ANT 2/AUX.
3. If you have subscribed to a CableCARD service, Insert the CableCARD into the CableCARD "/5"69 slot.
"/5."*/
Antenna with a Single Lead
A. For an antenna with flat twin leads Required: 300-ohm-to-75-ohm transformer. A1. For an antenna with flat twin leads, connect the
300-ohm twin leads to the 300-ohm-to-75-ohm transformer. A2. Push the 75-ohm side of the transformer onto ANT 1 on the TV back panel. B. For cable or antenna with coaxial lead Connect the coaxial lead directly to ANT 1 on the TV back panel.
"/5."*/
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
57#BDL1BOFM
Figure 4. Connection for direct cable service
Antennas with Separate UHF and VHF Leads
Required: UHF/VHF combiner
1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner.
2. Push the combiner onto ANT 1/MAIN on the TV back panel.
6)'"OUFOOB $IBOOFMT
"/5."*/
'MBU5XJO-FBE
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
7)'"OUFOOB $IBOOFMT
57#BDL1BOFM
&YUFSOBM "OUFOOB PS$BCMF
0INUP 0IN $PNCJOFS
6)'
7)'
5P"/5."*/
#BDL 7JFX 4JEF
7JFX
Figure 5. Connecting separate UHF and VHF Antennas
0IN 'MBU
5XJO-FBE
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
0IN $PBYJBM $BCMF
57#BDL1BOFM
#
"
" 0QUJPOBM0INUP0IN .BUDIJOH5SBOTGPSNFS
Figure 6. Connecting a Single Antenna Lead
Mitsubishi strongly recommends you avoid using antennas with flat twin leads. Flat twin lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.
3. TV Connections
23
DVD Player with Component Video
Component video cables and analog audio cables are required.
1. Connect the component video cables from Y Pb Pr VIDEO OUT on the back of the DVD player to the COMPONENT INPUTS jacks on the TV back panel #1, matching the green, blue, and red colored connections.
2. Connect left (white) and right (red) stereo audio cables from AUDIO OUT on the back of the DVD player to COMPONENT INPUTS L (MONO) and R on the TV back panel #1.
$0.10/&/57*%&0 : 1C 1S
"6%*0065 -3
%7%1MBZFS
57#BDL1BOFM
34
:
47*%&0
1C
7*%&0
"6%*0
-
.0/0
3
*/165
1S 3
-
-
.0/0
""67%3*"070036561655
3
$0.10/&/5 **//11665544
JQQJ
"%16%$7*0*%*/*17/6*5
3
-
.0/0
"/5."*/
Figure 7. Connecting a DVD player with component video
Note: To hear digital surround sound from your DVD player, connect the digital audio output from the DVD player directly to your digital A/V receiver.
DVI Video Device (Cable Box, Satellite Receiver, DVD Player, or Other Device)
Connect DVI devices (digital only) to the TV's HDMI input jacks.
Analog stereo audio cables and a DVI-to-HDMI cable or DVI/HDMI adapter and HDMI cable are required.
1. Connect the DVI-to-HDMI cable (recommended) or HDMI cable with DVI/HDMI adapter from the DVI device's back panel to the TV's HDMI jack.
Note: If you are using a DVI/HDMI adapter, it is important to connect the adapter to the DVI device for best performance.
2. Connect a set of audio cables from AUDIO OUT on the DVI device back panel to the PC/DVI AUDIO INPUT on the TV back panel. Connect the red cable to the R jack and the white cable to the L (MONO) jack.
Note: The HDMI connection supports copy protection (HDCP).
Some devices require connecting to an analog input first, in order to view on-screen menus and to select DVI as the ouput. Please review your equipment instructions for DVI connectivity and compatibility.
57#BDL1BOFM
-
.0/0
57#BDL1BOFM
3
3
$0.10/&/5 **//11665544
JQQJ
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
"73"70365 "6%*0065165
"%16%$7*0*%*/*17/6*5
-
.0/0
%7*UP)%.* $BCMF
IMPORTANT
See Appendix B for component video signal compatibility information.
For digital audio connections to your A/V receiver, see your DVD player and A/V receiver Owner's Guides.
%7*065 %7*%FWJDF
"6%*0065
-3
Figure 8. Connecting a digital DVI device
24
3. TV Connections
VCR to an Antenna or Wall Outlet Cable
Required: Two-way RF splitter, two coaxial cables, right and left analog audio cables, either S-video or video cable.
1. Connect the incoming cable or antenna to IN on the RF splitter.
2. Connect one coaxial cable from OUT on the RF splitter to ANTENNA IN on the VCR back panel.
3. Connect one coaxial cable from OUT on the RF splitter to ANT 1/MAIN on the TV back panel. This connection also allows you to use the TV Guide Daily feature.
4. To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT AUDIO L (MONO) and AUDIO RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable.
5. Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT VIDEO or S-VIDEO on the TV back panel. Connect only one type of video cable; S-Video is recommended, if available.
"/5."*/
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
57#BDL1BOFM
57#BDL1BOFM
34
:
47*%&0
1C
7*%&0
1S 3
-
"6%*0
-
.0/0
3
*/165
-
.0/0
3
3
$$00..1100//&&//55 J**//11Q6655Q44J
"73"70365 "6%*0065165
1$%7* "%6%7*0**/*1/65
-
.0/0
*/ 065 065
*/
065 "/5&//"
065 */ 47*%&0
065 */ 7*%&0
065 -3
*/ -.0/0 3 "6%*0
Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable
3. TV Connections
25
VCR to a Cable Box (Audio & Video)
Required: Two coaxial cables, right and left audio cables, S-Video or composite video cable, plus cables required to connect the TV to the cable box.
1. Connect the incoming coaxial cable to CABLE IN on the cable box.
2. Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel.
3. Connect the cable box outputs to the TV as shown in one of the options listed below. This connection allows the TV to receive the best available signal directly from the cable box. See the referenced figures in this chapter, "TV Connections."
Option 1 (see Figure 1: Component video output to the TV's COMPONENT INPUTS Y Pb Pr jacks; analog stereo audio to the associated AUDIO jacks.
OR
Option 2 (see Figure 2): HDMI output to the TV's HDMI jack.
OR
Option 3 (see Figure 3): S-Video output to the TV's INPUT S-VIDEO jack; analog stereo audio to the associated AUDIO jacks.
4. To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT AUDIO L (MONO) and AUDIO R on the TV back panel #1. If your VCR is mono (nonstereo), connect only the white (left) cable.
5. Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT VIDEO or INPUT S-VIDEO on the TV back panel #1. Connect only one type of video cable. S-Video is recommended, if available.
Note:
When using this connection configuration with the connections used in step 3, it is possible to view live cable programs through the VCR Device. For best picture quality, however, always view live cable programs directly from the cable box device.
57#BDL1BOFM
*ODPNJOH $BCMF
:
1C
1S
47*%&0
-
"6%*0
3
*/ $"#-&
065
34
:
47*%&0
1C
7*%&0
"6%*0
-
.0/0
3
*/165
1S 3
-
.0/0
3
3
$$00..1100//&&//55 J**//11Q6655Q44J
-
"73"70365 "6%*0065165
1$%7* "%6%7*0**/*1/65 .0/0
"UUBDIPOMZPOFUZQFPG
WJEFPDBCMF47JEFP
SFDPNNFOEFE
JGBWBJMBCMF
065
*/
-3
065 065 */ 47*%&0
065 */ 7*%&0
*/ -.0/0 3
"/5&//"
"6%*0
Figure 10. Connecting a VCR to a cable box
26
3. TV Connections
A/V Receiver (Sound System)
Most setups require either a digital audio cable or analog stereo audio cables.
The TV makes all audio available in digital and analog formats:
Analog audio coming into the TV is output in digital stereo format on the DIGITAL AUDIO OUTPUT jack (TV back panel #2).
Digital incoming audio is available as analog output on the AVR AUDIO OUTPUT, L and R jacks (TV back panel #1).
Usually, only one of the following connections is required:
· To connect an analog A/V receiver Connect left (white) and right (red) audio cables from AVR AUDIO OUTPUT, L and R on the TV back panel #1 to the TV AUDIO INPUT on the A/V receiver.
· To connect a digital A/V receiver with Dolby Digital surround sound and PCM audio support: Connect one end of the digital audio cable to DIGITAL AUDIO OUTPUT on the back of the TV (back panel #2). Connect the other end to the COAXIAL DIGITAL INPUT on the back of the A/V receiver.
%JHJUBM$PBYJBM$BCMF 6TFUPDPOOFDUB EJHJUBM"7SFDFJWFS
4UFSFP"OBMPH$BCMFT 6TFUPDPOOFDUBO BOBMPH"7SFDFJWFS
57#BDL1BOFM
Important A/V Receivers with HDMI Inputs
If your A/V receiver has an HDMI input, use one of the audio connections described here instead of an HDMI connection.
Note:
On rare occasions, an HDMI signal may be copy-restricted and cannot be output from the TV as a digital signal. To hear these copyprotected signals through the A/V receiver, use connections for analog A/V receivers.
Check the A/V receiver's Owner's Guide for information concerning use of the digital input and switching between digital sound and analog stereo sound from the TV.
Older Cable Box
Required: One coaxial cable.
Note:
This connection is not recommended. The other connections described in this chapter provide better quality audio and video to the TV and allow NetCommand to work with the cable box.
1. Connect the incoming cable to IN on cable box.
2. Connect one coaxial cable from OUT on the cable box to ANT 1/MAIN on the TV back panel.
"/5."*/
"/5."*/
"!#+).0540!.%, BELOWLABELWITHINRECESSEDAREA
ATTOP
34
:
47*%&0
1C
7*%&0
"6%*0
-
.0/0
3
*/165
1S 3
.0/0
3
3
$$00J**..//1111Q0066//55Q44&&//55J
-
""76%3*"070036561655
1$%7* "%6%7*0**/*1/65 .0/0
57#BDL1BOFM
Figure 11. Connecting the TV to an A/V receiver
"!#+).0540!.%, BELOWLABELWITHINRECESSEDAREA
ATTOP
57#BDL1BOFM
5P"/5."*/
$BCMF#PY 065
*/
Figure 12. Connecting an older cable box
Camcorder
Inputs on the side of the TV offer the most convenient way to connect a camcorder.
Jacks on the TV side panel offer the most convenient way to connect a camcorder
Composite Video Connection
Required: Analog stereo audio and composite video cables supplied with the camcorder. 1. Connect a composite video cable from VIDEO OUT
on the camcorder to INPUT 3/VIDEO or Y/VIDEO on the TV. 2. Connect left (white) and right (red) audio cables from AUDIO OUT on the camcorder to INPUT 3/ AUDIO L and AUDIO R on the TV.
574JEF1BOFM #PUUPN
1S 1C
3. TV Connections
27
Component Y Pb Pr Video Connection
Required: Analog stereo audio and component video cables supplied with the camcorder. 1. Connect component video cables from VIDEO OUT
on the camcorder to one of the TV's sets of COMPONENT INPUTS jacks (TV Back Panel #1 or TV Side Panel). 2. Connect left (white) and right (red) audio cables from AUDIO OUT on the camcorder to COMPONENT 3, L and R jacks on the TV side panel.
574JEF1BOFM #PUUPN
1S
1C
Figure 14. Component video connections for a camcorder
HDMI Connection
Required: HDMI cable supplied with the camcorder. Connect the camco5r7d4eJrEFto1tBhOeFMT#VP'UsUPHND
MI 4 jack on the side panel. 1S
Note: Three 1aCdditional HDMI inputs are located on Back Panel #2.
Figure 13. Composite video connections for a camcorder Figure 15. HDMI connection for a camcorder.
28
4 TV Operation and Features
Choosing a Viewing Source
Input Selection menu
Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu.
1. Press INPUT to display the Input Selection menu.
Note:
If there are only two inputs to the TV, INPUT switches between them without displaying the menu. The menu will display, however, if one of the two inputs is a CableCARD.
2. Highlight an input icon using
.
3. Press ENTER to switch to the input and close the menu.
More About the Input Selection Menu
· To assign meaningful names to the icons, see the Inputs > Name menu in chapter 5, "TV Menu Settings."
· To rearrange the icons, see the Inputs > Order menu in chapter 5, "TV Menu Settings."
Sleep Timer
The Sleep Timer turns the TV off after the length of time you set.
Setting the Sleep Timer 1. Press SLEEP on the remote control. An on-screen
status display will appear and show the number of minutes before automatic shut-off. 2. Press SLEEP additional times to increase the time in 30-minute increments up to the maximum of 120 minutes. 3. Press EXIT or wait five seconds without pressing any keys for the message to disappear. 4. Press SLEEP to view the time remaining before the sleep timer turns off the TV.
Cancelling the Sleep Timer 1. Press SLEEP to display the on-screen message. 2. Press SLEEP repeatedly until OFF is displayed.
Note: After five seconds of inactivity, the message box will disappear.
TV Tips
Turning the TV On or Off To turn the TV on or off, point the remote control at the front of the TV and press the POWER key. Alternatively, press the POWER button on the side panel of the TV.
Controlling Sound Volume Press VOL / to adjust the sound level. See also "Controlling A/V Receiver Sound Volume" in chapter 2, "TV Setup."
Changing Channels (antenna sources) To change channels: · Enter the channel number using the number keys
on the remote control and press ENTER. For a two-
part digital channel, such as 3-1, press 3 CAN--CEL 1 to enter a dash (separator).
· Press CH/PAGE / to change channels one channel at a time.
· Press and hold CH/PAGE / to scan quickly through channels.
· Press QV (QuickView) to switch back to the previously tuned channel.
· Press GUIDE to display ChannelView or TV Guide Daily channel listings, then highlight a channel and press ENTER.
· Use the Fav (Favorites) feature to set up lists of favorite channels and tune to them with the FAV key. See "Setup Menu" in chapter 5.
NOTE: Perform channel memorization to make finding channels easier. See the Setup > Scan menu.
4. TV Operation and Features
29
Remote Control
1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be operated by the remote control. Set the slide switch to TV for operation of the TV and NetCommandcontrolled devices. Control of additional devices requires programing (see Appendix D, "Programming the Remote Control."
3. SLEEP: Sets the TV to turn off within 2 hours.
4. Digits/Letters: Press digits for channel numbers, then press ENTER for faster tuning. Use numbers and the CAN--CEL key to enter digital sub-channel numbers. Use also for entering letters or names in menus.
To select letters when naming channels, repeatedly press the associated number key. Press ENTER to set the letter. Special characters are available with the 1 key (!, &, blank space) and 0 key (/, *, -). 5. --/CANCEL (SUB-Channel/CANCEL): When entering digital channel numbers, adds a separator between main and sub-channel numbers. Clears Fav and some menu entries.
6. QV (QuickViewTM): Switches between the current channel and the last channel viewed on ANT 1 or ANT 2.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used with this model.
9. FAV (Favorites): Scans through memorized lists of favorite channels. See "Setup Menu" in chapter 5, "TV Menu Settings," for more information.
10. VOL / (Volume Up/Down): Changes sound level.
11. CH/PAGE / (Channel or Page Up/Down): Scans up or down through memorized channels. Pages up and down through screens when used with the TV Guide Daily system or ChannelView .
12. FORMAT: Changes the shape and size of the TV picture.
13. LIST: Works like the LIST key for a cable box or satellite receiver when "learned" for NetCommand or when the remote has been programmed for the device.
14. INPUT: Displays the Input Selection menu from which you can select an input source to view, such as an antenna input (ANT 1/2) or a connected device.
15.
(Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: Displays or removes ChannelViewTM channel listing for ANT 1 and ANT 2, or TV Guide Daily listings if TV Guide Daily is enabled. Displays DVD disc or top menu for a NetCommand-controlled DVD player.
2
3
1
4
5
6
7
9
8
12
10
13
14 11
15
16
19
17
20
18
21
24 25 26
22
27 28 29
23
18. INFO: Displays an on-screen summary of the current device in use and any broadcast information available, including current V-Chip ratings information. See chapter 4, "TV Operation and Features," for details.
19. AUDIO: Selects individual audio settings to adjust.
20. VIDEO: Selects individual video settings to adjust.
21. MENU: Displays the main TV menu. When a submenu is open, backs up one menu level.
22. EXIT: Closes TV on-screen menus/displays.
30
4. TV Operation and Features
Remote Control, continued
23. F1F4 For devices under NetCommand control: Perform NetCommand "Learning" to assign your choice of functions to the F1F4 keys. For devices operating independently of NetCommand: The F1F4 keys work like the A, B, C, D keys on some cable boxes, satellite receivers, and DVD players. Program the remote control for your equipment and test the keys. See Appendix D, "Programming the Remote Control."
25. (Pause): Freezes a broadcast TV picture.
Record/Playback Keys
Use any of these methods to enable the recording and playback commands: · Program the remote control for your DVR, VCR, or
DVD player/recorder and set the slide switch to VCR, DVD, CABLE/SAT, or AUDIO as appropriate. · Perform NetCommand IR "learning" for the device. · Check HDMI devices for compatibility with the TV's NetCommand for HDMI feature. 24. (Record): Records with a VCR or DVR. 25. (Pause): Pauses a VCR, DVR, or DVD. See above for use during TV viewing. 26. (Stop): Stops play of a VCR, DVR, or DVD. 27. (Reverse): Rewinds a VCR. Reverse scans a DVR or DVD. 28. (Play): Plays a VCR, DVR, or DVD. 29. (Forward): Fast forwards a VCR. Forward scans a DVR or DVD.
Note: To operate other audio/video devices using the TV's remote control:
· See Appendix D, "Programming the Remote Control."
· See chapter 6, "NetCommand," for NetCommand IR "Learning" of device keys.
· For HDMI devices compatible with the TV's NetCommand for HDMI feature, see "NetCommand for HDMI Devices" on this page.
NetCommand for HDMI Devices
The TV's remote may operate some functions of compatible HDMI devices able to receive commands through the HDMI cable. Test your equipment with the TV's remote to find out which commands are supported. See below for commands that may be available, depending on the individual device. You can add commands using NetCommand IR "learning" after connecting and placing IR emitters for the devices.
Press PLAY on the device itself to:
· Turn on the TV if not already on · Switch to the device (no need to display the Input
Selection menu) · Begin play of the device
VCR, DVD, and DVR functions that may be available:
Record/
Menu
Playback Navigation
Channel Tuning
Other
CH /
Guide
Enter
Digits 09, CAN--CEL
CAN--CEL (to cancel)
ENTER
F1 (content) MENU
Resetting the Remote Control
If the slide switch is set to TV and the TV does not respond properly, reset the remote control. 1. Press and hold POWER for several seconds until the
key blinks twice and goes off. 2. Release the POWER key. 3. Press keys 0 0 9 3 5 and the POWER key will blink
twice when you finish entering the code. While entering the code, pause for a moment between each key press to ensure it is recognized.
Low-Battery Indicator
If you press a key and the POWER key blinks five times, replace the remote control's batteries.
Care of the Remote Control
· Use only alkaline batteries. · Be within 20 feet of the equipment. · Do not press two or more keys at the same time
unless instructed to do so. · Do not allow unit to get wet or become heated. · Avoid dropping on hard surfaces. · Do not use harsh chemicals to clean. Use only a
soft, lightly moistened cloth. · Do not mix old and new batteries.
4. TV Operation and Features
31
ChannelView Channel Listings
ChannelView screen
ChannelViewTM shows memorized channels on ANT 1 or ANT 2. It displays channel names and program information as sent by broadcasters or your local cable service provider and may be incomplete. No program information is displayed for analog channels. An analog channel name is displayed only if you assigned a name in the Setup > Edit menu.
· You can use either ChannelView or the TV Guide Daily system to see channel listings. ChannelView is accessible via the GUIDE key unless you activate the TV Guide Daily system. For details, see Appendix C.
· To receive ChannelView updates: - Keep the Energy Mode set to Fast Power On - Set the TV clock - Leave the TV powered off for a while each day to receive updates.
Note: Whenever you watch a digital channel, listings are updated for the channel you are watching.
Using ChannelView
Feature
Press Key
See ChannelView listings Press GUIDE. from ANT 1 or ANT 2.
Close ChannelView
Press GUIDE or EXIT.
Scan channels one by one. Press and hold or .
Scan channels quickly.
Press and hold PAGE / .
Jump to listings for a specific channel.
1. Enter the channel number (see numbers in upper left of screen).
2. Press ENTER.
See more of the program Press INFO. description (if available).
Move navigation to the program guide.
Press .
Move navigation to the channel guide.
Press .
Tune to the highlighted channel.
Press ENTER.
32
4. TV Operation and Features
Status Display
Press the INFO key to see the
on-screen status display.
5
The most common displays
are shown here. Seldom or never do all the status indi- 10
cators appear at the same time.
13
Ant 1 1
2
HD 16:9 Standard
TV-PG 9 Stereo
11
3
7-1 KABC-HD
6 Fav1 7 English 12
4
Monday Night Football
St. Louis vs. Tampa Bay
8 8
Tuesday 9:10 PM Sleep 30 min 14
On-screen status display sample information 15 MUTE
Signal Strength 16
Analog Sources 1. Source antenna or input 2. Analog channel being received (antenna sources only)
3. Analog channel name (if named in the Setup > Edit menu or provided by TV Guide Daily); antenna sources only.
4. Program name; displayed only if provided by TV Guide Daily.
5. Signal Type Being Received. Possible: On antenna sources or INPUT 13: 480i On component jacks: 480i, 480p, 720p, 1080i
6. Screen Format in use. Possible: Analog 480i /480p signals: Standard, Expand, Zoom, Stretch, Stretch Plus, Narrow 720p/1080i signals: Standard, Wide Expand
7. Current Fav bank number of channel (antenna sources only)
8. Program description (if supplied by TV Guide Daily); antenna sources only
9. V-Chip rating (antenna sources or INPUT 1--3 jacks only)
10. Audio Source. Possible: TV speakers, external sound system
11. Listen To indicator: Stereo, Stereo SAP, SAP (antenna sources only)
12. (Does not apply) 13. Day and time 14. Sleep Timer remaining time 15. Mute indicator 16. (Does not apply)
Digital Sources Source antenna or input Digital major and sub-channel numbers (antenna sources only) Digital Channel Name (if broadcast, provided by TV Guide Daily, or if named in the Setup menu > Edit options; antenna sources only) Program name (if broadcast or provided by TV Guide Daily; antenna sources only) Signal Type Being Received. Possible:
On antenna sources: SD 4:3, SD 16:9, HD 16:9 On HDMI: 480i, 480p, 720p, 1080i, 1080p, all PC resolutions Screen Format in Use. Possible: SD 4:3, 480i, or 480p: Standard, Expand, Zoom, Stretch, Stretch Plus, Narrow SD 16:9 or HD 16:9, 720p, or 1080i: Standard, Wide Expand 1080p: Standard Current Fav bank number of channel (antenna sources only) Program description (if broadcast or supplied by TV Guide Daily); antenna sources only V-Chip rating (antenna sources only)
Audio Source. Possible: TV speakers, external sound system
Stereo, Surround, Dual Mono (antenna sources only)
Current language (antenna sources only) Day and time Sleep Timer remaining time Mute indicator Signal strength indicator (antenna sources only)
Fav (Favorite Channels)
4. TV Operation and Features
Use the six Fav channel banks to store groups of your favorite channels from ANT 1 and ANT 2. You can set up a Fav channel bank for each of your favorite program types or set up a bank for each TV user.
You may prefer to perform Fav channel setup from a menu. See chapter 5, "TV Menu Settings," and the Setup > Edit options.
ANT-1
480i Stretch TV-PG Stereo SAP
4
Fav2
Channel and Fav numbers in the on-screen status display
33 FAV
Using Fav Channels
See the current Fav bank number Press INFO.
View channels in current Fav bank 1. Press the FAV key. Wait for the TV to tune to a channel in the current Fav bank.
2. Press the FAV key repeatedly to cycle through the channels available in the current Fav bank.
Change Fav banks
1. Press the FAV key. Wait for the TV to tune to a channel in the current Fav bank.
2. When tuning is complete and while the TV status display is still visible on screen, press the number key for the desired bank (16).
Note: Wait for the channel change to finish before pressing the number key. Otherwise, the TV may ignore the Fav number.
If no Fav banks are set up
The FAV key switches to the previously tuned channel; works like the QV key.
Fav Setup Using Only the Remote Control
Add Fav channels
1. While watching TV, tune to the channel you want to add to the current Fav memory bank. The default bank is Fav1. See the instructions above if you need to change to a different Fav bank.
2. Press and hold the FAV key for about 2 seconds. When Fav and the memory bank number appear under the channel number, the channel has been successfully added.
Remove Fav channels
This procedure removes the channel only from the selected bank and leaves the other banks unchanged.
1. While watching TV, press the FAV key.
2. While the TV status display is still visible on screen, press the number key for the memory bank.
3. Press the FAV key repeatedly until you see the desired channel in the onscreen status display.
4. While the channel number and Fav indicator (with correct bank number) are still displayed on the screen, press CANCEL. You must press CANCEL while the indicator is displayed. When the Fav indicator disappears after pressing CANCEL, the channel has been successfully removed.
34
4. TV Operation and Features
TV Signals and Display Formats
This is a 16:9 widescreen TV suitable for images available from HDTV and many DVDs. You can view olderstyle squarish images (4:3 aspect ratio) using one of the display formats described on this page. Press the FORMAT key to cycle through the available display formats. The TV remembers the format you last used for each device.
DVD Image Definitions
Image information may be stated on the DVD case. Some DVDs support both formats.
Anamorphic (or Enhanced for WideScreen TV) DVDs recorded to properly show widescreen images on 16:9 TV sets using the Standard format mode (recommended).
Non-Anamorphic (or 4:3, 1:33:1, Letter Box, or Full Screen) DVDs recorded for viewing on squarish TV screens. They may be full screen (4:3 or 1:33:1) which crops movies to fit the narrow TV, or letter box, which adds black top and bottom bars.
Signal Definitions
480i: Traditional interlaced signals from ANT-1 and ANT 2, INPUT 13, COMPONENT and HDMI jacks.
480p: Progressive-scan DVD signals on COMPONENT and HDMI jacks.
720p and 1080i: High-definition signals received through COMPONENT and HDMI jacks. These signals are always 16:9 (widescreen).
SD 4:3: Standard-definition squarish-screen-format signals from digital channels on ANT 1 and ANT 2.
SD 16:9: Standard-definition widescreen-format signals from digital channels on ANT 1 and ANT 2.
HD: High-definition 16:9 widescreen signals from digital channels on ANT 1 and ANT 2.
TV Display Format Definitions
Standard: This is the full-screen format used by HDTV signals. Use this format to display anamorphic DVDs with a 1.78:1 or 1.85:1 aspect ratio. Anamorphic DVDs with a 2.35:1 aspect ratio are displayed correctly but with top and bottom black bars. Narrow (4:3) images are stretched evenly from side to side. Available for all signals.
Expand: Enlarges the picture to fill the screen by cropping the top and bottom; useful for reducing the letter box top and bottom bars of non-anamorphic DVD images.
Zoom: Enlarges the picture to fill the screen by cropping the sides, top, and bottom; useful for removing or reducing the black top and bottom bars on anamorphic DVDs with a 2.35:1 aspect ratio.
Stretch: Stretches a narrow 4:3 image across the screen to display the entire image with less distortion than the Standard format.
Stretch Plus: Similar to Stretch, but minimizes distortion on the sides by expanding the picture to crop off portions of the top and bottom. Unless displaying a menu, press to adjust the vertical position of the picture.
Narrow: Displays narrow 4:3 images in their original shape. Adds black side bars to fill the screen.
Wide Expand: Enlarges the picture, cropping the image on both sides. Removes or reduces black side bars added to narrow images converted to 16:9 signals for digital broadcast.
Note: All high-definition channels send widescreen (16:9) signals, but not all such programming was created for this format. The broadcaster may stretch the image or add side bars to fill the widescreen area.
Original Signal
Standard
Expand
Zoom
Stretch
Stretch Plus
Narrow
Original Signal
Wide Expand
Non- Distorted. anamorphic Not recom-
or SD 4:3 mended.
Recommended for letterbox. See Note 1.
Anamorphic Recommended Distorted; not
DVD
recommended.
See Note 1.
Distorted. Not recommended. See Note 1.
Recommended for anamorphic 2.35:1 images. See Note 1.
Recommended for standard broadcasts. See Note 1.
Recommended for standard broadcasts. See Note 1.
See Note 1
SD 16:9 or HD Digital
(broadcast with side bars)
Recommended to remove side bars. See Note 2.
Distorted; not recommended. See Note 1.
Distorted; not recommended. See Note 1.
Distorted; not recommended. See Note 1.
Note 1 Available for 480i, 480p, and digital SD 4:3 signals only.
Note 2 Available for digital SD 16:9 and HD signals, 1080i, 720p; not available for 1080p signals.
TV Display Formats. Press the FORMAT key repeatedly to see different displays for the current program. Press the INFO key to see the name of the display format in use.
4. TV Operation and Features
35
Viewing Camera Files
JPEG Photos and the USB Photo Port
1. Connect your USB card reader or USB drive to the USB Photo port on the side of the TV.
The USB Photo menu displays while files are being read. Wait until you see the completion message on screen before continuing.
Note:
Some manufacturers' devices may be incompatible with the TV. If the TV is unable to display your photos, you can:
· Transfer files to a different USB device.
· Use the camera's composite video output as described later in this chapter.
USB Photo menu
2. Refer to the table below for use of the USB Photo menu after files have been read.
USB Photo Menu Options
Start slide show.
With the Slideshow icon highlighted, press or ENTER.
Activate menu options. Highlight an icon and press ENTER to: · start the slide show · display picture thumbnails · open the Media Setup submenu.
Display or close the Press MENU. Main menu.
Display status for the Press INFO. file source.
Select a different con- 1.
nected device
2.
3.
Press INPUT. Highlight the icon for a different device. Press ENTER.
Clear status display Press EXIT. or menu to show the USB Photo menu
JPEG Thumbnail Menu
Use these keys while viewing JPEG thumbnail images:
Keys for the JPEG Thumbnail Menu
Move the highlight from image to image.
FORMAT
Rotate the thumbnail clockwise in 90° increments
or ENTER
Play the slide show starting with the highlighted thumbnail.
Highlight the last thumbnail on the current page.
Highlight the first thumbnail on the current page.
CH/PAGE
/
Display the next or previous page of thumbnails.
EXIT
Close the Thumbnail menu and display
the USB Photo menu.
MENU
Close the Thumbnail menu and display
the Main menu.
INPUT
Close the Thumbnail menu and display
the Input Selection menu.
Notes on Viewing JPEG Files
· The TV ignores all commands while reading files. Wait for the completion message before continuing.
· Large files or high-capacity storage devices may take a long time to display. The screen will be blank while files are read.
· Use only one source device at a time.
IMPORTANT
Stop playback or change to a different TV input before disconnecting from the USB photo port.
36
4. TV Operation and Features
Slide Show Use these keys during the slide show:
Keys for JPEG Picture Slide Show Begin or resume slide show playback
or ENTER
Pause or resume playback while in automatic advance mode. Advance to the next slide.
Go to the previous slide.
FORMAT
INFO INPUT MENU
Rotate the slide clockwise in 90° increments.
Stop slide show and display the USB Photo menu.
Display status for the viewing device and current image.
Display the Input Selection menu.
Display or remove the TV Main menu.
Note: Always press (STOP) to stop slide show playback before disconnecting from the USB Photo port.
Media Setup Menu
Media Setup menu
In the Media Setup menu you can adjust the slide show display, number of repetitions, or display interval.
· Select either Auto or Manual advance. During manual operation, press or ENTER to advance to the next slide.
· For automatic advance, select the number of times (frequency) to play the complete slide show: Once, Twice, or Continuous.
· For automatic advance, select the time interval for display of each slide. The interval you select here is the minimum time between slides; actual time may be longer for larger files.
· Press EXIT to close the Media Setup menu and return to the USB Photo menu.
IMPORTANT The TV can read JPEG files as created by the camera. If you edit a picture file on a computer and resave the image, the TV may be unable to read the resaved file.
USB Photo Menu Compatible Picture Files
· Still images recorded on digital cameras using the Exchangeable Image File Format, version 2.1 (EXIF 2.1) standard for digital still cameras and Design Rules for Camera File Systems version 1.0 (DCF 1.0)
· Some images opened and resaved on a computer may not play back or may not display in the thumbnail list. This happens if the files were resaved in an incompatible format.
· Full path file names can be no longer than 50 characters and must end in a .jpg extension. Only the first 20 of the 50 characters will display.
· Images on storage devices with a capacity of over 256 MB can take a longer initial time to display.
Photos and Moving Video as Composite Video
Connect the camera to the TV using a composite video cable if: · You are unable to see images using the USB photo
port. · You wish to view moving video from the camera.
The TV's USB Photo menu will be unavailable and you must control the slide show through the camera. Display resolution is standard-definition (480i).
1. Refer to the owner's manual supplied with the camera for instructions needed for this setup.
2. Set the camera's output signal type to NTSC and put the camera into playback mode.
3. With the camera still turned on, connect your digital camera's composite video cable (usually yellow) to the INPUT 3 Y/VIDEO jack on the side of the TV. To hear audio, connect the camera's audio output cable to the INPUT 3 L-AUDIO jack.
4. When the Auto Input Sensing screen displays, press EXIT or assign the name Camcorder.
5. Press INPUT to display the Input Selection menu. 6. Highlight the icon for the camera input and press
ENTER. 7. If viewing photos, advance through the images
manually or set the camera to advance automatically.
$PNQPTJUF
Pr
7JEFP$BCMF
Pb
0QUJPOBM "VEJP$BCMF
Camera connectio.nPuEFsMin-5gacom0pOMoZsite video cable
5 TV Menu Settings
Main Menu
Press MENU on the remote control to open the Main menu. Icon Menu Name and Description
AV Menu
Customize picture and sound settings.
Captions Menu
Turn closed captions on and off; customize caption displays.
Setup Menu Inputs Menu Lock Menu
Perform basic TV setup. Set language, scan (memorize) channels, set the TV clock, edit channel options, lock TV use by channel, set Energy Mode, auto-on TV Timer.
Assign names to TV inputs, change icon order in the Input Selection menu, perform NetCommand IR "learning," set up TV Guide Daily.
Restrict TV use by program ratings and by time of day. Disable the side-panel control buttons. Set a pass code.
37 Main menu
Remote Control Keys for the TV Menu System
Key
1 MENU
5
2 exit
Function Display or close the Main menu or move back one menu level. Close all menus and return to TV viewing.
6
3 4
1
7
2
(Adjust Left/Right Keys) · Move through screens to select menu options.
3
· Change settings.
· Scroll through lists. (Adjust Up/Down Keys)
4 ENTER
Start an automatic function or check/uncheck a check box. When setting time, move from hour digits to minute digits and from month to day to year digits.
5 Numbers Letters
Enter channel numbers. Enter your ZIP code for the TV Guide Daily system. Enter letters for custom names in some text boxes.
6 CANCEL
· Clear a setting or stop an automatic function. · Add a separator in a digital channel number.
7 INFO
Get context-sensitive help.
38
5. TV Menu Settings
AV Menu
An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point.
AV Menu Options
AV menu for audio and video adjustments
Video
See the description of video adjustments later in this section.
Audio Reset PerfectColor
Global
See the description of audio adjustments later in this section.
· To reset audio and video adjustments for the current input, highlight the Reset icon and press ENTER.
· Reset has no effect on settings for Balance, Listen To, Language, and Film Mode.
PerfectColor Sliders Adjust the saturation (intensity) of six colors for the current image source.
PerfectTint Sliders Adjust six hues for the current image source
Highlight the PerfectColorTM icon and press ENTER to display the PerfectColor menu. Settings are retained in memory independently for each TV input.
· To switch between PerfectColorTM and PerfecTintTM, highlight Adjust Mode and press . · Press to move from one color bar to the next. · Press to change settings. · Press CANCEL to restore default settings. · Press MENU to return to the Main menu.
Video Noise
High, Medium, Low, Off
Reduce minor noise (graininess) in the picture. Use Low with good-quality signals. Use High with poor-quality signals. Use Off to leave the picture unaltered. Saved by input
Video Mute
On, Off
On displays a blue background when there is no signal on the current INPUT, COMPONENT, or HDMI jack.
Film Mode (for 480i and 1080i signals only)
Auto, Off
In Auto, the TV automatically detects and applies filmdecoding correction. Try the Off setting if images show many jagged edges. Saved by input.
SharpEdge
On, Off
Use SharpEdgeTM to add special edge enhancements to make the image appear sharper. Saved by input
Smooth 120hz Demo Off, On
Use On to see a demonstration of Smooth120HzTM processing.
Blue Glow
On if TV off, On if TV on, Off
Select Off to keep the decorative blue light turned off at all times; select one of the On options if you wish to see the blue light.
5. TV Menu Settings
39
Video Menu
Assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset to the defaults if you name or rename inputs afterwards.
To make video adjustments:
· From the Video menu:
1. Press to highlight an option.
2. Press
to display the submenu and adjust.
3. Press MENU to return to the AV menu.
· While watching TV: Press the VIDEO key repeatedly to display the video option you want to change. Press to change settings.
AV menu, Video options
Note: See chapter 2, "TV Setup," for additional adjustments available for images from a computer.
Video Menu Options
Picture Mode
Brilliant Game
Bright Natural
For use under strong light; not available when the device name is Game or PC.
Optimize picture/video processing for gaming consoles. Available only when the name of the input is Game or PC.
For most daytime viewing and x.v.Color sources
For most nighttime viewing and x.v.Color sources
Set the Picture Mode first before changing other video settings, as some are stored independently for each Picture Mode. Use Picture Modes to optimize the image for different conditions.
Contrast
· Adjust the white-to-black level · Low contrast shows a variety of shades in darker images · In most home lighting situations, medium contrast looks best. · High contrast shows darker images more uniformly black and makes colors appear more
vibrant. High contrast is good for brightly lit environments. · Settings are stored independently for each Picture Mode.
Brightness
· Adjust overall picture brightness · Settings are stored independently for each Picture Mode.
Color Tint Sharpness Color Temp
Deep Field Imager
Backlight
Adjust overall color intensity
Adjust the red-to-green ratio.
Adjust picture detail and clarity.
Adjust the white balance. Settings are stored independently for each Picture Mode.
High
Give white images a cool cast. May provide the most realistic picture under bright lighting.
Low
Give white images a warm cast. Natural/Color Temp at the low setting displays video at approximately the 6500K industry standard for NTSC pictures.
On
With DeepFieldTM Imager active, black levels are dynamically enhanced in portions
of the screen to provide strong contrast with detail over mixed screen content.
Off
Contrast is adjusted uniformly across the entire screen.
Demo
Display a split picture to show on (right side) or off (left side).
Adjust peak brightness of the backlight. Factory default is maximum brightness.
40
5. TV Menu Settings
Audio Menu
To make audio adjustments:
· From the Audio menu:
1. Press to highlight an option
2. Press
to display the submenu and adjust.
3. Press MENU to return to the AV menu.
· While watching TV: Press the AUDIO key repeatedly
to display the audio option you want to change.
Press
to change settings.
AV menu, Audio options
Audio Menu Options
Speakers
The Speakers option displays only if an A/V receiver connection has been detected.
TV
Turn on the internal TV speakers.
AV Receiver Turn off the TV speakers and hear sound only from a connected A/V receiver.
Bass
Control volume level of low-pitched sound from the TV speakers.
Treble
Control volume level of high-pitched sound from the TV speakers.
Balance
Control audio balance between the right and left TV speakers
Surround
Off
No surround effects from the TV speakers (default)
Simulated Stereo
Create a simulated stereo effect through the TV speakers when watching a monaural (non-stereo) program.
Surround Sound
Create a simulated surround effect through the TV speakers when watching a stereo program.
Listen To
(analog channels from ANT1/ANT2 only)
Stereo
SAP (Second Audio Program)
Default setting. The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word Stereo is displayed when you tune to a channel broadcasting in stereo.
Select an additional monaural sound track not audible during normal TV viewing. The SAP signal might be related to the program (such as a sound track in a foreign language), or it might be unrelated (such as a weather report). If an SAP signal is broadcast, the letters SAP are displayed when you tune to the channel
Mono
Reduce background noise. Use when receiving a weak stereo audio signal. All audio is played as mono with this setting.
Language
(digital channels from ANT1/ANT2 only)
English French German Italian Portuguese Spanish Other
Select the current language for a digital program from an ANT input. Each digital program may include up to seven language choices or no choice at all.
Level Sound On, Off
Reduce differences in sound volume between programming segments, such as the difference between regular broadcast programs and commercial segments.
5. TV Menu Settings
41
Captions Menu
Captions on Analog Channels
The TV can decode captions from ANT 1/ANT 2 and the INPUT 13 jacks. Broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the program and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen.
IMPORTANT · Analog text-service options display a large
black or gray box on the screen when no signal is being broadcast. · The content of captions is determined by the broadcaster. If captions show strange characters, misspellings, or odd grammar, it is not a malfunction of the TV. · Closed caption signals are not available through HDMI or component jacks. See the menus for these devices for closed-caption decoding.
Captions on Digital Channels
The TV can decode captions from ANT 1/ANT 2 devices only. Broadcasters can send up to six different captioning selections or can send analog captions that match those sent by the analog station. A TV station may broadcast only one or two types of captions or none at all.
Digital Settings menu. Check the caption test area (upper right) to see how custom settings look.
Captions Menu Options
Closed Captions
Analog Captions
On if Mute CC 1CC 4 Text 1Text 4 Off
· On if Mute: Display analog closed captions signal CC 1 when audio from the TV speakers is muted. When watching TV, press MUTE to turn captions on/off.
· CC 1CC 4: Standard closed-caption signals · Text 1Text 4: Text-service signals
Analog Background
Gray, Black
Select either a gray or black text background to make analog closed captions easier to read.
Digital Captions
On if Mute Caption 1 Caption 6 Off
· On if Mute: Display digital closed caption signal Caption 1 when audio from the TV speakers is muted. When watching TV, press MUTE to turn closed captions on/off.
· Caption 1Caption 6: Caption signals sent by the broadcaster
Font
Digital Settings
Font Size
Default Font 1Font 7
Default changes settings to those selected by the captions provider, or, if none, to the TV's own caption defaults. Use Fonts 1 through 7 to give captions a custom appearance.
Large Standard Small
Large is the recommended size.
Font Color Font Opacity
Background Color Background Opacity
White, Black, Magenta, etc. Translucent, Opaque, Flashing, Transparent White, Black, Magenta, etc.
Translucent, Opaque, Flashing, Transparent
Guidelines for setting digital captions:
· Use contrasting colors for captions and background.
· Check readability of captions using the sample text in the upper right corner of the menu.
· A white font on a black translucent background makes an easy-to-read combination.
42
5. TV Menu Settings
Setup Menu
Use the Setup menu to:
· Select English or Spanish for menus and on-screen text.
· Scan the channels available from the antenna or cable service connected to the ANT 1 or ANT 2 jacks.
· Edit channel options, including channel locking.
· Set the TV's internal clock.
· Set the TV Timer to turn on the TV automatically at a designated time.
· Set the energy mode for power consumption when the TV is powered off.
Setup menu, Scan option
Setup Menu Options
English Spanish
Language
Scan
Ant-1 Air Ant-1 Cable Ant-2 Air Ant-2 Cable
Display on-screen menus in either English or Spanish.
Note: To listen to audio in other languages (when available), see the section on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog signal) or Language (digital signal).
Scan memorizes broadcast channels to make them easier to find. To start channel memorization: 1. Highlight one of the input selections based on your connection to ANT 1
or ANT 2: · Air when connected to an indoor or outdoor antenna. · Cable when connected to direct cable (no cable box) 2. Press to highlight START. 3. Press ENTER to start channel memorization for the selected input.
Notes on Scan and channel memorization:
· Channel memorization may take up to 15 minutes to complete.
· To stop channel memorization before completion, press CANCEL.
· When watching TV, press CH memorized channels.
to move through
· If you restart memorization, previously memorized channels for the selected input will be erased.
· If using TV Guide Daily, the channels displayed and their order are independent of the TV's channel memorization. Refer to Appendix C for more information.
· If using a CableCARD, the complete list of available channels is provided through the CableCARD. There is no need to perform channel memorization for ANT 1 CableCARD service unless you wish to clear channels from memory and reacquire the channel list from the service provider.
· To add a digital channel that does not appear in the Edit menu without repeating channel memorization:
1. Look up the physical channel number for the new digital channel. The website www.antennaweb.org can help you find the physical channel number.
2. Tune to any channel on the Ant 1 or Ant 2 input your antenna is connected to.
3. Use the number keys and CAN--CEL to enter the physical channel number followed by "-1" and ENTER. For example, for physical channel 36, press 3 6 CAN--CEL 1 ENTER.
The TV will search for a digital channel on the channel 36 frequency. When it finds the channel, it will:
a. Add the channel to memory. b. Change the channel number to the virtual
channel number sent by the broadcaster. c. Add any associated sub-channels to
memory.
5. TV Menu Settings
43
Setup Menu, continued
Edit
Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may associate digital channel 2-1 with their analog channel 2.
Physical Digital Channel Number. The channel number officially assigned to the actual broadcast frequency; shown on screen in parentheses.
Setup menu, Edit channel options
Setup Menu Options
Use the Edit menu to edit channel options when ANT 1 or ANT 2 is the current source. To highlight a channel number to edit:
· Press CH / to jump to the next page of channel numbers. Press and hold CH / to speed
Edit
through pages.
· Press to move through all channel numbers, one at a time. Press and hold to speed
through channel numbers.
The TV tunes to the highlighted channel on release of CH / or .
Channel
Channels marked with a check are in memory. To add or delete a channel from memory, highlight the channel number and press ENTER. To add a single digital channel not in the list, see the notes under Scan.
Digital channels are listed by virtual channel number with the physical channel number shown in parentheses.
Name
Assign a custom name up to six characters long to memorized channels. You can name analog channels and digital channels if broadcast without pre-assigned names.
1. With the cursor in the Name field, press a number key repeatedly to cycle through the characters associated with the key, including !, &, blank (1 key) and /, *, - (0 key).
2. Press ENTER to set the letter and move to the next letter position. To delete the current character and move back one position, press CANCEL.
Note: When the TV Guide Daily system is enabled, the name displayed is the name provided by TV Guide Daily instead of the name you assign here.
Fav1Fav6
Use the six Fav channel banks to store groups of your favorite channels. For example, you can set up a Fav channel bank for each of your favorite program types (e.g., sports, news, children's programs) or set up a bank for each TV user.
· Use
to move the highlight through the Fav area of the screen.
· Press ENTER to insert a check mark to add the highlighted channel to one of the Fav
banks.
· The same channel can be added to multiple Fav banks
· To remove a channel from a Fav bank, highlight the check mark and press Enter.
Note: To set up Fav channel banks without using this menu, see chapter 4, "TV Operation and Features."
Lock
Lock channels so that a pass code is required to view them. When you rememorize channels, all lock settings are cleared.
Highlight the Lock column and enter a pass code when prompted. If you previously set a pass code to open the main Lock menu, use the same pass code. See the description of the Main menu > Lock for more on pass codes. · Press ENTER to insert a check mark to lock the highlighted channel. · To unlock a channel, highlight the check mark and press Enter.
44
5. TV Menu Settings
Setup Menu, continued
Clock Use either the manual or auto method to set the clock. Set the clock if you wish to: · Use the TV's Timer function. · Maintain accurate ChannelView listings.
Setup menu, Clock options
Setup Menu Options Settings
Clock
Manual. To set the clock manually:
1. Select Manual. 2 Set the time of day. 3. Set the date. 4. Select your time zone. 5. Select either Applies or Ignore for Daylight Savings Time.
Note: If using Manual, each time the time change occurs, you must open this menu and set the TV's clock ahead or back.
Auto. To set the clock automatically:
1. Select Auto. 2. Select your time zone. 3. Select either Applies or Ignore for Daylight Savings Time. 4. After exiting the menus, tune the TV to a station carrying XDS data, typically
an analog PBS station.
Note: · With the Auto setting, the TV's clock adjusts automatically to daylight savings time. · The TV's clock will be reset if you tune to a channel sending incorrect time
data. To prevent unwanted clock resets, first use the Auto method to set the clock from a channel sending the correct time, then change the method to Manual.
Time (Manual option only)
1. With the hour highlighted, press repeatedly to change the hour and the AM/PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to set the hour. 3. With the minutes highlighted, press to change the minutes. Press and
hold to change the minutes display quickly.
Date (Manual option only)
1 With the month highlighted, press 2. With the day highlighted, press 3. With the year highlighted, press
to select. Press ENTER to set. to select. Press ENTER to set. to select the current year.
Time Zone
Daylight Savings Time
Eastern, Central, Mountain, Pacific, etc.
Required for both the Manual and Auto methods.
Applies Ignore
Required for both the Manual and Auto methods. Select the option for your area.
5. TV Menu Settings
45
Setup Menu, continued
Timer
Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel.
· The TV clock must be set before you can use the Timer feature.
· After the Timer turns on the TV, press any key on the remote control to keep it on. Otherwise, the TV will turn off after five minutes.
· The POWER indicator flashes slowly while the TV is off to indicate the TV Timer has been set.
Setup menu, Timer options
Setup Menu Options
Timer
On, Off
Day Timer
Daily, Mon-Fri, (every) Sunday, (every) Monday, (every) Tuesday, etc. Select the day or days of the week for the Timer to turn on the TV.
Time
To set the time for the TV to come on:
1. With the hour highlighted, press
repeatedly to change the hour and the AM/
PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to highlight the minutes.
3. Press to change the minutes. Press and hold to change the minutes display quickly.
Input
Ant-1, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined and enabled inputs that appear in the Input Selection menu.
Channel If the input is an antenna (ANT 1, ANT 2), press repeatedly or press and hold to scroll quickly through the available channel numbers.
Use the Energy Mode option to select the level of power consumption while the TV is turned off.
Energy
Energy Mode
Fast Power On Low Power
The default setting.
Uses less energy, but TV power-on takes longer (about 60 seconds) and some TV features may be unavailable. Note: When the TV is first powered off, it remains in Fast Power On mode for 30 seconds before switching to Low Power mode. During that time, the TV will turn on without the Low Power 60-second delay.
Keep this setting at Fast Power On if you need to:
· Have faster power on. · Receive updates to ChannelView channel listings. · Receive updates to the TV Guide Daily program listings. · Keep the TV Clock accurate for the TV Timer. With the Low Power setting, you must reset the
TV Clock if the TV is left turned off for over 48 hours. · Activate the Side Panel Lock.
Note: TV Guide Daily and CableCARDTM require the Fast Power On setting. If you activate TV Guide Daily or use a CableCARD, the TV will automatically override a Low Power setting and change to the Fast Power On setting.
46
5. TV Menu Settings
Inputs Menu
Note:
When you change an input name in the Name menu and then exit the Name menu:
The name is changed The icon in the Input Selection menu is changed Audio and video settings are changed to the defaults for the new device type. All NetCommand "learning" for the input is also erased.
Change input names using the Inputs > Name menu.
Inputs Menu Options
Name
Cable Box, Camcorder, DVD, DVD2, DVR, Game, HD Disc, Satellite, VCR, PC
On/Off (Ant 1 and 2 only)
Off (HDMI only)
· Assign or change names of inputs appearing in the Input Selection menu.
· Turn Ant-1 and Ant-2 On or Off. · Turn unused HDMI inputs Off. · Press to move between inputs. · Press to select a name. · If you change the name of an input after performing NetCommand
"learning," the IR codes you "learned" are erased.
Note: When you disconnect an HDMI device, the icon remains in the Input Selection menu until you remove it. To remove an unwanted HDMI icon, select Off for the HDMI input.
Order
Put frequently used icons at the start of the Input Selection menu.
1. Press
to highlight the icon to move.
2. Press ENTER to confirm the selection.
3. Press
to drag the icon to the desired position.
4. Press ENTER to set the new position.
Learn
· Perform initial set-up of NetCommand control of a device. · Add or remove individual keys from NetCommand control of a device.
See detailed instructions in chapter 6, "NetCommand."
AVR
Set up NetCommand control of an A/V receiver. This set-up allows you to: · Operate the A/V receiver's power and volume functions with the TV's remote control. · Make the A/V receiver switch automatically to the correct audio input when you select a
device in the TV's Input Selection menu.
See detailed instructions in chapter 6, "NetCommand."
Guide
Guide Devices Zip Code
On/Off Ant-1, Ant-2 [5-digit ZIP code]
Enable/disable or set up TV Guide Daily. See instructions on the following page.
Inputs Menu, continued
Setting Up TV Guide Daily
Setup of the TV Guide Daily system is optional. 1. Display the Inputs > Guide menu to display TV
Guide Daily setup options. 2. To enable the TV Guide Daily system, highlight On.
If you wish to disable the system, highlight Off.
Inputs > Guide menu for TV Guide Daily setup
3. Select program sources for the listings. You can select one over-the-air source and one direct cable source for TV Guide Daily. If, however, you have multiple cable sources, the channel-number assignments may not match up correctly. See the following table and notes for the preferred connection combinations.
If One Source Is:
Ant-1 Channels via Cable Ant-2 Channels via Cable
The Other Source Can Be: Ant-1 Air Ant-2 Air N/A N/A
Note: -
-
Inputs to TV Guide Daily can include only one over-the-air source and only one direct cable source. TV Guide Daily listings can be downloaded from an over-the-air antenna or direct cable connected to ANT 1 or ANT 2.
4. Move to the ZIP Code digits and enter the five-digit ZIP code for your location. To receive the correct program listings for your area, you must enter the ZIP code.
Using TV Guide Daily
· With the Guide set up and enabled, use the TV remote control's GUIDE key to launch the TV Guide Daily system.
· See Appendix C for detailed information about the Guide.
5. TV Menu Settings
47
IMPORTANT
· Operation of TV Guide Daily requires overthe-air or direct cable (no cable box) access to stations carrying TV Guide Daily program listings.
If listings are not available in your area or become discontinued by the local provider, TV Guide Daily will not operate. TV Guide Daily does not provide program listings for satellite TV systems.
· TV Guide Daily listings will NOT be available if:
- TV Guide Daily is not set up as described in this section.
- No ZIP code is entered in the Inputs > Guide menu (setting remains at 00000).
- No antenna is selected in the Inputs > Guide menu.
· The TV must be powered off for a while each day to allow new listings to download.
· After initial setup, it may take up to 24 hours to receive program listings.
· After the initial listings download is complete, if there is more than one channel lineup available in your area, a lineup selection screen will be displayed the next time you press GUIDE. Follow the on-screen instructions to choose a lineup.
· If TV Guide Daily is turned off, the source selection (antenna) settings and ZIP code will be cleared. If the Guide is turned back on, you will need to re-enter the ZIP code and reselect the antenna source(s). When the Guide is turned off for a period of time and then turned on, it may take up to 24 hours to receive current program listings.
48
5. TV Menu Settings
Lock Menu
TV locks available from the Lock menu are:
Parent Other
Lock by Ratings
Restrict access to programming based on V-Chip rating signals sent by the broadcaster.
Time
Side Panel
Lock by Time Restrict TV use by time of day.
Lock Side Panel Disable the controls on the side panel of the TV. Use this option if small children in the home try to press the control buttons.
Note:
Channel Lock is an additional lock that blocks access to specific channels. Channel Lock is available under the Setup menu (Setup > Edit > Lock).
Pass Codes
Setting a Pass Code
You are prompted to enter a pass code whenever you select Lock on the Main menu. To set a pass code for the first time:
1. Press MENU, highlight Lock, then press . A screen prompting you for a pass code will display.
2. Input a four-digit pass code using the number keys on the remote control. · Press CANCEL to delete a number and move back one space. · Press MENU or EXIT to close the menu without setting a pass code.
3. Press ENTER to set the pass code.
Resetting a Pass Code
See the procedure in Appendix A.
Important Notes on Rating Locks
· Parent menu rating locks apply only to channels and signals received on ANT 1, ANT 2, and the INPUT 13 jacks.
· Other menu rating locks apply only to digital channels received on ANT 1 or ANT 2.
· When viewing a cable box, satellite receiver, or other device connected to the COMPONENT or HDMI inputs, check the device's menu for rating locks.
The Lock > Parent menu lets you set parental controls using V-Chip technology.
Parent Menu
The TV comes from the factory with the rating locks turned off and with pre-set U.S. ratings TV-PG and movie rating PG. Turn on blocking for U.S. ratings to activate these rating restrictions. Use the Lock > Parent menu to change the level of blocking with U.S. ratings.
Any time you change the channel or device, it may take up to five seconds for the rating restrictions to take effect.
Other Menu (Alternate Rating System)
This TV can recognize new rating systems that may come into effect in the future. The Other menu allows you to block digital programming when such systems come into effect.
The first time you tune to a channel broadcasting an alternate rating system, the TV defaults to the most restrictive setting if the Lock menu > Other Lock option is set to On. Use this menu to change the allowed rating if you are unable to watch a program broadcast with an alternate system.
Bypassing TV Locks
If you try to watch a blocked program or channel or try to use the TV while it is locked by time, a notice appears prompting you for a pass code. To use the TV: · Input your four-digit pass code and press ENTER. · Change to a channel airing an allowed program or
change to another device.
To reactivate the parent ratings lock or TV Lock by Time after using the pass code: · Power the TV off and then on to reactivate both
locks. · Change to a different channel or device to reacti-
vate only the parent ratings lock.
Lock Menu, continued
5. TV Menu Settings
49
Parent Menu Options (U.S.-based rating system)
Option Name and Description
Lock
Off, On
Disables or enables program blocking based on V-Chip signals and the U.S. rating system.
TV Rating
TV-Y TV-Y7 TV-G TV-PG
TV-14 TV-MA
Youth. For children under 7. Youth 7 and older. General Audience. For the entire family. Parental Guidance. Parental Guidance recommended; may not be suitable for some children. Adolescent 14 and older. Not recommended for children under 14. Mature Audience. For adults only.
Highlight the rating level you wish to change and press ENTER to block it ( ) or allow it ( ).
You can apply supplemental content blocking to the age-based ratings by using the TV content categories listed below.
FV
Fantasy Violence. Applies to TV-Y7 only.
D
Sexual Dialog. Applies in differing degrees to TV-PG and TV-14.
L
Adult Language. Applies in differing degrees to TV-PG, TV-14, and TV-MA.
S
Sexual Situations. Applies in differing degrees to TV-PG, TV-14, and TV-MA.
TV Content Categories
V
Violence (graphic or realistic). Applies in differing degrees to TV-PG,
TV-14, and TV-MA.
Movie G Rating
PG
General Audience. Designed for the entire family to view. Parental Guidance. Parental Guidance is recommended, may not be suitable for some children.
PG-13
Parental Guidance, 13 and Older. Not recommended for children under the age of 13.
R
Restricted. Restricted in theaters to 17 years old and older unless accompanied by an adult.
NC-17
No Children 17 or Under. Restricted in theaters to 18 years old and older.
X
Adult. Designed for and restricted in theaters to adult audiences only.
Not Rated The program has not been assigned an MPAA rating.
Start Time
Stop Time
Allows you to set the time of day for enforcement of rating restrictions set in the Parent menu.
1. Highlight the hour digits for Start Time. 2. Press repeatedly to change the hour and associated AM/PM indicator. You can also just press
and hold to move quickly through the numbers. 3. Press ENTER to highlight the minutes. 4. With the minutes digits highlighted, press repeatedly to change the minutes. You can also just
press and hold to move quickly through the numbers. 5. Highlight the Stop Time digits and set the time as described above.
Note: To make rating restrictions active 24 hours a day, make Start Time and Stop Time the same.
50
5. TV Menu Settings
Lock Menu, continued
Other Menu Options (alternate rating system)
This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply to digital programming only.
Option Name and Description
Lock
On, Off
Enable or disable program blocking.
System Name The rating system available for the channel
Group
Rating groups available in the rating system shown on the screen. Rating groups are defined by the rating system in effect.
Rating
Rating restrictions available in the selected rating system and group. Highlight the rating and press ENTER to check (block) or uncheck (allow) rated content.
Time
Block all use of the TV during the time period you specify. You must enter a pass code to use the TV when the time lock is in effect.
Lock by Time On, Off
Enable or disable Lock by Time.
Lock Time, Unlock Time
To set the lock and unlock times: 1. Highlight the hour digits for the Lock Time. 2. Press repeatedly to change the hour and associated AM/PM indicator. To move quickly
through the numbers, just press and hold. 3. Press ENTER to set the hour and highlight the minutes. 4. With the minutes highlighted, press repeatedly to change the minutes. To move quickly
through the numbers, just press and hold. 5. Highlight the Unlock Time digits and set the time as described above.
Note: To make Lock by Time active 24 hours a day, make Start Time and Stop Time the same.
Side Panel
On, Off
On locks and Off unlocks the controls on the side of the TV. Use this option if small children may try to press TV control buttons.
Note: Side Panel Lock is available only when the TV is in Fast Power On Energy Mode (See Setup > Energy). If you lock the side panel and then change to Low Power Energy Mode, the TV will automatically release the lock.
To release the lock without the remote control, do one of the following: · If the TV is on, press and hold the MENU button on the side panel for over eight seconds. A
message will display to confirm release of the Side Panel Lock. · If the TV is off, press and hold the MENU button on the side panel for over eight seconds. The
TV will power on and release the lock.
6 NetCommand
51
About NetCommand
· The IR "Learning" feature of NetCommand allows the TV to determine the IR control signals for your A/V devices.
· NetCommand setup is optional.
· You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.
· NetCommand operates by sending remote control signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels, or perform other functions. All this is accomplished with the TV's remote control and the slide switch left in the TV position.
· You can choose the level of NetCommand control for your home theater. Standard Setup. Perform a standard setup if you want NetCommand to control A/V devices, such as the TV, a playback device (like a DVD player), and a cable box. With this setup, you can use the TV's remote control to operate these devices.
A/V Receiver Setup. Perform A/V receiver setup if you want NetCommand to:
Control a surround sound A/V receiver. Automatically change audio input selections on an A/V receiver when you change inputs on the TV.
Important Note on NetCommand Be sure to connect the IR emitter cable to the TV and properly place the emitters so that NetCommand can control your devices. See the explanation on the following page.
52
6. NetCommand
IR Emitter Placement
The remote control sensor is somewhere
between these two positions. This is usually
An IR emitter cable is included with the TV. The NetCommand system uses emitters
connected
to
*OGSPOUPGBTJOeHnMoFu gh BWFSBHFTJ[FEtEeFrsW.JDF
accuracy
for
placement
*3TFOTPS
of
the
IR
emit-
the IR EMITTER jack to control other devices such as
In some cases, the emitter works better facing
DVD players, cable boxes, satellite receivers, and VCRs.
downward from the top of the device. Experi-
1. Connect the plug end of the supplied IR emitter
*3*3mTFTeOFnTOPTtSPtSo find w0hOatUPwQoPrkGsBbTeJsOtH. MFUBMM
cable to the IR EMITTER NetCommand® jack on the
4. Secure the emitteErFeWnJdDsF in place using double-
TV back panel.
sided tape.
2. Run the cable for each of the emitter ends under,
5. Place any unused ends behind the devices to
alongside, or over each device to be controlled so *OGSPOU
TIpBrSeFvEeCntZsUtXraPy signals from r*3eaTcFOhTinPSg the IR sensors.
that the emitter end is in front of the area where theBWFSBHFTJ[FEEFWJDFT
remote control sensor is located.
*3TFOTPS
"/5."*/
3. Position the emitter end with the emitter bulb facing
the remote control sensor. The bulb emits infrared
SPOUPGB light in a cone-shaped pattern. Place the bulb far HMFBWFSBHFenough from the sensor to allow the cone pattern FEEFWJDF to reach the sensor.
0UIFS"7EFWJDF
#"$,*/1651"/&- CFMPXMBCFMXJUIJOSFDFTTFE BSFBBUUPQ
The IR sensor is usually behind the plastic window
of the front display panel. It is sometimes visible
with the aid of a flashlight and is normally a round
PS
or square cutout behind the plastic.
If you cannot see the sensor and the device's
Owner's Guide does not specify the location, you
can find it by following these steps using the device's remote control:
a. Hold the device's remote about one-half inch
4 $)
% * ( * 5" 463306/%
"73FDFJWFS
57#BDL1BOFM
from the front of the device. Starting from one
end of the display window plastic, press the POWER key.
Connecting IR Emitter NetCommand
b. If the device does not respond, move the remote control one inch toward the center and try again.
*OGSPOUPGBTJOHMF BWFSBHFTJ[FEEFWJDF
*3TFOTPS
GSPOU
TIBSFcE. Repeat this until the device responds. UXPBWFSBHdF. Note this location and then start over from the [FEEFWJDFT other end of the display window plastic, repeat-
ing until the device responds again.
0OUPQPGBTJOHMF *3*3TFTOFTOPTSPS UBMMEFWJDF
*OGSPOU
TIBSFECZ UXPBWFSBHFTJ[FE
EFWJDFT
*3TFOTPS *3TFOTPS
Place IR emitters so the signal can be "seen" by the IR sensor on each device.
IMPORTANT
Position IR emitters so that each device's sensor "sees" the signal from only one emitter. Otherwise, a device receiving signals from multiple sources (remote controls, IR emitters) may not respond at all.
6. NetCommand
53
Initial NetCommand Setup for Most Devices
To perform this procedure, you need: · The remote controls for both the TV and the device you want to control. · The IR emitter cable supplied with the TV.
Note: To set up an A/V receiver, see "Setting Up NetCommand Control of an A/V Receiver" later in this chapter.
1. Connect and position the IR emitters for the devices you wish to control. See "IR Emitter Placement" in this chapter.
2. Set the TV's remote control slide switch to the TV position.
3. Open the NetCommand Learn screen in one of two ways:
· If working from the Auto Input Sensing screen for the device, highlight the Learn icon and press ENTER to open the Learn screen for the device.
· If performing NetCommand setup at any time after the device has been recognized through Auto Input Sensing:
a. Press INPUT to open the Input Selection menu.
b. Highlight the desired input icon and press ENTER to switch to that input.
c. Press MENU, highlight Inputs, and highlight Learn to open the Learn screen for the device.
4. The first function highlighted in the Learn screen is always Power On. Aim the TV's remote control at the TV and press ENTER to begin learning for that function.
5. When the Power On text starts flashing, aim the device's remote control at the TV and press and hold the POWER key until a check mark appears next to Power On.
· If the text stops flashing before the check mark appears, repeat this step.
· To remove the key from NetCommand control, press the CANCEL key while the key name is highlighted.
6. Press the
keys on the TV's remote control
to highlight other keys on the list. Repeat steps
4 and 5 for each additional function you wish to
control through NetCommand.
7. If the device's remote control has keys that are not in the list, you can associate up to any four keys with the F1 through F4 keys.
For example, for a DVD player, assign the F1 and F2 keys to the DVD player's CHAPTER SKIP FORWARD and
From the Auto Input Sensing screen, highlight the Learn icon and press ENTER to open the NetCommand Learn screen.
Inputs > Learn screen
CHAPTER SKIP BACK keys. Perform NetCommand setup for the F keys the same as you did for the named keys. 8. If the device has a separate POWER OFF key, press
on the TV's remote to highlight Power Off. Repeat the earlier steps to "learn" the POWER OFF key. If the device has no POWER OFF key, skip this step. 9. Press EXIT to finish NetCommand "learning" for the current device.
Adding or Removing Device Keys from NetCommand Control
1. Press INPUT to open the Input Selection menu and select the affected device.
2. Open the Inputs menu and highlight the Learn icon. 3. When the Learn screen displays:
· To add keys: Continue as described earlier under "Initial NetCommand Setup for Most Device Types."
· To delete keys: Highlight the name of the key you wish to delete and press CANCEL on the TV`s remote control to clear the check mark.
54
6. NetCommand
NetCommand Specialized Device Keys
Refer to this chart when "learning" device keys. "Learn" some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1F4 keys.
See the following page for more on keys marked in the "Special Operation Method" column.
Key Name in Learning Screen
Power On Guide Channel Up Channel Dn Page Up Page Dn Menu Adjust Up Adjust Dn Adjust Lt Adjust Rt Enter Cancel Play Stop Forward Rewind Pause Record 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 Enter (digits)
- (separator)
Recall (QV) Info
F1 F2 F3 F4 Power Off
Function
Power On or Power ON/OFF (toggle) On Screen Program Guide or DVD Disc Menus Next Channel Higher Next Channel Lower Page Up in Guides Page Down in Guides
Name on TV Remote Control POWER GUIDE CH/PAGE CH/PAGE CH/PAGE CH/PAGE
Setup menu for device
MENU
Adjust or arrow up
Adjust or arrow down
Adjust or arrow left
Adjust or arrow right
Enter or Select (menus) Cancel or erase (menus) Start playback
ENTER --/CANCEL
Stop playback
Fast Forward
Rewind/Fast Reverse
Pause playback
Start Recording
Digit functions
Use after digits to directly access channels by number Add digital channel separator between main channel number and sub-channel number Last Channel Recall On-screen status display or information display
1, 2, 3, 4, 5, 6, 7, 8, 9, 0 ENTER
--/CANCEL
QV INFO
ASSIGN YOUR
F1
CHOICE OF
F2
SPECIALIZED
F3
FUNCTIONS
F4
Power Off
POWER
See Special Operation Method Table
* *
* * *
* *
* *
May require two keypresses
6. NetCommand
55
Operating NetCommand-Controlled Devices
To Control Most Device Types
To Control an A/V Receiver
As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE . NetCommand then sends the "learned" channel-up control signal to the cable box.
1. With an IR emitter properly positioned in front of the device, use the Inputs > Learn screen to perform NetCommand setup for the device.
2. When you wish to use the device, press INPUT to display the Input Selection menu.
3. Press
to highlight the icon for the device.
4. Press ENTER to switch the TV to the device. Note: if you have set up automatic input switching for the A/V receiver, the A/V receiver will automatically switch to the correct input for the device.
5. To operate the device using the TV's remote control, set the slide switch to the TV position.
6. Point the remote control at the TV (not the device) and press the key for the desired function.
Special Operation Methods
Switching Audio to and from the A/V Receiver 1. Press AUDIO. 2. Press to show the Speakers option. 3. Press to select either AV Receiver or TV.
Controlling A/V Receiver Power 1. Press AUDIO. 2. Press to show the Speakers option. 3. Press to select AV Receiver. 4. Point the remote control at the TV (not the A/V
receiver) and press POWER to power the A/V receiver on or off
Controlling Other A/V Receiver Functions With the A/V receiver powered on and selected, the TV's remote operates the volume and mute functions. Also, when you switch to a device in the Input Selection menu, the A/V receiver automatically switches to the correct audio input for the device.
Key Name in Learning Screen
Special Operation Description and Setup
How to Use
Power On
Manual Power On/Off Use for devices that have only one POWER key.
1. Press INPUT to display the Input Selection menu.
2. Press
to highlight the icon for the
device to be powered on or off.
3. With the Input Selection menu still displayed, press POWER to send the power signal; you may need to press POWER twice.
Note: If you press POWER without the Input Selection displayed, the TV will turn off.
4. Press ENTER to switch the TV to the device.
Power On Power Off
Automatic Power On/Off
·
This feature is only for devices that have separate Power On and Power Off keys on their original remote controls. If your device does not have a separate Power Off key, do not use the Power Off learning position; use only the Manual Power ON/OFF method described above.
In the NetCommand Learn screen:
a. "Learn" the Power On command in the Power · On learning position.
b. "Learn" the Power Off command in the Power Off learning position.
To Power On the Device
1. Press INPUT to display the Input Selection menu.
2. Press
to highlight the icon for
the device to be powered on or off.
3. Press ENTER to switch the TV to the device and NetCommand will send the Power On command to the device.
To Power Off the Device When you turn the TV off, the TV sends all learned Power Off commands to all devices.
Menu
Displaying the Menu for a Device
1. While watching a device, press INPUT to display the Input Selection menu with the device icon highlighted.
2. Press MENU to send the menu signal to the device. The Input Selection menu will automatically clear from the screen.
56
6. NetCommand
Operating NetCommand-Controlled Devices, continued
Key Name in Learning Screen
Special Operation Description and Setup
Guide
Displaying the Disc Menu (DVD or high-definition disc format)
How to Use
While watching the device, press GUIDE to display the disc menu.
Page Up Page Dn
Enter
"Learn" the Disc Menu, Top Menu, or other key as named on the original remote in the Guide learning position.
Displaying the On-Screen Program Guide (cable box or satellite receiver)
1. While watching the device, press GUIDE to display the guide.
1. "Learn" the Guide key on the original remote in 2. Press CH/PAGE / to send the Page Up/Dn
the Guide learning position.
commands for the guide.
2. Learn the PAGE and PAGE keys of the original remote in the Page Up and Page Dn learning positions.
Using Page Up/Down
Inside the Guide
If the device's original remote control has separate Press CH/PAGE / to send the Page Up/Dn keys for Channel Up/Dn and Page Up/Dn, the commands.
TV remote control's CH/PAGE / key can work like the two separate keys.
1. "Learn" CHANNEL / in the Channel Up/Dn positions.
Outside the Guide Press CH/PAGE / to send the Channel Up/Dn signal.
2. "Learn" PAGE / in the Page Up/Dn positions.
Enter Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have "enter" functions. One key is for menus and is often labelled SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand uses the same ENTER key for both operations.
When ENTER has a menu or guide function or when 1. Press MENU or GUIDE to display the device's
the original remote control uses the same key for
menu or guide.
menus and channel selection:
2. Press ENTER within the menu and
Learn the ENTER, SELECT, or OK key in the
NetCommand will send the Enter signal for
NetCommand Enter learning position.
menus.
Enter (digits) When ENTER is for channel changes (i.e., the original Press digit key(s) and then press ENTER.
remote control has a separate ENTER key for this NetCommand will send the Enter signal for
function):
channel selection.
Cancel
-- (separator)
Learn the ENTER key for channel selection in the NetCommand Enter (digits) learning position. Use this learning position only if the original remote control has separate keys for Enter in menus and Enter for channel selection. CANCEL as the Cancel or Exit Function "Learn" the Cancel or Exit function in the NetCommand Cancel learning position
The symbol "--" can serve as the separator between a digital channel's main and subchannel digits, e.g., digital channel 12-1 (main channel is 12, sub-channel is 1).
"Learn" the channel separator function in the NetCommand (separator) learning position.
1. Press MENU or GUIDE to display the menu or guide.
2. Press CAN--CEL and NetCommand will send the Cancel or Exit signal.
Press digit key(s) and press CAN--CEL . NetCommand will send the channel-separator signal.
6. NetCommand
57
Setting Up NetCommand Control of an A/V Receiver
Perform this setup to: · Operate the A/V receiver's power and volume functions with the TV's remote control. · Enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV's Input Selection menu.
To set up control of an A/V receiver you need: · The remote controls for both the TV and the A/V receiver. · The IR emitter cable supplied with the TV.
Note: To set up control of other device types, see "Initial NetCommand Setup for Most Devices" earlier in this chapter.
Perform this setup using the Inputs > AVR screen, shown below.
1
2
3
3. Set the TV's remote control slide switch to the TV position.
4. Open the AVR screen in one of two ways:
· If using the Auto Output Sensing screen for the A/V receiver, highlight the Learn icon and press ENTER to open the AVR screen.
· If performing NetCommand setup at any time after the A/V receiver has been recognized through Auto Output Sensing:
Press MENU, highlight Inputs, and highlight AVR to open the AVR screen.
5. The first function highlighted in the AVR screen is always Power On. Aim the TV's remote control at the TV and press ENTER to begin learning for Power On.
A/V Receiver (AVR) screen. Perform NetCommand IR "learning" for A/V receiver power and volume keys.
4
AVR screen overview 1 Power and volume commands the TV can send to the
A/V receiver when "learned" 2 A check under Learn/Name means the TV has
"learned" the command to switch the A/V receiver to the input. 3 Input1 through Input4 are temporary placeholder names for A/V receiver inputs. Use this screen to assign meaningful names , e.g., the name of the A/V receiver input. 4 Use this list to match devices connected to the TV inputs with audio inputs on the A/V receiver.
Setup to Control the A/V Receiver's Power and Volume Functions
1. Connect your A/V receiver to the TV and any additional devices. See chapter 3, "TV Connections," for suggestions.
2. Connect the IR emitter cable to the TV and position the IR emitter where it can send signals to the A/V receiver.
6. When the Power On text starts flashing, aim the A/V receiver's remote control at the TV and press and hold the POWER or POWER ON key until a check mark appears next to Power On.
· If the text stops flashing before the check mark appears, repeat this step.
· To remove the key from NetCommand control, press the CANCEL key while the key name is highlighted.
By completing "learning" for the power key, NetCommand now operates the power function for the A/V receiver.
Point the TV's remote control at the TV to control the A/V receiver.
7. Press the key on the TV's remote control to highlight other keys in the list. Repeat steps 5 and 6 for each additional function you wish to control through NetCommand.
8. If the A/V receiver has a separate POWER OFF key, press on the TV's remote to highlight Power Off. Repeat steps 5 and 6 to "learn" the POWER OFF key.
Note: Perform "learning" for Power Off only if the A/V receiver's remote control has a separate POWER OFF key.
9. When finished "learning" the power and volume keys, either press EXIT to watch TV or proceed to the next section to continue NetCommand setup of the A/V receiver.
58
6. NetCommand
Setting Up NetCommand Control of an A/V Receiver, continued
Setup to Control Automatic Switching of A/V Receiver Audio Inputs
Two different setups are described here:
Setup 1: Automatic A/V Receiver Switching to TV Audio Input
Setup 2: Automatic A/V Receiver Switching for a device sending audio directly to the A/V receiver
· Audio Available from TV only: Use Setup 1.
Audio from ANT 1 and ANT 2 must be sent to the A/V receiver from the TV's DIGITAL AUDIO OUT or analog AVR AUDIO OUTPUT.
Use Setup 1 to make the A/V receiver switch to its designated TV audio input when viewing these sources.
· HDMI, Digital Stereo Audio Only: Use Setup 1
Digital stereo audio from an HDMI connection is available both in digital format (from the TV's DIGITAL AUDIO OUT) jack and in analog format (from the TV's AVR AUDIO OUTPUT jack).
· Analog Stereo Audio: Use Setup 1.
Audio from sources with only analog stereo output
(such as a VCR) can be sent either directly to the
A/V receiver or through to the TV and then on to the
A/V receiver.
BOBMPHBVEJP
Mitsubishi recommends youWsJEeFnPd audio through
the TV as shown in the example. Setup 1 causes
the A/V receiver to switch to its input designated for
TV audio.
"/5
If you have a digital A/V receiver, the "T/V5m akes the
audio available by converting analog audio to a
digital output.
· Digital Surround Sound: Use Setup 2.
A device can send digital surround sound such as Dolby Digital or DTS directly to the A/V receiver, bypassing the TV entirely. The device might be a DVD player, cable box, or satellite receiver, and
IMPORTANT
To hear audio sent from the TV to the A/V receiver, you must have: · physically connected the TV to the A/V
receiver · selected the A/V receiver as the audio
source. Press AUDIO, then to show the Speakers option, then to select the A/V Receiver. · "learned" the IR codes for the A/V receiver inputs · chosen the correct input in the NetCommand A/V Receiver Learn screen
could have HDMI output. A DVD player is used in this example.
Your setup may include additional devices with digital surround sound connected directly to the A/V receiver. These devices might be a DVD player plus a cable box or satellite receiver.
Before You Begin
1. Connect your A/V devices to the TV and connect your A/V receiver to the audio outputs on the TV and the DVD player. See chapter 3, "TV Connections," for suggestions.
2. Open the Inputs > AVR menu.
Note:
The terms Input 1Input 4 used in the AVR screen are temporary placeholder names. They refer to the A/V receiver inputs for which the TV can learn IR codes.
Setup 1: Automatic A/V Receiver Switching to Its TV Audio Input
Most devices are set up like the VCR in this example, in which analog audio from the device is sent through the TV.
Use this setup for: · Sources providing only analog stereo output, such
as a VCR. · Audio from ANT 1 and ANT 2
7$3XJUI "OBMPH"VEJP0VUQVU
BVEJPPVUQVUGSPN 57 EJHJUBMPSBOBMPH
BVEJP WJEFP WJEFP
BOBMPHBVEJP
57
*ODPNJOH $PBYJBM$BCMF UP"/5"/5
57BVEJP PVU
%7%BVEJP JOQVU
57BVEJPJOQVU
"73FDFJWFS
Setup 1: A/V receiver audio from the TV's digital or analog audio output (DIGITAL AUDIO OUT or AVR AUDIO OUTPUT)
1. Under Learn/Name, navigate to highlight the area next to Input 1.
In this example, the IR code for the A/V receiver's TV Audio input will be "learned" as Input 1.
2. Press ENTER on the TV's remote control.
3. While the text Input1 is flashing, press and hold the TV INPUT key on the A/V receiver's remote control.
4. When a check appears next to Input 1, release the TV INPUT key.
· If the text stops flashing before the check mark appears, repeat this step.
6. NetCommand
59
Setting Up NetCommand Control of an A/V Receiver, continued
· To erase the IR code just "learned," press CANCEL while the name is highlighted.
5. Press to highlight the name Input1. You can enter a custom name using the letters/numbers on the remote control. It is best to assign names to "learned" inputs that match the input names displayed on the A/V receiver. For this example, enter the custom name TV using these guidelines: · To select a character, repeatedly press a number key on the remote control to cycle through the characters associated with the key. Special characters are avai*lOa$DbPPleNBYJwOJBHiMth BtVhEeJP1 kWJeEyFP(!, &, blank space) and 0 key (/,*,-)$. BCMF · Press ENTER to set the character and move the highlight to the next character. WJEFP · To delete a character, highlight the character and press CANCEL. · To highlight the first character, repeatedly press CANCEL.
6. Press to move the highlight to the Assign column.
7. Use to highlight AudioOut (TV audio output). The triangular marker is always next to the assigned sound source.
8. Press EXIT if finished or continue with setup for another TV source.
Completed NetCommand setup described for controlling A/V receiver switching to the A/V receiver's audio input labelled "TV."
Setup 2: Automatic A/V Receiver Switching for a Surround Sound Device Use this setup to send digital surround sound directly from a device to an A/V receiver. 1. Under Learn/Name, navigate to highlight the area
next to Input2. In this example, the IR code for the A/V receiver's DVD Audio input will be "learned" as Input 2. 2. Press ENTER on the TV's remote control.
WJEFP BOBMPHBVEJP
IMPORTANT
All audio from what you are watching on the TV
is always available as a stereo or mono output
on both the T%V7%'s1MABZVFRSXAJUIU DIO OUTPUT and DIGITAL A%UJHDJUBIOM4VOSSUPVTOEja4PcVkOsE.
EJHJUBMTVSSPV
To use the digital surround sound capabilities of your A/V receiver however, you must connect your DVD player, satellite receiver, or cable box directly to the A/V receiver, as surround sound may not be available from the TV's audio output.
%7%1MBZFS EJHJUBMTVSSPVOETPVOE
XJUI
%JHJUBM
4VSSPVOE 4PVOE
WJEFP
57
%7%BVEJP JOQVU
"73FDFJWFS
Setup 2: A/V receiver audio from a device providing surround sound directly to the A/V receiver
Completed NetCommand setup described for controlling A/V receiver switching to an A/V receiver input labelled "DVD."
3. While the text Input2 is flashing, press and hold the DVD INPUT key on the A/V receiver's remote control.
4. When a check appears next to Input 2, release the DVD INPUT key.
· If the text stops flashing before the check mark appears, repeat this step.
· To erase the IR code just "learned," press CANCEL while the name is highlighted.
5. Press to highlight the name Input2. Assign a custom name that matches the input name displayed on the A/V receiver. For this example, enter the custom name DVD using the number keys and the guidelines given earlier.
6. Press to move the highlight to the second Assign column.
7. Use to highlight DVD in the list of devices recognized by the TV. The triangular marker always indicates the assigned sound source.
8. Press EXIT if finished or continue for additional TV sources.
60
Appendices
Appendix A: Bypassing the Parental Lock. . . . . . . . . . 61 Appendix B: Specifications.. . . . . . . . . . . . . . . . . . . . 63 Appendix C: TV Guide Daily. . . . . . . . . . . . . . . . . . . . 64 Appendix D: Programming the Remote Control . . . . . . 68 Appendix E: Troubleshooting. . . . . . . . . . . . . . . . . . . 76
Lock Bypass Instructions Have Been Filed for Future Reference
Appendix A: Bypassing the Parental Lock
Appendices
61
Bypassing the Parental Lock
After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus.
If you forget your pass code, you can view the locked TV without entering your pass code. When you are prompted for your pass code, press the number 9 and QV keys on the TV remote control at the same time. This process temporarily unlocks the TV.
When entering the Lock menu, this process deletes your old pass code and prompts you to enter a new pass code.
· You can either enter a new pass code to open the Lock menu and make changes or press EXIT to close the menu.
· If any of the locks are turned on and you exit the menus when prompted for a new code, the old code and all lock settings are retained.
· If all locks are turned off and you exit the menus when prompted for a new code, then the previous code is erased.
IMPORTANT
Cut along the dotted line and file bypass instructions in a safe place for future reference.
IMPORTANT
When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a "universal" remote.
62
Appendices
This page intentionally left blank
Appendix B: Specifications
Size and Weight Dimensions (inches)
With Stand/Without Stand
Model LT-46244 LT-52244
Height
29.0/26.5 32.5/30.0
Width
42.3 48.0
Depth
12.6/5.6 14.2/5.8
Weight (lbs.)
With Stand/ Without Stand
73.0/64.2 86.0/76.6
Picture Technology and Power Consumption
Item
Specifications
LCD Screen
Color active matrix LCD, 1920 x 1080 dots, 16:9 aspect ratio
Backlight
Direct Type 24 CCFL
Power
LT-46244: LT-52244:
325 w 395 w
Channel Frequency Reception
Over-the-Air: VHF 213, UHF 1469 Analog Cable: 1125 Digital Cable: 1135
Channel Type*
Over the Air: Cable:
Analog NTSC, Digital ATSC with sub-channels (all 18 video formats)
Analog NTSC (non-scrambled) Digital QAM 64 and 256 with subchannels (non-scrambled)
* Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number.
Inputs
Type
Qty. Input Specifications
Antenna/Cable input
2
RF F connector, 75-ohm
HDMI (digital video/audio)
4 CEA-861D standard for digital audio and video via HDMI HDMI standard connector Video: 60 Hz: 480i, 480p, 720p, 1080i 24 Hz, 30 Hz, 60 Hz: 1080p Audio: PCM stereo
Composite Video
PC (digital signals only): VGA (640 x 480, 60 Hz) W-VGA (848 x 480, 60 Hz) SVGA (800 x 600, 60 Hz) W-SVGA (1064 x 600, 60 Hz) XGA (1024 x 768, 60 Hz) 1280 x 720, 60 Hz SXGA (1280 x 1024, 60 Hz) 1920 x 1080 (60 Hz) WXGA (1360 x 768, 60 Hz)
3 NTSC 480i only Video: RCA Pin Plug, 1.0 V p-p, 75 ohm
Appendices
63
Inputs
Type
Qty.
S-Video
2
Component
3
Video (Y/Pr/Pb)
USB Photo Port 1
Input Specifications
Four-Pin DIN Plug Y: 1.0 Vp-p 75-ohm C: 0.286 Vp-p (burst signal), 75-ohm
CEA-770.1 & CEA 770.2 480i, 480p, CEA 770.3 720p and 1080i (TV analog component video standards) RCA Pin Plug Y: 1.0 Vp-p (includes sync), 75-
ohm Pr: 700 mV p-p, 75-ohm Pb: 700 mV p-p, 75-ohm
For reading camera JPEG files only.
Audio Inputs
6 Analog left and right audio pairs RCA Pin Plug 500 mV (full scale), 43-k
ohm
HDMI
The HDMI inputs are compliant with CEA-861D standards for standard, extended, and high-definition video; digital audio, and HDCP copy protection.
Outputs Description Audio Speakers
Analog Audio (Signal)
Digital Audio Output
Qty. 2
1 pair
1
Output Specifications
5.5" x 2.2"
RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources, 1.5 Vrms + 0.5 Vrms (full scale) for digital sources.
RCA Pin Plug, Signal Type Dolby Digital, PCM stereo
64
Appendices
Appendix C: TV Guide Daily
Active Selection Source and Channel Information
Clock
Info Box
Program Rating Icons
Info Bar
Progress Indicator
Info Icon
Video Window Ad Panel
Program Title Tile
Highlighted Tile (indicates active selection)
Channel Call Letters
Channel Number
HD (highdefinition) Icon
This appendix explains the free TV Guide Daily service available with this TV. Use this optional service to:
· View 24 hours of show listings.
· Change how channels are displayed (channel call letters, numbers, or both).
· Watch the currently tuned channel while browsing listings.
· Get quick program information; icons indicate show ratings, new episodes, stereo, HD broadcasts, and closed captioning availability.
· Quickly tune the TV to a selected channel.
· View show descriptions and "what's on next" information for a selected channel in an expandable INFO box.
· Customize the channel lineup and listings
Initial Guide Setup
Before you can use TV Guide Daily, you must perform the initial setup from the TV's Inputs menu. See chapter 5, "TV Menu Settings," Inputs > Guide menu for more information. Note: These settings can be changed at a later date using the same procedure.
Main Guide Screen Elements
· The TV Guide Daily screen provides basic program information, channel call letters and number, current time, program rating, and high definition programming (HD) icons.
· The Highlight indicates the current active selection. To navigate the screen, move the highlight using the TV remote control's keys.
· The Info Bar displays specific broadcast information (new episode, TV or movie rating) and a show progress indicator. The Info Icon indicates that information or help is available.
· The Info Box displays selected program information, upcoming channel programming, and help information.
· The Video Window displays current channel programming while in the Guide.
· The Ad Panel displays program or product information.
Appendices
65
Appendix C: TV Guide Daily, continued
Navigating the Guide
Guide navigation is simple. Move the highlight around the screen using the TV remote control's and CH/Page keys. The highlight indicates the currently active tile in the Guide. Press INFO to see help and program information.
To open and close the Guide
· Press GUIDE to open or close TV Guide Daily (EXIT can also be used to close the Guide).
Note: Until the initial 24 hours of program listings have downloaded, the Setup Progress screen appears when you first open the Guide. Once the initial listings download is complete, the screen will go directly to the Guide.
To navigate through screens
· Press to move the highlight one item at a time.
· Press CH/PAGE / (Channel/Page Up/Down) to move up or down one full screen at a time.
· Press INFO to open the Info Box for on-screen help and program information. When the Info Icon is displayed on the Info Bar, press INFO repeatedly to view either full or brief information.
Program Information. With a program title highlighted, press the INFO key to see information in the Info Box for currently available and upcoming programs.
· While in the Guide, press MENU to display the Guide Setup screen. See also "Modify Guide Setup" on the next page.
To jump to a specific channel in the Listings
Enter a channel number using the remote control's number keys. Use the /cancel key to enter the separator for a digital sub-channel number. Press ENTER to move the highlight to the channel just entered.
Note: If the channel number entered does not exist, the highlight will move to the closest channel that is present in the listing.
To tune the TV to a program in the listings
Highlight the desired program title in the listings, then press ENTER.
Note: If the highlighted program airs sometime in the future, the TV will tune to the channel on which that show will air.
To check Guide setup progress
The Setup Progress screen displays the current Guide setup status. To open the Setup Progress screen:
1. While in the Guide Listings, press MENU. This displays the Setup Screen.
2. In the Setup Screen, press to highlight "Display setup progress" and press ENTER. The Setup Progress screen appears.
3. Press GUIDE to exit the Guide or press ENTER to return to the Setup Screen.
Accessing Ad Information
To view promotional information linked to ads · Repeatedly press to move the highlight to the Ad
panel. A screen with additional Ad information will appear. · To close the Ad screen, press to move the highlight back to the listings. Note: Some ads promote currently airing programs. If the ad is linked to a currently airing show, highlight the ad and press ENTER to watch the show.
Customize Guide Listings
You can customize how the Listings screen displays channel call letters/numbers. The options are: · Both. Both the channel call letters and number are
displayed. · Call Letters. Only call letters are displayed. · Number. Only channel numbers are displayed. To change the Channel ID display 1. Press to move the highlight to the desired channel
tile (channel number/call letters).
2. Press ENTER to change the display (Both, Call Letters, or Number). Each press of the ENTER key cycles through the choices.
3. To save changes, press to move the highlight back to the program listings.
66
Appendices
Appendix C: TV Guide Daily, continued
Modify Guide Setup
From the Guide Setup screen, you can change the channel lineup, change channel display settings, and view setup progress (e.g., when the next listings update will occur). To select a channel lineup You can view or change the channel lineup if more than one is available. Use the following procedure: 1. While in the Guide Listings, press MENU. This dis-
plays the Setup Screen. 2. Press to highlight "Change channel lineup" and
press ENTER. A selection screen will appear. 3. Make your lineup selection:
· If only one selection is available, Next will be highlighted. Press ENTER.
· If more than one selection is available, but you want to use the one already selected (check marked), press ENTER.
· If more than one selection is available and you want to select a different lineup, press to move the highlight back to selections. Press to move the highlight to the desired lineup and press ENTER to select it (add a check mark). Press to highlight Next and press ENTER. A confirmation screen will appear.
4. In the confirmation screen, verify the lineup selection: · If the selection is correct, press ENTER to select Yes (add check mark), press to highlight Next, and then press ENTER. · If the selection is incorrect, press to highlight No, press ENTER to select (add check mark), press to highlight Next, and then press ENTER to return to the Make Lineup Selection screen.
Note: You may need to try several lineup options before you receive the correct one for your area. To edit a specific tune channel number in the Listings grid, see "To Modify Channel Settings" below.
To modify channel settings You can edit how channels appear in the Guide Listing. Note: The default settings for each channel are determined by the broadcast data received by your TV.
Available Options · Position. Order of the channel in the Listings. · Channel. Determines whether or not the channel
is displayed in the Listings (On, Auto-hide, and Off). Auto-hide displays channels only when show information is available. · Tune Channel. Shows the channel number that displays in the Listings and which channel number is used when tuning to that channel.
Procedure 1. While in the Guide Listings, press MENU. This dis-
plays the Setup Screen. 2. Highlight "Change channel display" and press ENTER.
The channel editor screen will appear. 3. Use to highlight the desired row setting to be
changed.
· To change channel position (Position Number highlighted), press to move the position or enter a new channel position number. When correct, press to move the highlight to another position on the grid to save changes.
· To change channel display status (status tile highlighted; next to position number), repeatedly press ENTER to cycle through choices (on, auto, off). When correct, press to move the highlight to another position on the grid to save changes.
· To change tune channel number* (Channel Tune Number highlighted; far right), enter desired number with remote control number keys (--/CANCEL key for digital sub-channel separator). When correct, press to move highlight to another position on the grid to save changes.
*Note: If you receive both analog and digital versions
of the same channel, do not change the tune channel number of the digital channel to match the analog station, as this may hinder the ability of the Guide to receive data. Instead, locate the digital station in the channel editor and, if necessary, change the channel row position to a location you prefer.
Appendices
67
Appendix C: TV Guide Daily, continued
TV Guide Daily Troubleshooting Tips Symptom 1. When I enter the Guide I see a Setup Prog-
ress screen.
Remarks
You have not yet received all of the program listings (it may take up to 24 hours to receive a full grid of listings).
2. Listing reads "Listings Pending."
3. Tiles in Listing read "No Listing" or "Title Unavailable."
4. Tiles in Listing read "Turned Off."
5. There are repeated or missing time slots in the Listings.
6. My channel lineup is incorrect or I see a channel lineup screen when I enter the Guide.
7. I receive a channel on two different broadcast services, but only one is available in the Guide Listings.
8. My TV is tuned to a different channel than the one I was watching the last time the TV was turned off.
The Guide has not yet completed initial setup, completed changes you made, or the Guide is setup incorrectly. Verify that your TV is properly connected to the input source. Then, verify that the ZIP code and input source (entered during initial setup of Guide) are correct. See chapter 5, "TV Menu Settings," and "Inputs Menu" for more information.
The Guide has not received updated show information or no information was available the last time the Guide received an update, update did not occur, or there was a power failure. Make sure you turn the TV off when not in use to allow for updates. In the case of a power failure, it may take up to 24 hours to update listings.
The channel you were watching before entering the Guide is turned OFF in the grid. Use the channel editor to change the channel setting to ON (see previous page, "Modify Guide Setup").
The Guide is close to the time that a Daylight Savings time adjustment is needed. The Guide automatically adjusts accordingly when the local time is 2:00 a.m. to account for the affected hour of programming. Once the adjustment is made, the Listings should return to normal within 24 hours.
An incorrect lineup for your area is selected in the Guide setup. Select the correct channel lineup for your area (see previous page, "Modify Guide Setup").
The Guide is not setup correctly. See previous page, "Modify Guide Setup."
The Guide changes the channel to receive updates and does not change the channel back until the update is complete. If the TV is turned on before the update is complete, the channel will not change back automatically.
68
Appendices
Appendix D: Programming the Remote Control
This appendix explains programming the TV's remote control to operate other A/V devices. This is distinct from NetCommand control. The TV's remote control can operate other devices by three different methods:
· Remote Control Programming: You must move the slide switch to the position specific to the type of device.
· NetCommand® IR "learning": You can operate other devices with the slide switch in the TV position.
· NetCommand for HDMI devices: You may be able to operate compatible HDMI devices with the slide switch in the TV position. See the device's Owner's Guide and the description in chapter 4, "TV Operation and Features."
Functions Available for Other A/V Devices
The TV's remote control can be programmed to operate other types and brands of A/V products. To use the remote when programmed, set the slide switch to the position labelled for the product type. The functions performed in each switch position can vary depending on the product. Not all functions work for all models. The most common functions available are listed on this page.
Set the remote control's slide switch to the type of device you wish to program for or control.
IMPORTANT Some manufacturers may change their products or they may use more than one remote control system. The TV's remote control may be unable to operate your A/V equipment in these cases.
VCRs and DVRs
· CH /
· POWER
· SLEEP
·
(FAST Forward)
·
(Pause)
·
(Play)
·
(Record)
·
(Reverse)
·
(Stop)
· GUIDE (DVR only)
· MENU (DVR only)
· 09 Number Keys
Mitsubishi VCRs are compatible with some additional keys.
Cable Boxes and Satellite Receivers
· AUDIO (PAGE UP)
· 09 Number Keys (on
· QV Cancel (last channel
some models)
on some models)
· F1F4 (A, B, C, D keys
· CH /
on some models)
·
· · · ·
· ·
ENTER (on some models) GUIDE (on some models) LIST POWER
(on some models) VIDEO (PAGE DOWN) QV or CANCEL (ENTER for
The record/playback
keys (on some models):
·
(FAST Forward)
·
(Pause)
·
(Play)
·
(Record)
·
(Reverse)
·
(Stop)
channels on some
models)
A/V Receivers
· MUTE · POWER · SLEEP · VOLUME · 09 Number Keys
· Direct Input Selec-
tion keys: numbers, FAV and QV (on some Mitsubishi models)
CD Players
(not all functions for all models)
· SLEEP
·
(FAST Forward)
·
(Pause)
·
(Play)
·
(Reverse)
·
(Stop)
· 09 Number Keys
DVD and Laser Disc Players (not all functions for all models)
· CANCEL (on some
·
(FAST Forward)
models)
·
(Pause)
· CH / (for track
·
(Play)
skip on some models) ·
(Record)
· ENTER
·
(Reverse)
· MENU
·
(Stop)
· POWER
· 0-9 Number Keys (on
· SLEEP
some models)
·
(on some
models)
Appendices
69
Appendix D: Programming the Remote Control, continued
Programming the Remote Control
1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position.
Switch Position Cable/SAT VCR
DVD
Audio
Affected Device
Cable Box DTV Receiver Satellite Receiver
VCR DVR Laser Disc Player DVD Player/Recorder
DVD Player/Recorder DVR Laser Disc Player VCR
A/V Receiver Audio Amplifier CD Player
2. Press and hold POWER on the remote control for several seconds until the key blinks twice and goes off.
3. Release the POWER key.
4. Enter the first five-digit code listed for your equipment.
· The POWER key blinks twice when you start to enter the code and then once for each additional keypress.
· The POWER key blinks twice when you finish entering a valid code.
· Move the slide switch to another position if you need to start over or wish to exit programming mode.
5. Point the remote control at the equipment and press POWER. If the product has no power on/off function, press a different key, such as (Play), (Stop), VOL , or MUTE.
· If the equipment responds, the remote control is properly programmed to operate the equipment.
· If the equipment does not respond, repeat steps 24 with the next five-digit code listed for your equipment.
IMPORTANT
You may need to reprogram the remote control after changing the batteries.
6. Once you have found the correct code, write it in the space below for future reference.
Switch Position CABLE/SAT VCR DVD AUDIO
Device Type
Code
Code Verification
To determine the code programmed for any position of the slide switch:
1. Move the slide switch to the position you wish to verify.
2. Press and hold POWER on the remote control for several seconds until the key blinks twice and goes off.
3. Press keys 9 9 0
4. Press 1 and count the blinks of the power key. Write down the number of blinks as the first digit of the code.
5. Repeat step 4 for the second, third, fourth, and fifth digits of the code.
Audio Lock: Universal A/V Receiver Control
With Audio Lock active, the remote control operates the volume and mute functions of the A/V receiver in all positions of the slide switch. Activate Audio Lock if you normally use an A/V receiver with your TV and other A/V equipment.
1. Program the AUDIO position for your A/V receiver as described earlier in this section.
2. Move the slide switch to the AUDIO position. 3. Press and hold POWER on the remote control for
several seconds until the key blinks twice and goes off. 4. Press keys 9 9 3 ENTER The POWER key will blink twice to indicate Audio Lock is active.
To Reset the Remote Control to Operate Volume and Mute for the TV Speakers
1. Press and hold POWER for several seconds until the key blinks twice and goes off.
2. Press keys 9 9 3 VOL . The POWER key will blink four times to indicate Audio Lock has cleared.
70
Appendices
Appendix D: Programming the Remote Control, continued
Programming Codes
Audio Amplifiers
Brand
Code
Acurus
30765
Adcom
31100, 30577
Altec Lansing 31742
Aragon
30765
Bel Canto
31583
Design
Bose
30674
Carver
30892
Classe
31462, 31461
Curtis Mathes 30300
Durabrand
31561
Elan
30647
GE
30078
Harman/Kardon 30892
JVC
30331
Klipsch
30765
Left Coast
30892
Lenoxx
31561
Lexicon
31802
Logitech
31408
Marantz
30892
Mark Levinson 31483
McIntosh
30251
Mondial
30765
Optimus
30823, 30395,
30300
Philips
30892
Pioneer
30823, 30300,
30257, 30013
Polk Audio
30892
RCA
30823, 30300
Realistic
30395
Sharp
30226
Sony
30815
Soundesign
30078
Technics
30374, 30372
Toshiba
30353
Victor
30331
Wards
30078, 30013
Yamaha
30354
A/V Receivers Brand ADC Adcom Aiwa
Akai Alco AMC Amplifier Technologies Anam Apex Digital Arcam
Code 30531 31617, 31616 31641, 31405, 31388, 31347, 31321, 31243, 30189, 30121 31255 31390 31077 31584
31609, 31074 31774, 31430, 31257 31189
A/V Receivers Brand Atlantic Technology Audiophase Audiotronic Audiovox B & K
Bel Canto Design BK Bose
Brix Cambridge Soundworks Capetronic Carver
Coby Curtis Delphi Denon
Fisher Fosgate Glory Horse GPX Harman/Kardon
Hitachi Integra JBL JVC
Kenwood KLH Koss Linn Liquid Video Magnavox
Marantz
McIntosh Micromega Mitsubishi
Myryad Nakamichi Onkyo
Optimus
Oritron Outlaw
Code 31487
31387 31189 31627, 31390 30840, 30820, 30701 31584
30702 31253, 31229, 30639 31602 31477
30531 31289, 31189, 30189, 30121 31263 30797 31414 31360, 31311, 31142, 30121, 31801, 31409 31487 31263 31299 31306, 31304, 31289, 30891, 30189, 30110 31801, 31273 31320, 31298, 30135 31306, 30110 31811, 31643, 31495, 31374, 31282, 31263, 31058 31570, 31569, 31313 31428, 31390 31497, 31366 30189 31497 31514, 31269, 31189, 30531, 30189 31289, 31269, 31189, 30200, 30189, 31289 31189 31957, 31922, 31921, 31920, 31393, 30176 31189 31555, 31313, 30097 31320, 31298, 30842, 30135 31074, 31023, 30849, 30797, 30670, 30531 31497, 31366 31487
A/V Receivers Brand Panasonic
Philips
Pioneer
Polk Audio Proscan RadioShack RCA
Rio Samsung Sansui Sanyo Sharp Sharper Image
Sherwood Sirius Sonic Blue Sony
Soundesign Stereophonics Sunfire Sylvania Teac Technics Thorens Toshiba Venturer Wards XM Yamaha
Code 31764, 31763, 31633, 31548, 31518, 31509, 31363, 31350, 31316, 31308, 31288, 30309 31368, 31365, 31283, 31269, 31268, 31266, 31189, 30189 31384, 31343, 31023, 30630, 30531, 30150, 30014 31414, 31289, 30189 31254 31263 31609, 31511, 31390, 31254, 31074, 31023, 30531 31869 31500, 31295 31189, 30189 31801 31386, 31361 31416, 31411, 31410, 31409, 31385, 31263, 30797 31077 31811, 31627, 31602 31869 31858, 31759, 31758, 31658, 31622, 31558, 31529, 31503, 31458, 31441, 31406, 31382, 31371, 31367, 31258, 31131, 31058 30670 31023 31313 30797 31528, 31390, 31267, 31074 31633, 31518, 31308, 30309 31189 30135 31390, 30849 30189, 30014 31414, 31406 31375, 31331, 31276, 31176, 30176
Appendices
71
Appendix D: Programming the Remote Control, continued
Programming Codes, continued
CD Players Brand Aiwa Akai Arcam Audio-Technica Burmester California Audio Labs Carver
Classic Denon
DKK DMX Electronics Emerson Fisher Garrard Gemini Genexxa GPX Harman/Kardon
Hitachi Integra JVC Kenwood
KLH
Koss Krell LG Linn LXI Magnavox
Marantz
Mark Levinson McIntosh
MCS MGA Miro Mission Mitsubishi MTC NAD Nikko NSM Onkyo
Code 30157 30156 30157 30170 30420 30303, 30029
30437, 30299, 30179, 30157 31297 30873, 30034, 30003 30000 30157 30305 31325, 30179, 30174 30420, 30393 30625 30305, 30032 31296 31202, 30173, 30157, 30083 30032 30101 31294, 30072 30826, 30681, 30626, 30190, 30037, 30028, 31711, 31373, 31372, 31318 31317 30157 31208 30157 30305 30305, 30157, 30038 30626, 30435, 30180, 30157, 30038, 30029 31484 30660, 30290, 30256 30029 30083 30000 30157 30098, 30083 30625, 30420 30299, 30019 30625, 30174, 30170 30157 31327, 30868, 30102, 30101
CD Players Brand Optimus
Panasonic
Parasound Philips Pioneer
Polk Audio Proceed Proton QED Quad Quasar RadioShack RCA
Realistic Rotel SAE Sansui Sanyo Scott Sears Sharp
Sherwood Sonic Frontiers Sony
Soundesign Sugden Symphonic TAG McLaren Tascam TDK Teac
Technics Tivoli Audio Toshiba Victor Wards Yamaha
YBA Yorx
Code 31075, 31063, 30468, 30437, 30420, 30305, 30179, 30145, 30087, 30037, 30032, 30000 30752, 30388, 30303, 30029 30420 30626, 30274, 30157 31087, 31063, 31062, 30551, 30468, 30305, 30032 30157 30420 30157 30157 30157 30029 31075 31062, 30764, 30468, 30420, 30305, 30179, 30053, 30032 30420, 30180, 30179 30420, 30157 30157 30305, 30157 30179, 30087 30305 30305 30861, 30265, 30180, 30037 31067, 30180 30157 31364, 30673, 30605, 30604, 30490, 30185, 30100, 30000 30145 30157 30305 30157 30420 31208 30420, 30393, 30378, 30180, 30174 30303, 30029 31553 30299, 30019 30072 30157, 30053 31292, 30888, 30490, 30261, 30187, 30170, 30036, 30625 30461
Cable Boxes Brand ABC
Allegro Americast Antronix Archer
BBT Belcor Bell & Howell Bell South Cable Star Cabletenna Cableview Century Citizen Clearmaster ClearMax Colour Voice Comtronics Contec Coolmax Digeo Digi Director Dumont Eastern Emerson Everquest Focus Garrard GC Electronics Gemini General Instrument GoldStar Goodmind Hamlin
Hitachi Hytex i3 Micro Jasco Jerrold
Linsay Magnavox Memorex Motorola
Movie Time Multitech Myrio Novaplex NSC Oak
Code 10017, 10014, 10013, 10011, 10008, 10007, 10003, 10001 10315, 10153 10899 10207, 10022 10797, 10207, 10153, 10022 10267 10056 10014 10899 10056 10022 10022 10153 10315, 10153 10883 10883 10031, 10025 10040 10019 10883 11187 10637 10476 10637 10002 10797 10040, 10015 10400 10153 10207, 10056 10797, 10015 10810, 10476, 10276, 10011, 10003 10144, 10040 10797 10273, 10259, 10034, 10020, 10009 10011 10007 11602 10315, 10153, 10015 10810, 10476,10276, 10024, 10015, 10014, 10012, 10011, 10003 10440 10027 10000 11376, 11254, 11187, 11106, 10810, 10476, 10276, 10014 10156, 10063 10883 11602 10618 10156, 10063 10019, 10007
72
Appendices
Appendix D: Programming the Remote Control, continued
Programming Codes, continued
Cable Boxes Brand Optimus Pace Panasonic Panther Paragon Philips
Pioneer
Popular Mechanics Pulsar Quasar RadioShack
RCA Realistic Recoton Regal
Regency Rembrandt Runco Samsung Scientific Atlanta
Seam Sejin Signal Signature SL Marx Sony Sprucer Starcom Stargate Starquest StarSight Supercable Supermax Sylvania Tandy TeleCaption Teleview Texscan TFC Thomson Timeless Tocom Torx Toshiba Tristar Tusa TV86 Unika United Artists Universal
V2 Viewmaster Viewstar
Code 10021 11877, 10237, 10008 10107, 10021, 10000 10637 10000 11305, 10317, 10153, 10031, 10027, 10025 11877, 10877, 10533, 10144, 10023 10400
10000 10000 10883, 10797, 10315, 10015 11256, 10021 10207 10400 10279, 10273, 10259, 10020 10002 10011 10000 10144, 10040 11877, 10877, 10477, 10017, 10008, 10510 11602 10040, 10015 10011 10040 11006 10021 10015, 10003 10797, 10040, 10015 10015 10422 10276 10883 10001 10258 10221 10040 10001 10310 11256 10418, 10040 10013, 10012 10003 10000 10883 10015 10063 10207, 10153, 10022 10007 10207, 10191, 10153, 10056, 10022, 10883 10883 10258, 10063, 10027
Cable Boxes Brand Vision Vortex View Zenith
Zentek
Code 10883 10883 10899, 10525, 10054, 10000 10400
DVD Players/Recorders
Brand
Code
Adcom
21094
Aiwa
20641
Akai
21089, 20770
Alco
20790
Allegro
20869
Amphion Media 20872
Works
AMW
20872
Apex Digital
21100, 21061,
21056, 21020,
21004, 20797,
20796, 20794,
20755, 20717, 20672
Aspire Digital
21407, 21168
Audiologic
20736
Audiovox
21072, 21041, 20790
Axion
21072
B & K
20662, 20655
Bel Canto
21571
Design
Blaupunkt
20717
Blue Parade
20571
Broksonic
20695
California Audio 20490
Labs
CAVS
21057
Cinea
20831
CineVision
20876, 20869,
20833
Citizen
21277
Coby
21351, 21177, 21165,
21107, 21086,
20852, 20778
Craig
20831
Curtis Mathes 21087
CyberHome
21129, 21117, 21024,
21023, 20874, 20816
Daewoo
21242, 21234,
21172, 21169,
20869, 20833,
20784, 20705
Daytek
20872
Denon
20634, 20490
Desay
21407
Disney
21270, 20675
Dual
21085, 21068
Durabrand
21127
DVD2000
20521
Emerson
21268, 20675,
20591
Enterprise
20591
Fisher
20670
DVD Players/Recorders
Brand
Code
Funai
21334, 21268,
20675
Gateway
21158, 21077, 21073
GE
20815, 20717, 20522
Go Video
21730, 21304,
21158, 21144,
21099, 21075,21044,
20869, 20833,
20783, 20744,
20741, 20715
Go Vision
21072
GoldStar
20741
GPX
20769, 20699
Gradiente
20490
Greenhill
20717
Grundig
20539
Harman/Kardon 20702, 20582
Hitachi
20664, 20573
Hiteker
20672
iLo
21348
Initial
20717
Integra
20627, 20571
Jaton
21078
JBL
20702
JSI
21423
JVC
21275, 21164,
20867, 20623,
20558
jWin
21051, 21049
Kawasaki
20790
Kenwood
20737, 20682,
20534, 20490
KLH
21149, 21020,
20790, 20717
Konka
20721, 20711
Koss
21423, 20896,
20651
Landel
20826
Lasonic
21173, 20798
Lecson
21533
Lenoxx
21127
LG
20869, 20801,
20741, 20591
LiteOn
21440, 21416,
21158, 21058
Loewe
20511
Magnavox
20675, 20646,
20539, 20503
Malata
21159, 20782
Marantz
20539
McIntosh
21533, 21273
Memorex
21270, 20831,
20695
Microsoft
20522
Mintek
20839, 20717
Mitsubishi
21521, 20521
Momitsu
21082
Myryad
20894
NAD
20741, 20692, 20591
Nakamichi
21222
Appendices
73
Appendix D: Programming the Remote Control, continued
Programming Codes, continued
DVD Players/Recorders
Brand
Code
NEC
20785
Nesa
20717
Next Base
20826
NexxTech
21402
Norcent
21265, 21107,
21003, 20872
Onkyo
20792, 20627,
20503
OptoMedia Elec- 20896
tronics
Oritron
20651
Panasonic
21762, 20703,
20632, 20503,
20490
Philips
21354, 21267,
20675, 20646,
20539, 20503,
PianoDisc
21024
Pioneer
21571, 20632,
20631, 20571, 20525
Polaroid
21086, 21061, 21020
Polk Audio
20539
Portland
20770
Princeton
20674
Proceed
20672
Proscan
20522
ProVision
20778
Qwestar
20651
RCA
20822, 20790,
20717, 20571, 20522
Rio
20869
RJTech
21360
Rotel
21178, 20623
Rowa
20823
Sampo
20752, 20698
Samsung
21075, 21044,
20820, 20744,
20573, 20490
Sansui
20695
Sanyo
20873, 20695,
20670
Sensory Science 21158
Sharp
21256, 20752,
20675, 20630
Sharper Image 21117
Sherwood
21077, 21043,
20770, 20633
Shinsonic
20839, 20533
Sigma Designs 20674
Sonic Blue
21099, 20869
Sony
21533, 21431,
21033, 20864,
20533
Sungale
21074
SVA
21105, 20860
Sylvania
21268, 20675
Symphonic
21268, 20675
TAG McLaren 20894
Teac
20809, 20790
Technics
20703, 20490
DVD Players/Recorders
Brand
Code
Technosonic
20730
Techwood
20692
Terapin
21031
Theta Digital
20571
Toshiba
21154, 20695,
20503
Tredex
20804, 20803,
20800, 20799
Urban Concepts 20503
US Logic
20839
Venturer
20790
Vizio
21226, 21064
Vocopro
21027
Xbox
20522
Xwave
21001
Yamaha
20545, 20539,
20490
Yamakawa
20872
Zenith
20869, 20741,
20591, 20503
Zoece
21265
Laser Disc Players
Brand
Code
Aiwa
20203
Carver
20323, 20194,
20064
Denon
20243, 20241,
20172, 20059
Disco Vision
20023
Funai
20203
Harman/Kardon 20194
Hitachi
20023
Kenwood
20258
Magnavox
20243, 20241,
20217, 20194
Marantz
20194, 20064
Mitsubishi
20059
NAD
20059
Optimus
20059
Panasonic
20204
Philips
20194,20064
Pioneer
20059, 20023
Polk Audio
20194
Quasar
20204
Realistic
20203
Samsung
20323
Sega
20023
Sony
20270, 20201,
20193
Technics
20204
Theta Digital
20194
Yamaha
20451, 20217
Satellite Receivers
Brand
Code
AlphaStar
10772
Chaparral
10216
Crossdigital
11109
DirecTV
11856, 11749, 11640,
11639, 11609, 11444,
11443, 11442, 11414,
11392, 11377, 11142,
11109, 11108, 11076,
10819, 10749, 10724,
10639, 10566,
10392, 10247, 10099
Dish Network System Dishpro
Echostar
Expressvu GE General Instrument GOI Goodmans Hisense Hitachi HTS Hughes Network Systems iLo Jerrold JVC LG Magnavox Memorex Mitsubishi Motorola NEC Next Level Panasonic Paysat Philips
Pioneer Proscan Proton RadioShack RCA
Samsung
Sanyo Sony Star Choice Tivo
11775, 11505, 11170, 11005, 10775, 11775, 11505, 11005, 10775 11775, 11505, 11170, 11005, 10775 11775, 10775 10566, 10392 10869
11775, 10775 11246 11535 11250, 10819 11775, 10775 11749, 11444, 11443, 11442, 11142, 10749 11535 10869 11775, 11170, 10775 11414, 11226 10724, 10722 10724 10749 10869, 10856 11270 10869 10701, 10247 10724 11749, 11442, 11142, 11076, 10819, 10749, 10724, 10722, 10099 11442 10566, 10392 11535 10869 11392, 10855, 10566, 10392, 10143, 11609, 11442, 11377, 11276, 11142, 11109, 11108 11219 11640, 11639, 10639 10869 11444, 11443, 11442, 11142
74
Appendices
Appendix D: Programming the Remote Control, continued
Programming Codes, continued
Satellite Receivers
Brand
Code
Toshiba
11749, 11285, 10819,
10790, 10749
UltimateTV
11640, 11392
Uniden
10724, 10722
US Digital
11535
USDTV
11535
Voom
10869
Zenith
11856
VCRs and DVRs
Brand
Code
ABS
21972
Admiral
20479, 20209,
20048
Adventura
20000
Aiko Aiwa
Akai
Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic
Calix Canon Capehart Carver CCE Citizen Colt Craig
Curtis Mathes
Cybernex CyberPower Daewoo
Daytron Dell Denon DirecTV Durabrand Dynatech Electrohome Electrophonic Emerex
20278 20307, 20124, 20037, 20000 20242, 20175, 20106, 20061, 20041 21972 20278 20035 20240 20278, 20037 20240 20104 20479, 20295, 20209, 20184, 20121, 20002 20037 20035 20020 20081 20278, 20072 20278, 20037 20072 20271, 20240, 20072, 20047, 20037 20760, 20162, 20060, 20041, 20035 20240 21972 20637, 20561, 20278, 20045, 20020 20020 21972 20042 20739 20039, 20038 20000 20043, 20037 20037 20032
VCRs and DVRs
Brand
Code
Emerson
21593, 20637,
20593, 20561,
20479, 20295,
20278, 20212,
20209, 20208,
20184, 20121,
20068, 20061,
20043, 20037,
20036, 20002,
20000
Fisher
20104, 20066,
20054, 20047
Fuji
20035, 20033
Funai
21593, 20593,
20000
Garrard
20000
Gateway
21972
GE
20761, 20760,
20240, 20202,
20060, 20035
Go Video
20643, 20526,
20432, 20240
GoldStar
20038, 20037
Gradiente
20000
Harley Davidson 20000
Harman/Kardon 20081, 20075,
20038
Harwood
20072, 20068
Headquarter
20046
Hewlett Packard 21972
HI-Q
20047
Hitachi
20105, 20089,
20042, 20041,
20000
Howard Com- 21972
puters
HP
21972
Hughes Network 20739, 20042
Systems
Humax
20739
Hush
21972
iBUYPOWER
21972
Jensen
20041
JVC
21162, 20067,
20041, 20008
KEC
20278, 20037
Kenwood
20067, 20041, 20038
KLH
20072
Kodak
20037, 20035
LG
21037
Linksys
21972
Lloyd's
20208, 20000
Logik
20072
LXI
20037
Magnasonic
20593
Magnavox
20593, 20563,
20149, 20110,
20081, 20039,
20035, 20000
Magnin
20240
Marantz
20081, 20035
VCRs and DVRs
Brand
Code
Marta
20037
Matsushita
21162, 20162, 20035
Media Center PC 21972
MEI
20035
Memorex
21262, 21162, 21037,
20479, 20307,
20240, 20209,
20162, 20104,
20048, 20047,
20046, 20039,
20037, 20035,
20000
MGA
20240, 20061,
20043
MGN Technol- 20240
ogy
Microsoft
21972
Mind
21972
Minolta
20105, 20042
Mitsubishi
20443, 20242,
20214, 20173,
20075, 20067,
20061, 20043
Motorola
20048, 20035
MTC
20240, 20000
Multitech
20072, 20000
NEC
20104, 20067,
20041, 20040,
20038
Nikko
20037
Nikon
20034
Niveus Media 21972
Noblex
20240
Northgate
21972
Olympus
20035
Onkyo
20222
Optimus
21262, 21162,
21062, 21048,
20593, 20432,
20162, 20104,
20048, 20037
Optonica
20062
Orion
20479, 20295,
20209, 20184,
20002
Panasonic
21262, 21162,
21062, 20616,
20225, 20162,
20077, 20035
Penney
20240, 20054,
20042, 20040,
20038, 20037,
20035
Pentax
20105, 20042
Philco
20035
Philips
21181, 21081, 20739,
20618, 20110,
20081, 20062,
20035
Pilot
20037
Appendices
75
Appendix D: Programming the Remote Control, continued
Programming Codes, continued
VCRs and DVRs
Brand
Code
Pioneer
20067
Polk Audio
20081
Portland
20020
Profitronic
20240
Proscan
20761, 20760,
20202, 20060
Protec
20072
Pulsar
20039
Quarter
20046
Quartz
20046
Quasar
21162, 20162, 20077,
20035
RadioShack
21037, 20000
Radix
20037
Randex
20037
RCA
20880, 20761,
20760, 20240,
20202, 20149,
20106, 20105,
20077, 20060,
20042
Realistic
20104, 20066,
20062, 20048,
20047, 20046,
20037, 20035,
20000
ReplayTV
20616, 20614
Ricavision
21972
Ricoh
20034
Runco
20039
Salora
20075
Samsung
20739, 20240,
20045
Samtron
20643
Sanky
20048, 20039
Sansui
20479, 20271,
20209, 20067,
20041, 20000
Sanyo
20240, 20159,
20104, 20047, 20046
Scott
20212, 20210,
20184, 20121,
20045, 20043
Sears
20105, 20104,
20066, 20054,
20047, 20046,
20042, 20037,
20035, 20000
Sharp
20848, 20062,
20048
Shintom
20072
Shogun
20240
Singer
20072
Sonic Blue
20616, 20614
Sony
21972, 21032,
20636, 20035,
20034, 20033,
20032, 20000
Stack 9
21972
STS
20042
VCRs and DVRs
Brand
Code
Sylvania
21593, 20593,
20110, 20081,
20043, 20035,
20000
Symphonic
21593, 20593,
20000
Systemax
21972
Tagar Systems 21972
Tatung
20041
Teac
20041, 20000
Technics
20162, 20035
Teknika
20037, 20035,
20000
Thomas
20000
Tivo
21503, 20739,
20636, 20618
TMK
20240, 20208,
20036
Toshiba
21972, 21503,
21008, 20212,
20210, 20209,
20066, 20045,
20043
Totevision
20240, 20037
Touch
21972
Unitech
20240
Vector
20045
Vector Research 20040, 20038
Video Concepts 20061, 20045,
20040
Videomagic
20037
Videosonic
20240
Viewsonic
21972
Villain
20000
Voodoo
21972
Wards
20760, 20240,
20212, 20149,
20081, 20072,
20062, 20060,
20048, 20047,
20042, 20035,
20000
White
20637, 20209, 20072
Westinghouse
XR-1000
20072, 20035,
20000
Yamaha
20038
Zenith
21139, 20637,
20479, 20209,
20039, 20034,
20033, 20000
ZT Group
21972
76
Appendices
Appendix E: Troubleshooting
TV Reset Comparison Guide
You can resolve many common TV problems using the reset functions described in the following table. See also the troubleshooting suggestions later in this appendix.
IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast
channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings. If most other channels from the same input seem correct, there is likely a problem with the broadcast rather than with the TV. Use care in this case, as changes you make to fix problems on individual channels also affect all other channels on the same input.
Reset Name Format
PerfectColorTM and PerfecTintTM Reset (for the single input currently being watched)
A/V Memory Reset (for the single input currently being watched)
A/V Reset (for all inputs)
Channel Memorization
When to Use
How to Use
Resulting Action
When the picture shape seems incorrect, use FORMAT to change the shape of the picture.
Press the FORMAT key to cycle through the available formats to find the best format for the current picture.
The last-used format for a signal type is memorized for each input. The next time the same input and the same signal type is viewed, the last-used format will be recalled.
When the color
1. While viewing the input to be
All PerfectColor/PerfecTint
intensities seem
reset, press MENU to display the sliders are reset to the
out of balance, use
Main menu with the A/V icon original center position. The
the PerfectColor/
highlighted.
PefectColor/PerfecTint
PerfecTint reset
2. Use to highlight PerfectColor settings for other inputs remain
to reset the color
and press ENTER to display the
unchanged.
balances to the original
PerfectColor adjustment screen.
factory settings. Both PerfectColor and
3. Press CANCEL to reset the colors.
PerfecTint and are
reset at the same time.
When audio and/or video settings for a single input seem incorrect, use A/V Memory Reset to return the input to the original factory settings.
1. While viewing the input to be reset, press MENU to display the Main menu with the A/V icon highlighted.
2. Use to highlight the Reset icon and press ENTER to reset.
All Video and all Audio (except Balance, Listen To, & Language) settings for an individual input are reset. In addition, two global settings (Video Noise & SharpEdge) are reset to their original factory settings.
To reset audio and video adjustments for ALL inputs back to their original factory settings.
While viewing the TV, press the side All Audio and Video settings are
panel buttons GUIDE and FORMAT at the returned to their original factory
same time.
settings.
To erase and re-
1. While viewing the TV, press MENU All previously memorized
memorize channels on
to display the Main menu.
channels for the selected
ANT 1 or Ant 2.
2. Press to highlight the Setup antenna input are erased and a
icon.
new set of memorized channels
3. Press to highlight the Scan is created. All custom settings
icon.
for Fav, channel names, and
4. Press to highlight the antenna channel locks are deleted. To
input and reception mode, e.g. add or delete individual channels,
ANT 1 Air.
see Edit menu instructions in
5. Press to highlight the Start chapter 5, "TV Menu Settings."
button icon and press ENTER to
start the memorization.
Appendices
77
Appendix E: Troubleshooting, continued
Reset Name Lock Menu Pass Code Side Panel Lock Release
System Reset
TV Reset IMPORTANT: Use this reset only if all other resets have been unsuccessful.
When to Use
To change your Lock menu pass code
To re-enable the side panel controls after activation of the Side Panel Lock
How to Use See the cutout page in Appendix A.
Press and hold the MENU button on the side panel for over eight seconds.
Resulting Action
Allows a new code to be established.
Allows the side panel controls to be unlocked if the remote control is misplaced.
If the TV does not turn on or off, does not respond to the remote control or side panel buttons, or has audio but no video.
To reset all consumeraccessible settings and all memories to the original factory defaults.
CAUTION: All ownerperformed setups and adjustments will be erased.
Press the SYSTEM RESET button on the side panel with a pointed object such as the point of pencil or end tip of a paperclip.
The TV will turn off and the blue LED will flash quickly for about one minute. When the blue LED stops flashing, you may turn on the TV. The changes you made most recently, before using SYSTEM RESET, may be lost. Changes you made previously, however, are not lost.
1. While viewing the TV, press MENU The TV will start the initialization
to display the TV Main menu. process. The TV will then turn
2. With the Main menu displayed, off and the front blue LED will
press number keys 1 2 3 to
start flashing. When the LED
display the Reset menu.
stops flashing (about. 1 min.), you
3.
READ THE ON-SCREEN WARNING AND INSTRUCTIONS. · If you do not wish to use this
reset, press EXIT or MENU to back out.
can turn the TV on again. The Parental Lock Pass code will remain unaffected, but all other memories and settings outlined in this Owner's Guide will need to be set again.
· If you do wish to use the
reset, press ENTER to erase all
memories and settings.
Service and Support
Service If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or Mitsubishi Consumer Relations at (800) 332-2119.
· DO NOT adjust any controls other than those described in this Owner's Guide.
· DO NOT remove the protective back cover of your TV.
Support · To order replacement or additional remote controls
or Owner's Guides, visit our website at www.mitsuparts.com or call (800) 553-7278.
· For questions: Call Consumer Relations at 800-332-2119. E-mail: MDEAservice@mdea.com
78
Appendices
Appendix E: Troubleshooting, continued
General TV Operation Symptom 1. The TV remote control does not work.
Remarks
· Check that the batteries are fresh and installed correctly. · Check that the slide switch on the remote is set to TV. · Be no more than 20 feet from the TV when using the remote
control. · Program remote control to operate the TV or other device. · Reset the remote control.
2. The TV remote POWER key blinks five times. Batteries in the remote are low and should be replaced.
3. TV does not respond to the remote control or Use the System Reset button. to side panel controls and TV will not power on or off.
4. When a device is selected from the Input
· Make sure the selected device is turned on.
Selection menu, the screen is blue (no signal · If the device is a VCR, begin play of the VCR.
source).
5. You have forgotten your Lock menu pass code. See Appendix A, Bypassing the Parental Lock.
6. Rating restrictions are not working.
Open the Parental Lock menu and: · Verify that the U.S. Ratings or Other Ratings setting is On. · Check the Lock Time/Unlock Time to check if rating restric-
tions are disabled. · Rating restrictions apply only to content on ANT 1 and ANT
2, INPUT 13.
7. On-screen displays appear each time you change a function.
Normal TV operation.
TV Channels Symptom 1. The TV takes several seconds to respond to
channel changes.
2. You cannot access a channel.
3. Name options are not available for some channels.
4. When ChannelViewTM list is displayed, information appears incomplete
Remarks
· It is normal for digital channels to take longer to tune in. · Press ENTER after a entering channel number to avoid delays. · Use a 4-digit number for an over-the-air digital channel. · Use a 6-digit number for digital cable channels if your cable
service is able to recognize 6-digit channel numbers.
· Use number keys instead of CH/PAGE / . · Be sure the channel you want to view is in memory. See
Setup > Scan in chapter 5, "TV Menu Settings." · Check that the TV is switched to the correct device or
antenna for that channel by pressing the INPUT key. · Make sure Channel Lock is off. · Make sure the Lock > Parent menu lock is set to off. · If you cannot tune to a virtual digital channel even though
the TV has already memorized digital channels, tune to the physical channel number used by the broadcaster. The virtual channel will then be automatically added to memory.
You can name only memorized analog channels and memorized digital channels not named by the broadcaster or TV Guide Daily.
· Available information is sent from the broadcaster or cable provider. No other data is available.
· Make sure the TV clock is set correctly.
Appendices
79
Appendix E: Troubleshooting, continued
TV Power On/Off Symptom 1. TV takes an excessively long time to power
on.
2. You cannot program the TV to turn on automatically (Timer function).
3. The TV will not turn on after being plugged in.
4. TV turned itself off and the light on the front panel started to blink.
5. TV will not power off.
Remarks
· When switched on, the TV needs time to boot up, just as a computer does.
· TV Energy Mode is set to Low Power. Change TV Energy Mode to Fast Power On in the Setup menu.
· The TV may be locked. · The clock may not be set. · TV Energy Mode is set to Low Power. Change to Fast
Power On in Setup menu.
If light on front panel is blinking, wait for at least one minute for the light to turn off, then press POWER again.
· Momentary power fluctuation caused the TV to turn off to prevent damage. Wait for the blue light to stop flashing and turn the TV on again.
· If the TV does not stay on, use the System Reset button on the side panel. If this happens frequently, obtain an AC line power conditioner/surge protector.
· An unusual digital signal may have been received, triggering a protection circuit. Wait for the light to stop flashing and turn TV on.
Use the System Reset button or unplug the TV, wait a few seconds, then plug in the TV.
Picture Symptom 1. Picture does not look like a high-definition
picture.
2. Picture has become dimmer.
3. There is a large black or gray rectangle on the screen.
4. You cannot view a picture when playing a VHS tape.
5. VCR or DVD player's on-screen menus jitter up and down.
6. When viewing a stopped VCR, white lines are rolling on the screen.
7. A color program appears as a black and white image, or the colors are dim, or the screen is black.
Remarks
Not all signals are high-definition signals. To receive high-definition programming from your cable or satellite provider, you must subscribe to the provider's high-definition service. Some overthe-air broadcasts are in high-definition and can be received with a high-quality antenna suited to your location.
Adjust the backlight setting. Press VIDEO repeatedly to display the backlight settings, then use to change the setting.
The TV's analog closed captioning has been set to "text" mode in the Captions menu. Turn off because there is no text information being broadcast.
Check your VCR's owner's guide for further troubleshooting.
Possible cause: Many VCRs and DVD players provide onscreen menus at only half-resolution. These lower-resolution graphics may appear to jitter up and down when the TV converts them to high-definition graphics.
· Turn off video mute for the VCR. · Begin playing the tape. · Change the viewing source to ANT 1 to watch TV.
· The PerfectColorTM color balance has been incorrectly set. Reset the PerfectColor balance.
· If watching a program on a component video input, make sure the red and blue cables are plugged in.
· If watching a program on an S-Video input, check the connectors for bent pins.
80
Appendices
Appendix E: Troubleshooting, continued
Picture
Symptom
8. Picture from an HDMI input is noisy (poor quality).
9. The image from a computer appears distorted when viewed on the TV.
Remarks
Upgrade a Category 1 (unmarked) HDMI cable to a Category 2 HDMI cable.
Normal TV operation. The TV does not correct distortion in the picture from a computer because the correction process may cause the edges of the image to be cut off. Press FORMAT on the TV remote control to adjust the size.
Sound (see also NetCommand troubleshooting for A/V receiver setup)
Symptom
Remarks
1. There is no sound even when the volume is turned up.
· Check if the MUTE key is on. · The TV's "Listen to:" setting may be set to SAP. · Check that the Speakers option is set to TV to hear sound from the
TV speakers instead of the AVR. · If using an A/V receiver, check that the Speakers option is set to AV
Receiver to hear sound from the A/V receiver speakers. · Perform a System Reset.
2. The sound does not match the screen picture.
· The TV's Listen to: setting may be set to SAP. · If using stereo or A/V receiver speakers, check their input selec-
tion in the Inputs > AVR menu. NetCommand® is set up incorrectly for the A/V receiver. · If using stereo or A/V receiver, check that DIGITAL AUDIO OUT and/or AVR AUDIO OUTPUT on TV's back panel is connected to the A/V receiver.
Indicators Symptom 1. STATUS indicator light is a steady/flash-
ing red.
Remarks
· Unplug set from AC power. Plug back in and wait one minute for blinking to stop.
· Press SYSTEM RESET button on side panel and wait for blinking to stop.
· If blinking continues, service is required. Contact your dealer or a Mitsubishi Authorized Service Center to arrange for a service evaluation. Listings of Mitsubishi Authorized Service locations can be obtained from our web site, www.mitsubishi-tv.com or by calling 1-800-332-2119.
Appendices
81
Appendix E: Troubleshooting, continued
NetCommand Symptom 1. Cannot see the menu from the A/V Receiver.
2. NetCommand unable to learn specific device keys.
3. The A/V Receiver is the selected audio source but there is no sound.
4. There is no sound when I switch to the A/V receiver using the Speaker setting in the AV menu, even though I have physically connected the TV to the A/V receiver and learned IR codes for the receiver inputs.
5. There is no sound from the A/V receiver for my DVD player or other surround sound device even though I learned the IR code for the A/V receiver's DVD input or other input.
6. I've selected my DVD player or other surround sound device in combination with the TV speakers but hear no sound from the TV speakers.
7. I "learned" the RECORD key for my VCR/ DVR but when I pressed the RECORD key, the VCR/DVR did not record anything.
Remarks
The A/V Receiver is not connected to any video input of the TV. To check the A/V Receiver menu, temporarily plug into an unused input of the TV, such as Input 3. Exit the Auto Input Sensing screen and highlight Input 3 from the Input Selection menu. Press MENU on the A/V receiver remote control.
· Device does not use IR format for remote control signal. ITT and RF formats cannot be learned.
· Room lighting may affect the signal. Have the remotes very close (6 inches or less) to the TV during Learning.
· If learning from a Mitsubishi remote control, make sure slide switch is not set to TV position.
· Some, but not all, device key functions can be learned by NetCommand. For example, POWER and PLAY may be learned, but other functions may not.
· The signal from the remote control may not be strong enough. Insert fresh batteries and try Learning again.
· Check to see if the A/V Receiver power is turned on. · With the power turned on, redisplay the Input Selection
menu and press ENTER to allow NetCommand to correctly select the A/V Receiver input. · Incorrect setup in the Inputs > AVR menu. Check the device connection assigned in the AVR menu.
Wrong input or no input was assigned in the AV Receiver Learn screen. All audio should go to the A/V receiver as audio output from the TV unless the device's audio is connected directly to the A/V receiver. See chapter 6, "NetCommand," and perform the procedure to select the correct A/V receiver input.
NetCommand A/V receiver setup for the DVD player or digital surround sound device or other device is not switching properly. See chapter 6, "NetCommand," and perform A/V receiver setup for a digital surround sound device.
If you have only an audio connection from the device to the A/V receiver, a physical audio connection from the device to the TV is also required. · Connect the left and right audio output from the device to the
appropriate TV audio input. Now you can hear audio from the device through either the TV speakers or the A/V receiver. · To switch audio sources, press AUDIO, press to show the Speakers option, then press to select AV Receiver or TV. · If using an HDMI connection, you may need to set the audio output of the device to PCM AUDIO, as the TV is unable to decode other digital surround sound audio received on HDMI.
Check that the VCR or DVR is receiving a signal directly from your cable box or satellite receiver.
82
Trademark and License Information
Trademark and License Information
LICENSOR'S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
CableCARDTM is a trademark of Cable Television Laboratories, Inc.
Manufactured under license from Dolby Laboratories. Dolby is a trademark of Dolby Laboratories.
HDMITM the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly prohibited.
This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
The
logo and the words "SimplayTM" and "Simplay HDTM" are the trademarks of Silicon Image, Inc.
In the United States, TV Guide and other related marks are registered marks of Gemstar-TV Guide International, Inc. and/or one of its affiliates.
The TV Guide Daily system is manufactured under license from Gemstar-TV Guide International, Inc. and/or one of its affiliates.
The TV Guide Daily system is protected by one or more of the following United States patents 4,908,713; 6,498,895; 6,850,693; 6,396,546; 5,940,073; 6,239,794 to Gemstar-TV Guide International, Inc. and/or its subsidiaries.
Gemstar-TV Guide International, Inc. and/or its related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the TV Guide Daily system and cannot guarantee service availability in your area. In no event shall Gemstar-TV Guide International, Inc. and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the TV Guide Daily system.
x.v.Color and the x.v.Color logo are trademarks of Sony Corporation.
ChannelViewTM, DeepFieldTM Imager, Easy ConnectTM, NetCommand®, PerfectColorTM, PerfecTintTM, Plush 1080p®, QuickViewTM, SharpEdgeTM, Smooth120HzTM are trademarks of Mitsubishi Digital Electronics America, Inc.
Trademark and License Information
83
Mitsubishi TV Software
END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE
IMPORTANT READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television ("Software"). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
The Software is protected by United States copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. The Software is licensed, not sold.
1. LICENSE GRANT. MDEA grants you a non-exclusive, non-transferable, limited right and license to use one copy of the Software only with the Mitsubishi television model that included this owner's guide and owned by you.
2. RIGHTS AND LIMITATIONS.
Software Not for Resale. You may not resell or otherwise transfer for value the Software, except in conjunction with a sale of the TV that Software has been pre installed.
Prohibition on Reverse Engineering, Decompilation and Disassembly. The Software contains trade secrets or other proprietary material in its human perceivable form and to protect them, you may not reverse engineer, decompile, or disassemble, or otherwise reduce the Software to any human perceivable form, except to the extent that the foregoing restriction is expressly prohibited by applicable law.
Separation of Components. The Software is licensed as a single product. Its component parts may not be separated for use on more than one TV.
No Rental. You may not rent, lease, lend, or sublicense the Software.
Trademarks. This License Agreement does not grant you any rights to any trademarks of MDEA.
3. VIOLATIONS. You understand that any use, copying or transfer of the Software, except as permitted pursuant to this License, may subject you to serious criminal and civil penalties including damages and an award to MDEA of attorneys' fees in connection with any violation of this License. You further understand that you may be held legally responsible for any copyright infringement or other violation of intellectual property rights that is caused, encouraged, or induced by your failure to abide by the terms of the License. This license is effective until terminated, and will terminate immediately without notice from MDEA or judicial resolution if you fail to comply with any provision of this License.
4. COPYRIGHT. All title and intellectual property rights in and to the Software (including but not limited to any images, photographs, animations, video, audio, music, text, and "applets" incorporated into the Software), and any accompanying printed materials are owned by or licensed to MDEA. All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This License Agreement grants you no rights to use such content, except that you own the media on which the Software is recorded, but MDEA and its licensors retain ownership of the Software itself. All rights not expressly granted are reserved by MDEA.
5. EXPORT RESTRICTIONS. MDEA is licensing the Software for use within the United States. You agree that you will not export or re-export the Software. You specifically agree not to export or re-export the Software: (i) to any country to which the U.S. has embargoed or restricted the export of goods or services, which currently include, but are not necessarily limited to Cuba, Iran, Iraq, Libya, North Korea, Sudan, and Syria, or to any national of any such country, wherever located, who intends to transmit or transport the Software back to such country; (ii) to any person or entity who you know or have reason to know will utilize the Software in the design, development, or production of nuclear, chemical, or biological weapons; or (iii) to any person or entity who has been prohibited from participating in U.S. export transactions by any federal agency of the U.S. government. You warrant and represent that neither the BXA nor any other U.S. federal agency has suspended, revoked, or denied your export privileges.
6. DISCLAIMER OF WARRANTY. EXCEPT AS OTHERWISE PROVIDED IN THIS LICENSE OR IN THE LIMITED WARRANTY APPLICABLE TO THE TV, MDEA MAKES NO OTHER WARRANTIES OF ANY KIND WHATSOEVER REGARDING THE SOFTWARE AND HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE. ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED BY MDEA. IN NO EVENT SHALL MDEA BE LIABLE TO YOU OR ANY THIRD PARTIES, IN CONTRACT, IN TORT OR OTHERWISE, FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
7. LIMITATION OF LIABILITY. MDEA SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE TO YOU OR ANY THIRD PARTIES FOR ANY DAMAGES OF ANY NATURE, WHETHER INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOST PROFITS, LOSS OF GOOD WILL OR EXPENDITURES MADE OR COMMITTED FOR IN RELIANCE ON THE CONTINUATION OF THIS LICENSE. YOU AGREE THAT NEITHER MDEA'S BREACH OF THIS LICENSE NOR ITS FAILURE TO REPAIR A DEFECT, ERROR OR BUG SHALL CONSTITUTE A FAILURE OF THE ESSENTIAL PURPOSE OF THIS LICENSE. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. MDEA's liability to you for direct damages for any cause whatsoever and regardless of the form of the action, will be limited to the money paid by you for the TV (based on fair market value of the TV) that caused the damages.
8. GENERAL. This License Agreement will be governed by the laws of the State of California.
WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
84
MITSUBISHI LCD FLAT PANEL HDTV LIMITED WARRANTY
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. ("MDEA") warrants to the original purchaser of this LCD Flat Panel HDTV that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of improper workmanship and/or material:
a. Parts. All parts (except any software incorporated into this HDTV are warranted for a period of one year from the date of the original purchase at retail. We will repair or replace, at our option, any defective part without charge for the part. Parts used for replacement may be replaced with those of like kind and quality and may be new or remanufactured. Parts used for replacement are warranted for the remainder of the original warranty period.
b. Embedded Software. MDEA warrants that all software incorporated into this HDTV (the "Embedded Software") will perform in accordance with the functional description of Embedded Software in all material respects, but MDEA does not warrant that the Embedded Software is error-free. MDEA also does not warrant that the Embedded Software will be compatible under IEEE 1394 AV/C and HAVi software standards with products produced by any other manufacturer. The warranty contained in this section shall continue for a period of one year, from the date of the original purchase from the dealer. If, after prompt notice within the warranty period, MDEA determines that the Embedded Software has failed to perform in accordance with such functional description in all material respects and if such failure is not due to accident, misuse, modification or misapplication of the Embedded Software, then MDEA shall modify or replace the nonconforming Embedded Software at no charge to you, which at MDEA's sole discretion may be fulfilled by means of modification or replacement software contained on a replacement memory card for Customer installation. The foregoing shall be MDEA's sole obligation to you under this limited warranty. All rights under this limited warranty on the Embedded Software also subject to your compliance with the terms of the Software License Agreement applicable to this HDTV, and this limited warranty on the Embedded Software shall be null and void if the Embedded Software is modified or changed in any manner except as specifically authorized by MDEA.
c. Labor. For certain items that are designed to be replaced by the consumer, including (but not limited to) some Embedded Software, the consumer is solely responsible for any replacement labor. For all other parts, we will provide the labor for a warranty repair by an authorized MITSUBISHI service center without charge for one year from the original date of purchase at retail.
d. Notice. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the applicable warranty time period.
BEFORE REQUESTING SERVICE, please review the TV owner's guide to insure proper installation and correct customer control adjustment. If the problem persists, please arrange for warranty service.
1. TO OBTAIN WARRANTY SERVICE:
a. Contact your nearest authorized MITSUBISHI service center whose name and address can be obtained from your MITSUBISHI dealer, by writing to the address provided below, calling MDEA at 800-332-2119, or using the support feature of our website at www.Mitsubishi-tv.com.
b. Warranty service will be provided in your home or, if required, at an authorized service shop, provided that your television is located within the geographic territory customarily covered by an authorized MITSUBISHI service center. If not, you must either deliver your television to an authorized service location at your own expense, or pay for any travel and/or transportation costs the service center may charge to and from you home. Actual service labor will be provided without charge.
c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you.
2. THIS LIMITED WARRANTY DOES NOT COVER:
a. Up to .01% pixel outages (small dot picture elements that are dark or incorrectly illuminated).
b. Cosmetic damage or any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the product (or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner's Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by electrical system or damages caused by use of third party mounting brackets or stands. This limited warranty also excludes service calls where no defect in the product covered under this warranty is found, service calls related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages
85
arising from product installation, removal from or re-installation into custom installations or on wall mountings, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U.S.A.
Please consult the operating instructions contained in the Owner's Guide furnished with the product for information regarding user controls.
3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR.
4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE.
5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so the above limitations or exclusions may not apply to you.
6. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
7. In the event of any dispute under this limited warranty, jurisdiction and venue for resolving that dispute will be in the state where the television was purchased and the laws of such state will govern.
In no event shall Mitsubishi have any liability, including without limitation, for general, consequential, incidental, or special damages for loss, destruction, damage or corruption of recorded data, media or software resulting from use of this television, or cost of recovery of lost data, media or software therefore.
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. 9351 Jeronimo Road Irvine, CA 92618-1904
86
Index
Index
A
A/V Memory Reset 76 A/V Receiver
Adding NetCommand Control 57, 58, 59
and the TV Speakers 40 and TV's Remote Control 57, 68
Audio Lock 69 Codes 70 Connecting 10, 26, 58 Controlling Sound Volume 15 A/V Reset 8, 76 Adjust Keys (Up/Down/Left/Right) 29, 37 Anamorphic Picture Format 34 Antenna Connecting 22 Antenna Inputs (ANT 1/MAIN, ANT 2/AUX) 9 Audio Lock 69 Audio Menu 40 Auto-off. See Sleep Timer Auto-on. See Timer Auto Input Sensing Description 6 TV Setup 14
B
Back Panel (described) 9, 10 Batteries 13 Blue Glow 38
C
CableCARD 16, 22 Channel Memorization 14, 42
Cable Box and TV's Remote Control 30, 68, 71 Connecting 20, 21, 25, 26
Cable Management 19 Cable Service (Direct) 22 Camcorder 27 Captions Menu 41 Channels. See also Fav
Add/Remove a Single Channel to Memory 42, 43
Changing 28 Channel Lock 43 Digital Channel Numbers 63 Memorizing (Scanning) 42 Naming 43 Physical/Virtual Channel Num-
bers 43 Status Display 32 Troubleshooting 78
ChannelView Channel Listings 31 Cleaning 4 Clock, Set Date and Time 44 Closed Captions 41 Color Adjustments 38, 39
Reset Color 38, 76 Component Inputs (Y Pb Pr) 8, 9 Computer
and Display Formats 18, 63 Connecting 17 Customer Service and Support 77
D
Date. See Clock Defaults, Resetting 76 Digital Audio Out 10 Dolby Digital 10, 26, 58, 63 DVD Player
and TV's Remote Control 30, 68, 72
Connecting 23 DVI Device, Connecting 23
E
Energy Mode 45
F
F1F4 Keys 30, 53 Fan Noise 4 Fast Power On 45 FAV (Favorite Channels) 33, 43 FORMAT Key 34 Freeze Picture 30
G
Game Component Inputs 8, 9 Game as Input Name 46 Picture Mode 39
GUIDE Key 29, 68 ChannelView 31 TV Guide Daily 65
H
HDMI Changing Out an HDMI Device 15 Connecting an HDMI Device 21 Disconnecting and the Input Selection Menu 46 HDMI Cable Categories 10 HDMI Jack 8, 10 NetCommand for HDMI Devices 7, 30, 68
HDTV Cable Box or Satellite Receiver with Component Video, Connecting 20
HD (High-Definition) Signal) 34
I
Indicator Lights 7 INFO Key
ChannelView 31 in TV Menus 37 USB Photo Menu 35 Input Jacks (Standard Audio/Video) 8, 10 Input Selection Menu Choose Viewing Source 28 Icon Order 46 INPUT Key 29 IR (infrared) Emitter Placement (NetCommand) 52
J
JPEG Photo Files 35
L
Language in Digital Programs 40 Language for Menus 42 SAP (Second Audio Program) 40
Learn. See NetCommand Letter Box Image Display 34 Lock Menu. See Lock TV Lock TV
Bypassing the Lock 61 Lock by Channel 43 Lock by Ratings 49 Lock by Time 50 Preset V-Chip Blocking 48 Low Power (Energy Mode) 45
M
Media Setup Menu 36 Memorizing Channels 14 Mute
MUTE key 29 Video Mute 38
N
NetCommand A/V Receiver Control 57 Compared to Programming the Remote Control 68 Description 51 Initial Setup for Most Devices 53 NetCommand for HDMI Devices 7, 30, 68 Operating 55, 56 Specialized Device Keys 54 Troubleshooting 81
Noise, Video 38
O
120-Hz Picture Processing 6, 38
Index
87
P
Parent Menu 49 Pass Code
Resetting 61 Setting 48 PAUSE Key 30 PerfectColor 38 PerfectTint 38 Photo Viewing 36 Picture AV Menu Controls 38 Picture Quality and Film Mode
38 Troubleshooting 79 Picture Mode 39 Power Consumption Energy Mode 45 Power On/Off 13 Troubleshooting 79
Q
QV Key (QuickViewTM) 29 and FAV Key 33
R
Remote Control Keys and Functions 29, 30 Programming Codes (reference chart) 70 Programming Instructions 69 Programming vs. NetCommand "Learning" 68 Reset 30
Reset A/V Reset (all settings) 8 AV Menu Reset (by input) 38 Color 76 Pass Code 61 Remote Control 30 Remote Control Audio Lock 69 System Reset 8 TV Reset Comparison Guide 76
S
S-Video 10 Connecting an S-Video Device 21
Safeguards 5 SAP (second audio program) 32, 40 Satellite Receiver
and the Remote Control 68 Connecting 20, 21 Scan Channels 14, 42 SD (Standard-Definition Signal) 34 Side Panel 8 Side Panel Lock 45, 50
Signal Definitions 34 Sleep Timer (auto-off) 28 Smooth 120hz 6, 38 Sound
Audio Settings 40 Controlling A/V Receiver Volume
15, 57 Simulated Stereo 40 Troubleshooting 80 Turn TV Speakers On/Off 40 Speakers Option In Audio Menu 40 Specifications, TV 63 Standard-Definition Signal 34 Stand Removal 11 Status Display 32 Stereo System. See A/V Receiver Surround Sound 9, 10, 26, 59 Simulated 40 System Reset 8, 77
W
Wall Mount Kit 11
X
x.v.Color 10, 21, 39
Z
ZIP code 47
T
Time. See Clock Timer
Sleep Timer (auto-off) 28 TV Timer (auto-on) 45 Time Zone. See Clock Troubleshooting 76 TV Guide Daily Access Requirements 4 Channel Memorization 42 Connection Requirements 24, 47 Customize Guide Listings 65 Description 7 GUIDE Key 29 Modify Guide Setup 66 Navigating the Guide 65 Screen Elements 64 Setup 47, 64 Troubleshooting 67 TV Energy Mode 45 Use 64
V
V-Chip Ratings Applying Restrictions 48 Definitions 49 In Status Display 32
VCR Connecting 10, 24, 25 Troubleshooting 79
Video from a Digital Camera 36 Video Game. See Game Video Menu 39 Viewing Device. See Input Selection
Menu
Website:
www.mitsubishi-tv.com
E-mail:
MDEAservice@mdea.com
For questions, call Consumer Relations at 800-332-2119
To order replacement or additional remote controls or Owner's Guides Visit our website www.mitsuparts.com
or call 800-553-7278
SYSTEM RESET If the TV does not respond to the remote control, front panel controls, or will not power on/off, press the SYSTEM RESET button on the side panel with a pointed object, such as the point of a pencil or end tip of a paperclip.
The LED will flash quickly for about one minute. When the LED stops flashing, you may turn on the TV. Settings changes you made most recently, before using SYSTEM RESET, may be lost.
© 2007 Mitsubishi Digital Electronics America, Inc. 853B542A50
Written and Printed in U.S.A. VLP38++
Adobe PDF Library 7.0 Adobe InDesign CS2 (4.0.4)