Grandstream GXP1610/1615 Small Business IP Phone

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215 USA

Tel: +1 (617) 566 – 9300

Fax: +1 (617) 249 – 1987

www.grandstream.com

For Warranty and RMA information, please visit www.grandstream.com

Product Overview

The GXP1610/1615 is a Small Business IP phone that features a single SIP account, up to 2 call appearances, 132x48 graphical LCD, 3 XML programmable context-sensitive soft keys, dual network ports with PoE (GXP1615 only) and 3-way conference. The GXP1610/1615 supports superb full-duplex hands-free speakerphone with HD audio, advanced security protection for privacy, and compatible with Grandstream UCM features.

Package Contents

• 1 x Phone Main Case
• 1 x Handset
• 1 x 5V Power Adapter
• 1 x Ethernet Cable
• 1 x Phone Cord
• 1 x Phone Stand
• 1 x Quick Installation Guide / 1 x GPL License

Phone Setup

Installing the Phone (Phone Stand):

1. Insert the hooks on top of the stand into a slots; you have options to use either upper OR lower slots.
2. Firmly slide the stand upward to lock it in place.

Installing the Phone (Wall Mount):

1. Insert all 4 hooks located in the front of wall mount into the slots.
2. Firmly slide the wall mount upward to lock it in place.
3. Pull out and rotate the tab from handset rest to hold the handset while the phone is mounted on the wall.

Connecting the Phone:

To setup the GXP1610/1615, follow the steps below:

1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/ switch or a router (LAN side of the router) using the Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet.
4. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up.
5. Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP.

Tips For Using the Keypad

Standard Keypad:

1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.
3. Press the round MENU button to confirm a menu selection.
4. The phone automatically exits MENU mode when there is an incoming call, the phone goes off-hook, or when the MENU mode is left idle for 60 seconds.

Phone Configuration

Configure the GXP1610/1615 Using a Web Browser:

1. Ensure your phone is powered up and connected to the Internet.
2. Press the MENU button to access the phone menu.
3. Press the “down” arrow button to “Status” and press MENU button to check the IP address.
4. Type the phone's IP address in your PC browser. (See figure below)
5. The default administrator username and password are “admin”; the default end-user username is "user" and the password is “123”.

Configure the GXP1610/1615 using the Keypad:

1. Make sure the phone is idle.
2. Press the MENU button to access the keypad MENU to configure the phone.
3. Select MENU->Config, to configure settings for SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password.
4. Follow MENU options to configure the basic features of the phone. For example: the IP address if using a static IP. For details, please check GXP1610/1615 User Manual.
5. Please contact your ITSP (Internet Telephony Service Provider) for additional settings that may be necessary to configure the phone.

Note: For the detailed user manual, please download from: http://www.grandstream.com/support

Emergency Service Disclaimer

The GXP1610/1615 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit ("Emergency Service(s)") or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GXP1610/1615 to use that service, and periodically test your configuration to confirm that it works as You expect. If You do not do so, it is Your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.

GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE GXP1610/1615. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE GXP1610/1615 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.

Precautions

WARNING: Please DO NOT power cycle the GXP1610/1615 when the LED lights are flashing during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.

WARNING: Use only the power adapter included in the GXP1610/1615 package. Using an alternative non-qualified power adapter may damage the unit.