Artika Edwin LED Ceiling Fan - Instruction Manual
IMPORTANT: READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Included Hardware
| Item | Description | Quantity |
|---|---|---|
| A | Wire connector | x 3 |
| B | Driver | x 1 |
| C | Mounting bracket | x 1 |
| D | Canopy | x 1 |
| E | Retaining screw | x 4 |
| F | Canopy screw | x 2 |
| G | Junction box screw | x 2 |
| H | Main rod | x 1 |
| I | Canopy cover | x 1 |
| J | Coupling cover | x 1 |
| K | Light fixture | x 1 |
What You Will Need
- Screwdriver
- Drill
- 6.5 mm / 1/4 in drill bit
- Pencil
Important Safety Warnings
WARNING: Risk of electrical shock. Turn off power at the breaker panel. Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance. Do not use outdoors.
CAUTION: Mount with the lowest parts at least 2.1 m / 82.6 in above the floor or grade level. The setting screws must be securely tightened before operating the fan.
To reduce the risk of fire, electric shock or personal injury, mount the fan only to an outlet box marked "acceptable for fan support" and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for hanging light fixtures are not rated for fan support and may need to be replaced. If in doubt, contact a qualified electrician.
DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
WARNING: The mounting bracket is not designed to exceed 15.9 kg / 35 lb of total weight.
All wiring in accordance with the national Electric Code ANSI/NFPA 70 and local codes.
To Reduce The Risk Of Personal Injury, Do Not Bend The Blade Brackets When Installing, The Brackets, Balancing The Blades, Or Cleaning The Fan. Do Not Insert Foreign Objects In Between Rotating Fan Blades.
FAN WEIGHT: 4.3 kg / 9.4 lb
REQUIRED MARKING: "Acceptable for Fan Support of 15.9 kg / 35 lb or less"
WARNING:
- To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Do Not Use Replacement Parts That Have Not Been Recommended By The Manufacturer.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- WARNING: If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.
- The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan;
- The mounting of the suspension system shall be performed by the manufacturer, its service agent or suitably qualified persons.
Installation Steps
Step 1: Mounting Bracket Installation
Attach the mounting bracket (C) to the ceiling electrical box using screws (E) and (G).
Step 3A: Main Rod Preparation
Insert the main rod (H) through the canopy cover (I) and coupling cover (J). Secure the rod with the provided screws.
Step 3B: Main Rod Preparation
Attach the main rod (H) to the light fixture (K) using the provided screws.
Step 3C: Main Rod Preparation
Feed the wires through the main rod (H) and secure the rod to the canopy (D).
Step 4: Fixture Assembly
Assemble the light fixture (K) to the main rod (H) using the canopy cover (I) and coupling cover (J).
Step 5: Fixture Installation
Attach the safety hook to the mounting bracket (C). Connect the wires from the main rod (H) to the ceiling wires. Attach the canopy (D) to the mounting bracket (C).
Step 6A: Wires Connection and Driver Installation
Connect the wires from the light fixture (K) to the driver (B) and then connect the driver to the mounting bracket (C).
Step 6B: Wires Connection and Driver Installation
Connect the black wire (L) to the black wire, the white wire (N) to the white wire, and the ground wire (GND) to the ground wire.
Step 7A: Final Installation
Secure the canopy (D) to the mounting bracket (C) and connect the wires.
Step 7B: Final Installation
Attach the light fixture (K) to the canopy (D) using screws (F).
Step 7C: Final Installation
Secure the canopy (D) and attach the light fixture (K) to the main rod (H).
Battery Warnings
BATTERY WARNING
INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. KEEP new and used batteries OUT OF REACH of CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN
- Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus.
- If you suspect your child has swallowed or inserted a button battery, immediately seek urgent medical assistance.
- Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
- Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
- Tell others about the risk associated with button batteries and how to keep their children safe.
WARNING: Always purchase the correct size and grade of battery most suitable for the intended use. Replace all batteries of a set at the same time. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries. Clean the battery contacts and the contacts on the device. Ensure the batteries are installed correctly with regard to polarity (+ and -). Remove batteries from any equipment that will not be used for an extended period of time. Remove used batteries promptly. Installation, removal and replacement of batteries must be done under adult supervision. Dispose of batteries in accordance with local regulations. Do not attempt to burn batteries or place them near a heat source.
Remote Control Functions
Pairing Instructions for Remote
- Turn the fixture power off for 15 sec at least.
- Turn the fixture power on. Press FAN ON/OFF button (no.4) and LIGHT ON/OFF button (no.7) simultaneously within the first 10 seconds that power was turned ON and until you hear 2 "beep" sounds. Pairing is successful.
- If pairing is not successful, repeat the steps above.
Remote Control Buttons:
- 1. Light indicator: Indicates the status of the light.
- 2. Switch all ON/OFF: Turns all lights and fan on or off.
- 3. Fan speed: Controls the fan speed (Low, Medium, High).
- 4. Fan ON/OFF: Turns the fan on or off.
- 5. Forward/Reverse: Changes the fan's direction.
- 6. PROGRAMMABLE Timer: Sets the timer for the fan.
- 7. Light ON/OFF: Turns the light on or off.
- 8. Brightness: Adjusts the light brightness.
Mute/Unmute beeper: Press and hold both buttons (4 and 7) until you hear the beeping sound. 1 beep: The beeper muted. 2 beeps: The beeper activated.
Supplier's Declaration of Conformity
USA (FCC)
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Unique Identifier: Edwin Fan, 23FAN-SRU-C2SL
Responsible Party – U.S. Contact Information
Costco Wholesale Corporation
P.O. Box 34535
Seattle, WA 98124-1535
USA
1-800-774-2678
www.costco.com
Costco Wholesale Canada Ltd.*
415 W. Hunt Club Road
Ottawa, Ontario,
K2E 1C5, Canada
1-800-463-3783
www.costco.ca
* operates in Québec under the name Les Entrepôts Costco
Made in China
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warranty
Artika For Living Inc. offers a three-year (3) limited warranty on manufacturing defects from the date of purchase for residential use only. The warranty is non-transferable and requires the original sales receipt. The remedy is product or part replacement at Artika's discretion and cannot exceed the original purchase price. The warranty is valid only for products installed in accordance with the building code and laws effective in the region where the unit is being used, as well as in accordance with the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Normal wear and tear, misuse, negligence, vandalism, improper maintenance, accident, abuse, fire, flood, theft, acts of God, neglect, or alteration of the product are not covered. Accessories like bulbs or batteries are excluded. The warranty does not cover handling, labor, transportation, or any other cost associated with installation or replacement. Artika For Living Inc. will not be held responsible for any direct or consequential damages or injuries related to the use of this product arising from improper use or installation.
Please visit www.artika.com to discover more about Artika for Living Inc.
