BEKA associates Ltd.Counters
Instruction Manual for beka models including: BA364G, BA367E, BA367E-SS, BA368E, BA364G Series Externally Powered Counters, BA364G Series, Externally Powered Counters, Powered Counters
Essential Health & Safety Requirements for loop powered 4/20mA indicators
File Info : application/pdf, 1 Pages, 926.27KB
DocumentDocumentDescription Field and panel mounting intrinsically safe externally powered digital counters with one or two inputs. Model BA364G BA367E BA367E-SS BA368E Mounting Field mounting Panel mounting Panel mounting Number of inputs 2 1 2 Digits 8 x 18mm high & 6 x 12mm high 8 x 9mm high & 6 x 6mm high 8 x 18mm high & 6 x 12mm high Enclosure material GRP IP66 Noryl IP66 front 316-Stainless Steel IP66 front Noryl IP66 front Panel cut-out mm N/A 90.0+0.5/-0 x 43.5 +0.5/-0 136.0+0.5/-0 x 66.2 +0.5/-0 Intrinsic safety Intrinsic safety IECEx, ATEX and UKEX gas and dust certification Code: II 1 G II 1 G II 2 D II 1 G II 2 D Ex ia IIC T5 Ga Ex ia IIC T5 Ga Ex ia IIIC T80°C Db Ex ia IIC T5 Ga Ex ia IIIC T80°C Db -40°C Ta +70°C -40°C Ta +60°C -40°C Ta +60°C -40°C Ta +70°C -40°C Ta +60°C BA367E & BA368E BA367E-SS BA364G Parameters: See certificates or full instruction manuals Special conditions for safe use All models When installed in Zone 0, installation shall be such that an ignition due to impact between aluminium label and iron/steel is excluded. For installation in a Ex e, Ex p or Ex t panel enclosure, all connections must be supplied via appropriate rated and approved equipment meeting input / output safety parameters of external connections. BA367E-SS When used in a Group IIIC conductive dust environments instrument terminals shall have at least IP6X protection in accordance with IEC 60079-0. BA364G When installed purely as intrinsic safety equipment the ambient temperature range is -40°C Ta +70°C. Cable entry devices and stoppers suitable for the intended use, location and protection concept shall be fitted to maintain the ingress protection of the enclosure. Essential Health & Safety Requirements for externally powered Counters BA364G, BA367E, BA367E-SS & BA368E UK BA368E BA367E PE BA367E-SS Manuals, certificates and datasheets can be downloaded from https://www.beka.co.uk/epc Issue 1 10th June 2024 BEKA associates Ltd. Old Charlton Rd, Hitchin, Hertfordshire, SG5 2DA, UK Tel: +44(0)1462 438301 e-mail: sales@beka.co.uk web: www.beka.co.uk Installation & connections: BA364G Four M6 clearance holes for surface mounting Pulse input A + Add link to energise pulse input A Pulse input b + Add link to energise pulse input b Optional A1 + 6 A2 5 4 A3 + 3 A4 10 9 4/20mA 8 7 output Alarm 1 1 2 Alarm 2 RS1 RS2 P1 C4 P2 C3 + C2 C1 Optional + Power supply External reset + Pulse output See full instruction manuals for dimensions Two M20 x 1.5 glands or plugs Installation: Panel mounting models BA367E and BA368E Align foot and body by turning screw anticlockwise Position gasket behind instrument bezel Insert panel clamp into recess and gently pull it onto the dovetail. Engage screw & turn clockwise to tighten clamp. 22cNm (1.95lbf in) max. Insert instrument into the panel from the front See full instruction manuals for dimensions Installation: Panel mounting model BA367E-SS 1 Panel clamp 3 22cNm (1.95lbf in) max. Finally fit protective caps. 2 See full instruction manuals for dimensions Connections: Panel mounting models BA367E and BA367E-SS A1 A2 + Alarm 1 A3 A4 + Alarm 2 Terminals for optional dual alarms OR P1 P2 OR C1 C2 C3 C4 + + Terminals for optional Terminals for pulse output optional 4/20mA output 12 + Power supply RS1 RS2 3 4 5 6 + Reset link to Pulse energise input pulse input E Only on BA367E-SS Connections: Panel mounting model BA368E C1 C2 C3 C4 + Terminals for optional 4/20mA output A1 A2 + Alarm 1 A3 A4 Terminals for + optional dual alarms Alarm 2 12 + Power supply RS1 RS2 3 4 5 6 7 8 9 10 + + Reset Add link Pulse Add link Pulse to energise input to energise input b pulse input A A pulse input b P1 P2 + Pulse output Combined EU Declaration of Conformity This declaration of conformity for electrical apparatus is issued under the sole responsibility of the manufacturer. Description BA364G is field mounting and the BA367E, BA367E-SS and BA368E are panel mounting externally powered counters. The BA367E-SS has a stainless steel enclosure with an impact resistant IP66 front. Manufactured by BEKA associates Ltd, Old Charlton Road, Hitchin, Herts. UK. SG5 2DA Council Directives this equipment complies with: 2014/34/EU (ATEX Directive) Relating to equipment and protective systems intended for use in potentially explosive atmospheres. Provisions of the Directive fulfilled by the equipment: ITS16ATEX28408X issue 3 dated 25/11/2016 Group II Category 1 G Ex ia IIC T5 Ga -40°C Ta +70°C (1) Group II Category 2 D Ex ia IIIC T80°C Db -40°C Ta +60°C (2) (1) When a BA367E-SS installation relies on the certified impact and ingress protection provided by the front of the instrument to maintain certification of the panel enclosure in which the instrument is mounted -40°C Ta +60°C (2) Not BA367E & BA368E Notified Body for EU-Type Examination and production INTERTEK ITALIA SPA 2575 Via Guido Miglioli, 2/A 20063 Cernusco sul Naviglio (MI) Italy. Compliant with standards: EN 60079-0:2012 + A11:2013; EN 60079-11:2012 Compliant with EN IEC 60079-0:2018 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) relating to hazardous substances in electronic and electrical equipment. 2015/863/EU additional substances added by amending Annex II to Directive 2011/65/EU as regards the list of restricted substances. mark first affixed in 2016 Authorised Signatory: Issue 1 21st Feb 2024 Olivier Lebreton CEng MIET Managing Director