VEVOR Bunkie Board
Affordable. Reliable. Home Improvement.
Models: CB005, CB006
Safety Instructions
WARNING: Read this material before using this product. Failure to do so may result in serious injury.
Assembly Precautions
- Assemble only according to these instructions. Improper assembly may create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble if tired or when under the influence of alcohol, drugs, or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Bunkie Board.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use Precautions
- DO NOT SIT OR STAND ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed specified weight capacities.
- Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Bunkie Board.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
Parts List
The following parts are included:
- Bunkie Board (x2) - These are wooden boards with black straps for mattress support.
Visual Description: Two rectangular wooden boards are shown, each with several black straps running across the surface.
Assembly Step
Visual Description: A three-step diagram illustrates the assembly process. The first image shows a metal bed frame. The second image shows the two bunkie boards placed onto the metal frame. The third image shows the bunkie boards fully covering the metal frame, ready for a mattress. Blue arrows indicate the progression from one step to the next.
Product Parameter
| Model | CB005 | CB006 |
|---|---|---|
| Colour | Burlywood | |
| Product Size(mm) | 800*1300*10 | 1800*900*10 |
Manufacturer and Distributors
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
UK Representative: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
EU Representative: E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
