Laserliner SensoLite 110 / SensoLite 110 G Laser Receiver

Introduction

Please read the operating instructions, the enclosed "Warranty and Additional Information" booklet, and the latest information via the internet link at the end of this manual completely. Follow the instructions contained therein. This document must be kept in a safe place and passed on with the device.

This document provides information on the Laserliner SensoLite 110 / SensoLite 110 G laser receiver for red and green rotary lasers.

Product Overview and Components

Components:

• 1. All-round marking groove: A groove around the receiver for marking.
• 2. Receiver field for laser beam: The area that detects the laser beam.
• 3. Magnet: Magnets for attaching the receiver to surfaces.
• 4. Universal mount: A bracket for attaching the receiver to levelling staffs or other supports.
• 5. Fastening screw for levelling staffs: Secures the receiver to a levelling staff.
• 6. Battery compartment (rear side): Location for battery insertion.
• 7. Switch: Precision range / Free-hand range: Selects the operating mode for different accuracy requirements.
• 8. Sound ON / OFF: Toggles the audible signal.
• 9. ON / OFF switch: Powers the device on or off.

Receiver Settings and Indicators:

• 10. Free-hand range: Mode with larger tolerance for rough alignment by hand.
• 11. Fine range: Mode with smaller tolerance for precision alignment (e.g., with levelling staffs).
• 12. Hand receiver above laser level: Indicates the laser beam is detected above the desired level.
• 13. Precisely on laser level: Indicates the laser beam is detected at the desired level (continuous tone).
• 14. Hand receiver below laser level: Indicates the laser beam is detected below the desired level.
• 15. Sound ON / OFF: Controls the audible feedback.
• 16. Low battery indicator: Shows when the battery needs replacement.

Signal Indicators:

Safety Instructions

General Safety Instructions:

• Use the device only according to its intended purpose and within specifications.
• Measuring tools and accessories are not toys. Keep out of reach of children.
• Do not modify the device's structure.
• Do not expose the device to mechanical stress, extreme temperatures, moisture, or significant vibration.

Safety Instructions - Electromagnetic Radiation:

• The measuring device complies with electromagnetic compatibility regulations and limit values according to EMC-Directive 2014/30/EU.
• Local operating restrictions may apply (e.g., in hospitals, aircraft, petrol stations, or near people with pacemakers). Electronic devices can cause hazards or interference.

Danger - Powerful Magnetic Fields:

Powerful magnetic fields can adversely affect persons with active medical implants (e.g., pacemakers) and electromechanical devices (e.g., magnetic cards, mechanical clocks, precision mechanics, hard disks).

Comply with national stipulations and regulations regarding the effect of magnetic fields on persons, such as BGV B11 §14 "electromagnetic fields" in the Federal Republic of Germany.

To avoid interference/disruption, always keep implants or devices at a safe distance of at least 30 cm away from the magnet.

Operation

Inserting the Battery:

Open the battery compartment and insert batteries according to the symbols. Ensure correct polarity.

Working with the Laser Receiver:

Set the rotary laser to maximum speed and switch the laser receiver on. The receiver can detect the laser beam at a great distance. Move the SensoLite up and down through the laser beam until the middle indicator (13) appears. Mark the measured height at the all-round marking groove.

Tolerance Settings:

• Free-hand range (10): Display with larger tolerance for rough alignment by hand.
• Precision range (11): Display with smaller tolerance for precision alignment (e.g., with levelling staffs).

Universal Mount

The laser receiver can be attached to levelling staffs using the universal mount. The Flexi measuring staff (Art. No. 080.50 – red / 080.51 – green) is recommended for all measurements from floor heights, allowing direct calculation of height differences.

Maintenance and Care

Clean all components with a slightly damp cloth. Avoid using cleaning agents, scouring agents, or solvents. Remove batteries before storing for longer periods. Store the device in a clean, dry place.

Technical Data

EU Directives and Disposal

This device complies with all necessary standards for the free movement of goods within the EU.

This product is an electrical device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.

Further safety and supplementary notices are available at: http://laserliner.com/info?an=sesoli110

The device carries the CE mark and the WEEE disposal symbol [recycle symbol with crossed-out bin].

Service and Contact

Umarex GmbH & Co. KG
Laserliner
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
Email: info@laserliner.com
Website: www.laserliner.com

Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333