FLAMMA FW10 Wireless System Owner's Manual
Precautions
*PLEASE READ CAREFULLY BEFORE PROCEEDING*
Power Supply
720mAh rechargeable lithium battery for power supply. Please utilize the USB cable that comes with the unit for charging.
Location
To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:
- Direct sunlight
- Magnetic fields
- Excessive dusty or dirty location
- Strong vibrations or shocks
- Heat sources
- Extreme temperature or humidity
- High humidity or moisture
Radio Frequency Interference
The FW10 is based on 2.4 GHz radio frequency data transmitting. Similar devices with this technology can interfere when close. Please keep the receiver at least 3 meters away from other devices, such as a WiFi router, to avoid signal interference.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Main Features
- Complete wireless guitar system with 4 different channels.
- Less than 5ms signal latency.
- Signal transfer distance up to 45 feet.
- 5-hour long battery life with power saving design.
- Easy plug and play design with support for electric guitar and acoustic instruments with piezo-electric pickups.
- Lightweight, portable and compact size.
Layout
Transmitter
Shows the FLAMMA FW10 Transmitter unit from multiple angles.
Components:
- 01: Power Switch: A slider labeled "ON OFF".
- 02: Channel Switch: A slider labeled "CHANNEL" with positions indicated by bars.
- 03: USB Port: Labeled "5V USB", a standard USB port for charging.
- 04: Channel LED: Indicates the currently activated channel and battery life when powered on. The unit has channel indicators labeled A, B, C, D.
Receiver
Shows the FLAMMA FW10 Receiver unit from multiple angles.
Components:
- 01: Power Switch: A slider labeled "ON OFF".
- 02: Channel Switch: A slider labeled "CHANNEL" with positions indicated by bars.
- 03: USB Port: Labeled "5V USB", a standard USB port for charging.
- 04: Channel LED: Indicates the currently activated channel and battery life when powered on. The unit has channel indicators labeled A, B, C, D.
Quick Guide
Illustrates the connection setup for the FW10 Wireless System.
Setup:
- The TRANSMITTER plugs into an instrument (e.g., electric guitar). The diagram shows two guitar icons connected via a dashed line to the transmitter. The word "or" is placed between them.
- The RECEIVER plugs into an amplifier or stompbox. The diagram shows an amplifier icon and a stompbox icon connected via a dashed line to the receiver. The word "or" is placed between them.
- Dashed lines with arrows indicate wireless signal transmission from the Transmitter to the Receiver.
Steps:
- Plug the FW10 TRANSMITTER into your instrument. Plug the RECEIVER into the input of the amplifier or stompbox.
- Turn on the TRANSMITTER and RECEIVER.
- The default channel is Channel 1. Please set the TRANSMITTER and RECEIVER to the same channel.
- The LED light will stay green when the connection is stable. The LED light blinks when the connection is weak. Please change the current channel or check for electromagnetic interference to prevent signal interruption.
- Please utilize the USB cable that comes with the unit to charge.
Tips
Change Channel to Avoid Interference
The FW10 has 4 individual signal channels, allowing 4 pairs of Transmitter and Receiver to work simultaneously. The multi-channel design allows users to change to alternative channels when the connection becomes weak or is affected by electromagnetic interference.
Plug-and-Play
Users can simply power on the unit, plug in, and enjoy.
Multi-Receiver
The FW10 allows pairs of receivers to share one single transmitter. For example, users could utilize the FW10 to build a real stereo amplifier setup with one Transmitter and two Receivers plugged into two amplifiers; they should all be on the same channel.
Power Saving Mode
The FW10 will automatically change to Power Saving Mode after 10 seconds without receiving any signal, to save power and cut background noise. The FW10 will exit Power Saving Mode as soon as it receives a signal again.
Charge
The FW10 allows charging via a USB power supply. The cable included with the unit can be used to charge two devices simultaneously using the USB ports on your computer or through a wall charger. Low-quality third-party cables may cause charge issues.
Position
The angle of the Transmitter and Receiver can be adjusted to achieve the best result.
Antenna
The antenna is located at the bottom of the FW10. For best results, we recommend not covering the bottom of the unit.
Specifications
- Effective Distance: 15 meters
- Latency: Less than 5ms
- Frequency Response: 20-20KHz, +1dB/-3dB
- Total Harmonic Distortion: <0.05% (1KHz @-10dbFS)
- Input Dynamic: >103dB
- Frequency Band: 2.4GHz ISM Worldwide
- Working Temperature: -10 C to 50 C
- Bit Depth: 24bit
- Sample Rate: 48KHz
- Dimension: 117mm(D)*40mm(W)*25mm(H)
- Weight: 0.1005kg
- Accessories: USB cable, Safety Instruction & Warranty Card, Sticker, quick guide
