THINK RIDER POWER TRAINER A1

Introduction

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

[email] www.alza.co.uk/kontakt

[phone] +44 (0)203 514 4411

Importer: Alza.cz a.s., Jankovcova 1522/53, Holesovice, 170 00 Praha 7, www.alza.cz

Product Introduction

Please add the personnel of customer service on WeChat for more technical support. The company reserves the right to interpret the above content. (Please refer to the relevant content of WeChat official account of ThinkRider)

Bicycle Adaptation

Product Composition

The product includes the following components:

• 1. A1 smart trainer *1
• 2. Quick release level *1
• 3. Quick release converter *1 (Compatible with 130/135mm Q.R)

Notes:

• Products and accessories may be changed due to different batches. Please refer to the actual products.
• Please keep the box and foam for future transportation and storage.

Trainer Installation

1. Place the trainer on a level surface, install two horizontal feet.
2. Note that the length of the two feet is not the same; left and right direction cannot be installed in the opposite direction. Refer to the top view below.
3. The cycling trainer has a freehub that supports standard Shimano and SRAM 8-11 speed cassettes.
4. Install your bike on the trainer, just like installing the rear wheel on the bike.
5. The installation method of Q.R. /Thru Axle converters is shown below.
6. Make sure your bike is LOCKED to the trainer, in case it comes loose and causes harm.

Diagrams:

Top View: Illustrates the trainer's frame structure for bike attachment.

Quick release: Shows compatibility for 130mm and 135mm spacing.

Thru axle (Optional): Shows compatibility for 142mm and 148mm spacing.

Ensure your bike is LOCKED.

Caveat

• Do not let children and pets get close to the bike trainer.
• Please use the trainer on a stable ground.
• Please consult your doctor before starting or modifying any exercise program.
• Do not touch the moving parts of the trainer with your hands or objects.
• The flywheel will generate high temperatures after using for a long time. Do not touch it.
• Do not touch the flywheel or disassemble the bicycle while the flywheel is still rotating.
• Be careful when standing on the trainer.
• Keep the trainer away from fire, water and other obstacles.
• It is strictly forbidden for people with heart or brain diseases and other users who are not suitable for high-intensity exercise to use the trainer.
• Users who are not responsible for their own behaviour should not use the trainer.

Special Reminders

1. ThinkRider A1 is a direct-drive trainer with a pure power meter. When using cycling software (e.g., Zwift, Powerfun App), on the device connection page, select "power meter" or "power equipment". Do not choose Smart trainer options.
2. A1 trainer does not need calibration.
3. Trainer A1 firmware upgrade tool: For iPhone, download the app from the App Store: Thinkrider tools. For Androids, please download the app from Google Play: Thinkrider tools.
4. If the belt skids, it should be tightened according to the videos. (The belt is a consumable item; it is recommended to replace it once a year.)
5. Please pay attention when installing the horizontal bracket. There is a difference between front and back and left and right.