Reolink Video Doorbell WiFi / PoE

What's in the Box

The package includes the following items:

• Doorbell
• Chime
• Corner Wedge
• Mounting Plate
• Mounting Hole Template
• 1m Ethernet Cable
• Extension Cable
• Jumper Cable
• Power Adapter*
• Power Extension Cable*
• Pack of Screws
• Quick Start Guide

*Note: The Reolink Video Doorbell PoE does not include a power adapter and power extension cable.

Doorbell Introduction

Video Doorbell PoE

The Reolink Video Doorbell PoE features the following components:

• Built-in Mic
• Lens
• Daylight Sensor
• Status LED
• Micro SD Card Slot
• PoE Port
• Reset Button
• Wiring Screws

[Diagram illustrating the Reolink Video Doorbell PoE, showing the location of the built-in microphone, lens, daylight sensor, status LED, micro SD card slot, PoE port, reset button, and wiring screws.]

Video Doorbell WiFi

The Reolink Video Doorbell WiFi features the following components:

• Built-in Mic
• Lens
• Daylight Sensor
• Status LED
• Micro SD Card Slot
• LAN Port
• Reset Button
• Wiring Screws

[Diagram illustrating the Reolink Video Doorbell WiFi, showing the location of the built-in microphone, lens, daylight sensor, status LED, micro SD card slot, LAN port, reset button, and wiring screws.]

Set up the Doorbell

Set up the Doorbell on Phone

Step 1: Scan the QR code to download the Reolink App from the App Store or Google Play Store. [QR Code for App Download]

If the Reolink App is already installed, please check if it is the latest version and update if necessary.

Step 2: Power on the video doorbell.

• PoE Version: Connect the doorbell to a PoE Switch/Injector or Reolink PoE NVR for power. (Note: PoE Switch/Injector and Reolink PoE NVR are not included in the package). [Diagram showing a PoE Switch connected to a Router and the doorbell connected via Ethernet to the PoE Switch.]
• WiFi Version: Connect the power cable to the screws on the back of the doorbell, then power it on using the power adapter. [Diagram showing the WiFi doorbell connected to a power adapter.]

Ensure that the Y-shaped power connectors are kept separate from each other.

Step 3: Launch the Reolink App. Tap the [Plus Icon] button in the top right corner and scan the QR code on the doorbell to add it.

Step 4: Follow the on-screen instructions to complete the initial setup.

Set up the Doorbell on PC (Optional)

Step 1: Download and install the Reolink Client.

Step 2: Power on the video doorbell.

Step 3: Launch the Reolink Client. Click the [Add Device Button] and enter the doorbell's UID number to add it.

Step 4: Follow the on-screen instructions to complete the initial setup.

Set up the Chime

Step 1: Plug in the Chime and press the button on your doorbell.

Step 2: Follow the on-screen instructions to complete the initial setup.

[Diagram showing the chime being plugged in and a button on the doorbell.]

Chime Pairing

To pair the chime with the doorbell:

1. Power off the chime.
2. Power on the chime while pressing the setting button to activate pairing mode. Continue pressing the button for 5 seconds until the chime's status LED turns on.
3. Press the doorbell button once. The chime will be successfully paired if its status LED flashes twice and it beeps twice.

The chime is synchronized with the doorbell by default. If you wish to use two or more chimes for one doorbell, you will need to synchronize the chimes manually.

Install the Doorbell

Reolink Video Doorbell PoE

Step 1: Place the mounting hole template on the wall next to the door and drill holes as indicated.

Step 2: Install the mounting plate using the provided long screws through the two holes. [Diagram showing the mounting plate being attached to the wall with screws.]

Step 3: Run the Ethernet cable through the mounting plate and the hole in the wall. Connect it to the doorbell, then attach the doorbell to the mounting plate.

Step 4: Power the doorbell by connecting the other end of the Ethernet cable to a PoE device. [Diagram illustrating the Ethernet cable connection for PoE power.]

Reolink Video Doorbell WiFi

Step 1: Place the mounting hole template on the wall next to the door and drill holes as indicated.

Step 2: Install the mounting plate using the provided long screws through the two holes. [Diagram showing the mounting plate being attached to the wall with screws.]

Step 3: Run the power adapter through the mounting plate and the hole in the wall to connect it to the doorbell, then attach the doorbell to the mounting plate.

Step 4: Plug the power adapter into a socket near the door. Use the long power extension cable if the socket is too far from your doorbell. [Diagram showing the power adapter connection for the WiFi doorbell.]

Reolink Video Doorbell PoE and WiFi can also be powered by the existing doorbell wiring system. In such cases, you must first bypass the existing mechanical chime using a jumper cable to ensure sufficient power. Insufficient power may cause the doorbell to restart, have an unstable connection, and the mechanical chime may vibrate and generate noise. Use the extension cable to lengthen the existing power cable for the doorbell as shown below. After installation, the existing mechanical chime will no longer ring. [Diagram illustrating the connection to an existing doorbell transformer and mechanical chime, showing the use of a jumper cable and extension cable.]

Adjusting the Doorbell Angle

If you need to adjust the angle of the doorbell, you can use the provided wedges. (Example shown for Reolink Video Doorbell PoE)

Step 1: Place the mounting hole template on the wall and drill holes as shown.

Step 2: Install the wedge using the provided screws through the two holes. Ensure the notched side of the wedge faces outwards.

Step 3: Screw the mounting plate onto the wedge.

Step 4: Run the Ethernet cable through the wedge and mounting plate, and attach the doorbell to the plate. [Diagram showing the wedge installation and cable routing.]

Remove the Doorbell

If you wish to remove the doorbell from the mounting plate, you can use the reset pin to gently push the bottom. [Diagram showing how to use a pin to release the doorbell from the mounting plate.]

Specifications

Hardware Features

• Field of View: 133.6° Horizontal, 97.3° Vertical, 180.4° Diagonal
• Dimension: 133 x 48 x 23mm
• Weight: 96g

Notification of Compliance

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Exposure Warning Statements

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator and body.

Simplified EU Declaration of Conformity

Reolink declares that the WiFi camera is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The PoE camera is in compliance with Directive 2014/30/EU. [CE Mark] [Simplified EU Declaration of Conformity text]

Product Disposal, Warranty, and Terms

Correct Disposal of This Product

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. [Recycling Symbol]

Limited Warranty

This product comes with a 2-year limited warranty, valid only if purchased from the Reolink Official Store or a Reolink authorized reseller.

We hope you enjoy your new purchase. However, if you are not satisfied with the product and plan to return it, we strongly suggest resetting the camera to factory default settings before returning.

Terms and Privacy

Use of the product is subject to your agreement to the Terms of Service and Privacy Policy. Keep out of reach of children.

Legal Information

End User License Agreement

By using the Product Software embedded in the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink.

ISED Statements (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

[French translation of ISED statements]

RF Exposure Declaration for IC

The device has been evaluated to meet general RF exposure requirements. The device may be used in mobile exposure conditions. The minimum separation distance is 20cm.