Sekonda Smartwatch 1909/1910/1911/1912

Charge Your Smartwatch

Charge your smartwatch by connecting the magnetic USB charging cable provided. Charge the watch for at least two hours before first use.

Turn On Your Smartwatch

Remove the printed screen protector. Beneath this is another clear screen protector, which is advised to be kept on the watch to protect it from wear and tear.

Press and hold the power button for 5 seconds to turn your watch on. The home screen will appear when the watch is switched on.

To access the menu from the home screen, swipe right. From here, you can access function icons to enter their respective menus.

When not in use, the screen will enter sleep mode. To wake up the screen, press the power button. Alternatively, enable gesture control to wake up the screen by turning your wrist.

Notifications

Open the HitFit Pro app and navigate to the menu. Set which notifications you would like to receive on your watch.

Under "Device", select "Message push" to configure which notifications are displayed on your smartwatch.

Other Settings

Expand the menu below "Device" to view more settings:

• Watch alarm: Set up to five alarms.
• Find watch: Tap this, and your watch will vibrate to help you locate it.
• Drink water reminder: Set up your watch to provide reminders at set intervals.
• Sedentary reminder: Set up your watch to provide reminders at set intervals.
• Camera: Use your watch as a remote shutter for taking photographs.
• Heart rate monitoring: Turn on to allow your watch to monitor your heart rate at all times.
• Gesture control: With this enabled, the watch screen will wake up when you turn your wrist.
• Left hand or right hand: Select which wrist you wear your watch on.

For the App to Function Correctly, Please Take Notice of the Following:

• Do not pair the watch directly through your phone's Bluetooth settings. Always pair the watch through the app.
• Do not turn off Bluetooth in your phone's settings.
• To receive notifications from the app, you must accept the app's permissions.

The Smartwatch Interface

• Swipe right to display the function list: daily activity, temperature, sports, heart rate, sleep, countdown, timer, music, weather, message, find phone, relax, settings. Swipe up and down to scroll through the list and tap a function to select it.
• Swipe left to display daily activity: steps, distance, and active calories burned. Continue swiping left to view heart rate, sleep data, and weather.
• Swipe down to display symbols showing Bluetooth connectivity ? and battery level ?. You can also access do not disturb mode, settings, find phone, system info, and brightness settings.
• Swipe up to view new messages/notifications.

Buttons

• Press the top button to wake up the screen.
• Within any menu, press the top button to return to the home screen.
• Press the lower button to enter the sports menu.

To turn your smartwatch off, swipe up from the home screen, tap the settings option, and select "System", then "Shut down".

Changing Your Watch Dial Style

On the home screen (the screen displaying the clock), press and hold the middle of the screen. Swipe left or right to choose a dial style and tap to select it.

Downloading More Dial Styles

Open the app and tap the watch face icon in the bottom right of the screen. Browse different dial designs.

To select a dial and add it to your watch, tap it, then tap "Push". Ensure your watch is close to your phone. The app will display "Syncing..." for a few seconds while data is transferred. The new dial will then appear on your watch.

Adding a Photo to Your Watch Dial

Open the app and tap the watch face icon in the bottom right of the screen, then tap the "DIY" option.

Tap on the watch face at the top of the page. You can choose to take a photo or access your phone's album to select an existing photo.

Under "Colour", you can select white or black to change the time/date colour.

Select whether you want the time/date positioned at the top, bottom, or center of the dial.

Tap "Push" to add the dial to your watch.

Daily Activity

The watch displays your total steps, distance walked, and active calories burned for the current day. This data is cleared at midnight daily.

You can also access the daily activity screen by swiping left from the home screen.

Temperature

When enabled, the watch measures your temperature. The top measurement shows surface skin temperature, and the bottom shows body temperature. Measurement takes 60 seconds.

Note: For accurate body temperature measurement, the room temperature must be between 18-30°C.

Sports

In this mode, select from walking, running, climbing, riding, or basketball to record data during the activity.

Recorded data may include time, heart rate, steps, and active calories burned, depending on the selected activity.

Press the bottom button to end data recording.

Heart Rate

When selected, the watch measures your heart rate. The watch vibrates when the measurement is finished.

Sleep Monitor

The watch displays your total sleep time from the previous night, including total deep sleep and light sleep time.

Sleep times are measured between 21:30 and 12:00 the next day.

Countdown

Choose 1 minute, 5 minutes, 10 minutes, or set your own custom countdown duration.

Timer

Tap to start the timer. Tap again to pause the timer.

Music

With your phone connected via Bluetooth, music can be selected through the watch interface. Skip, pause, play, and adjust volume via the watch.

Weather

After connecting your watch to the HitFit Pro app, local weather information will be displayed.

Scroll down to see the weather forecast for the upcoming week.

To update weather information, synchronise the watch with the app. Ensure location permissions are enabled in your phone's settings.

Message

When connected to your phone via Bluetooth, notifications from your phone will be sent to your watch. You can view new messages/notifications on your watch.

Ensure you accept the permissions for push notifications on your phone for this to function correctly.

Find Phone

After connecting your watch to your phone via Bluetooth, selecting this option will cause the phone to vibrate and beep, making it easier to locate.

This option can also be accessed by swiping down from the home screen.

Relax

Select one or two minutes. Tap to start.

The watch will guide your breathing for the duration selected.

Screen Display

• Change dial: Access different watch faces.
• Brightness: Set the brightness of the watch screen.
• Screen time: Set how long the screen stays awake.
• Turn wrist wake: Set how long the screen stays awake when you turn your wrist. This setting must be enabled in the app (gesture control).

Vibrate

Set the vibration level.

Language

Set your language preference.

System

• System version: View Bluetooth name, software, and UI version.
• Shut down: Power off the watch.
• Reset: Clear all data from the watch and restore to factory settings.

International Protection Rating (Water Resistance)

Your smartwatch is IP68 rated, meaning it has complete protection from dust ingress and is protected from continuous immersion in water up to a depth of 1.5 metres for a maximum of 30 minutes.

Please note that salt water or certain chemicals in water may damage or weaken the watch seals, especially with repeated exposure.

To ensure your watch stays in good functioning condition, it is recommended that you:

• Do not press the buttons while your watch is submerged.
• Do not use the watch when diving or snorkelling.
• Do not attempt to charge the watch while it is wet.

Please note that the watch's touch screen will not function while submerged in water.

If your watch is exposed to water, always dry it fully with a soft cloth.

If your watch is exposed to any other liquids such as salt water, swimming pool water, soapy water, perfume, sunscreen, hand sanitiser, cosmetics, or other chemical products, wash it with clean water and dry it fully with a soft cloth.

General Care Warnings

The watch's functionality may be affected if these instructions are not followed.

• Do not attempt to disassemble your smartwatch. This may cause a safety hazard, could damage your watch, and/or affect its water resistance.
• Do not use hair dryers, blowers, or any other heated equipment to dry your watch. Do not operate your watch near radiators or heat sources, as this could cause damage.
• Do not place heavy objects or exert strong pressure on your smartwatch.
• Avoid using the watch in extremely high or low temperature environments.
• Avoid using the watch in high humidity environments, as this could affect its water resistance.
• Protect your smartwatch from prolonged exposure to direct sunlight.

Please note that the measurement results of this device are for reference only and are not intended for medical use. Users should always follow the advice of their doctor or other trusted medical professional.

When using your smartwatch on aeroplanes, in hospitals, or near medical electronic systems, please follow the relevant authority standards and be aware that wireless signals transmitted could impact the functionality of sensitive electronics.