SteadyWin GIM4310-10 Planetary Reducer Servo Motor Installation Drawing
Product Overview
This document provides the installation drawing for the SteadyWin GIM4310-10 Planetary Reducer Servo Motor. It details the physical dimensions, mounting specifications, and general tolerances required for proper installation.
Technical Drawings and Dimensions
The following diagrams illustrate the key dimensions of the GIM4310-10 servo motor:
Front View (with mounting holes):
- Outer diameter: Ø38
- Mounting hole diameter: Ø7.6
- Inner diameter: Ø33.45 (2-M2 4 mounting holes)
- Inner diameter: Ø35 (2-M2 4 mounting holes)
- Bolt circle diameter: Ø47.5 (6-M2.5 3 mounting holes)
- Angular feature: 33°
Side View:
- Outer diameter: Ø53
- Inner diameter: Ø37
- Length: 32
- Wall thickness indicators: 1 unit on each side
Rear View (with mounting features):
- Diameter: Ø47.5 (3-M2.5 5 mounting holes)
- Inner diameter: Ø27 (3-M3 4 mounting holes)
Important Note: Screws must not be excessively long, as this may cause motor damage.
General Tolerances
The following table outlines the general tolerances per ISO 2768-m:
| Size (mm) | Tolerance (mm) |
|---|---|
| <=6 | ±0.1 |
| >6 <=30 | ±0.2 |
| >30 <=120 | ±0.3 |
| >120 <=400 | ±0.5 |
| >400 <=2000 | ±1.0 |
Specifications
- Scale: 1:1
- Drawing Title: 4310-10SHS INSTALLATION DRAWING
