eero Pro Mounting Kit Surface mount with PoE connection for eero Pro router at Crutchfield
eero PoE+ Adapter What's included 6QJ PoE+ Adapter, mounting plate Custom cover ~ ~ Four screws Only works with PoE+ and eero (2nd generation) Custom Installer only Compatible with gigabit Ethernet d Advanced security with eero Plus - o - - 0 - Remote network -0- management In-opp Network Transfer To sign up as an eero Cust~m Installer, visit pro.aero.com or call VIP support at (866) 754-n86. eero Technical specifications Required for setup eero Custom Installer account, eero (2nd generation), PoE+ injector or PoE+ switch, Ethernet cable (max 100m/328ft, category Se or higher, 6A recommended), Phillips head screwdriver Dimensions 5.04in (128mm) x 5.87in (149mm) x 2.80in (71mm) Junction box requirements Single, double, round, or octagonal junction box © 2017 eero inc. All rights reserved . The eero word mark and logo are trademarks of eero inc. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android is a trademark of Google Inc. eero inc. San Francisco, CA Assembled in China NrO.com Let's get started 1. Disassemble the cover and PoE+ mounting plate. 2. Install a junction box (single/ double/round/octagonal). 3. Set up a PoE+ injector/ switch and route an Ethernet coble (Se or higher, 6A recommended) to the junction box. 4. Plug in the Ethernet cable to the PoE+ Adapter and place the adapter in the junction box. 5. Rotate the PoE+ mounting plate until the holes align with the junction box screw holes. One set of cable retention clips should align with the Ethernet and USB-C ports on the eero. 6. Select the two screws that fit the junction box screw holes to attach the PoE+ mounting plate. 7. Route the USB-C and Ethernet cables through the retention clips and plug into the eero. 8. Snap the cover over the eero and PoE+ mounting plate, ensuring that the cables ore fully covered. 9. Back out the visible screw until it is flush with the cover to keep it secure. 10. Power on the PoE + injector/ switch. You should see the LED light turn white. To complete setup, download the app. We're here to help: (866) 754-7286 For our return policy, warronty, privacy policy, terrRS of service, and more, visit eero.com/legol Because our klwyers made us: These devices comply with Port 15 of the FCC Rukts. Operation is subject to the following two conditiMs: (1) these devices may not cause ham,ful interference. and (2) these devices must accept any interference rtice,ved. including interferpnce tnot moy cause undesired operation.Adobe Acrobat Pro DC 19 Paper Capture Plug-in