Quick Guide

1. Package Contents

• Indoor Pan & Tilt Camera ?
• Ethernet Cable ?
• Power Adapter ?
• Screw X 2 ??
• Mounting plate
• Pin Tool ?
• Drywall Anchor X 2 ⚓⚓

Illustrations of the camera, Ethernet cable, power adapter, screws, mounting plate, pin tool, and drywall anchors.

2. Mounting Plate

1. Drill small holes 3cm apart.

   Diagram showing a drill, a ruler indicating 3cm, and a wall with two small holes drilled.

2. Install anchors into drill holes.

   Diagram showing drywall anchors being inserted into the drilled holes in the wall.

3. Align mounting brackets as shown and install screws into anchors.

   Diagram showing the mounting plate with brackets being aligned and secured with screws into the anchors.

4. Place the bottom of the camera onto the mounting plate and twist rightwards to secure.

   Diagram illustrating the camera base being attached to the mounted plate, with a rotational arrow indicating the twisting motion.

3. Set-Up the Camera

Identify the camera ports:

• Antenna ?
• Ethernet ?
• Power Port ?
• Micro SD Card Slot ?
• Pin Hole ?

Note on Pin Hole: In the event that you forget your password, insert the pin tool into the pin hole and push the reset button.

Connections:

• Plug power supply into camera and into outlet.

  Diagram showing the power adapter connected to the camera's power port and plugged into a wall outlet.

• Plug network cable into camera and into your router.

  Diagram showing the Ethernet cable connected to the camera's Ethernet port and plugged into a router.

(You can unplug the network cable once Wi-Fi is set up.)

4. Connect with Apps

Learn how to set up with apps:

• SkylinkCam 1
• Orbit
• SkylinkNet