Wantek Wireless Headphones User Manual
Version: English
Schematic
Diagram showing the Wantek headphones with labels for:
- Microphone angle adjustment
- Coding switch
- Multi-function button
Operation Instructions
- Long press the multi-function button (MFB) to turn on the headset. The headset enters pairing mode. The pairing name is T2L. Turn on Bluetooth on your mobile phone and click T2L to link the headset.
Music Control
- The MFB controls music play/pause and call answering/hanging up. Rotate the encoder switch clockwise to increase volume and counterclockwise to decrease volume.
- Press the rotary encoder switch clockwise to control the next song. Press the rotary encoder switch counterclockwise to control the previous song.
- Long press the encoding switch and release after hearing the prompt tone to start the voice assistant. Click to exit.
Lighting Control
- Double-click the coding switch to turn the headphone light off and on.
- During charging, the LED is on. The LED is off when fully charged.
- Click the MFB three times to redial the last number.
Microphone Mute Control
- Lift the microphone boom to the top to mute the microphone. The other party cannot hear your sound. Lower the microphone boom to cancel mute, and the microphone can be used normally.
Headphone Cable Use
- It is recommended to use the headphone cable after turning off the headphones to prevent power consumption.
