10'x10' Canopy With Five Sidewalls

Care And Maintenance

• Wash frame and canopy with a mild solution of soap and water, rinse thoroughly.
• Dry completely. Do not use bleach or solvents.
• Inspect frame periodically to ensure all bolts and nuts are tight.
• Always return the canopy to the storage bag after use. Be sure the canopy is completely dry before storing it.
• Any personal accessories or modifications to the product should be removed before the onset of inclement weather such as heavy rain, wind, lightning, hail, snow, etc.
• Please contact us for product issues or installation issues, we will be happy to help you.

Set-up Instructions

Important: Do not use excessive force during any part of set-up.

1. Open the canopy frame

   [Diagram of two people opening a canopy frame]

2. Attach the canopy top, using the corner velcro to attach to the top of each corner

   [Diagram showing canopy top being attached to the frame]

3. Grab the middle section of cross beam to open the frame.

   [Diagram illustrating grabbing the middle section of the cross beam]

4. Engage the slider at each corner

   [Diagram showing sliders being engaged at canopy corners, with a sequence showing the canopy fully extended]

5. Adjust the canopy height

   [Diagram showing how to adjust canopy height, with a close-up of the adjustment mechanism]

6. Secure the canopy in place. Insert the stakes to the ground and tie the ropes with the plastic adjustment.

   [Diagrams showing stakes being inserted into the ground, ropes being tied with plastic adjusters, and the canopy secured from multiple angles. Includes an arrow indicating 'Roll up']

Disassembly Instructions

Important: Do not use excessive force during disassembly. Please remove stakes and ropes before taking down.

1. Release each push button for each leg

   [Diagram showing a push button on a canopy leg being released]

2. Release sliders for four corners

   [Diagram showing sliders at the four corners of the canopy being released]

3. Grap the middle section of the frame

   [Diagram illustrating grabbing the middle section of the frame for collapse]

4. Close the frame

   [Diagram showing two people collapsing the canopy frame]

5. Store the canopy

   [Diagrams showing the canopy being placed into the storage bag, with a final image of the rolled storage bag]