Secop Single Pack HTK55AA 220-240V 50Hz RSIR
Single Pack Code Number: 195B4529
| Position | Title | Code | Amount |
|---|---|---|---|
| 1 | Compressor HTK55AA | 16122700 | 1 |
| 2 | Clip | 10633900 | 4 |
| 3 | Steel pin | 10634100 | 4 |
| 4 | Washer | 10634300 | 4 |
| 5 | Screw for cable clamp | 10636000 | 1 |
| 6 | Screw for cable clamp | 10636200 | 1 |
| 7 | Cover | 10636401 | 1 |
| 8 | Earth screw | 10641201 | 1 |
| 9 | Rubber grommet 16mm | 11322600 | 4 |
| 10 | Cable clamp | 11341000 | 1 |
| 11 | Terminal board 4.8mm | 15165700 | 1 |
Technical Data
Compressor Design
| Oil type | Mineral |
| Oil viscosity | 5cST |
| Oil quantity | 162cm³ / 5.5fl.oz |
| Refr. charge - tech. limit | 150g / 5.3oz |
| Free gas volume comp. | 1500cm³ / 50.7fl.oz |
| Weight | 7.8kg / 17.2lbs |
| Motor protection | external |
| Winding resistance main | 32.7Ω (at 25°C) |
| Winding resistance aux | 29.2Ω (at 25°C) |
| Max. winding temp. | 130°C / 266°F |
| Max. discharge temp. | 130°C / 266°F |
| Refrigerant(s) | R600a |
| Displacement | 5.6cm³ / 0.34cu.in |
| Compressors on pallet | 100 |
Illustration of the Secop K-Series compressor, showing its main body, electrical connections, and a label indicating 'K-Series'.
General Configurations with HTK55AA
| Conf. 1 | Conf. 2 | |
|---|---|---|
| Motorconfiguration | RSIR | RSCR |
| Power supply (nominal) | 220-240V/50Hz | 220-240V/50Hz |
| Number of phases | 1 | 1 |
| Voltage range | 187-264V | 187-264V |
| Approvals | VDE | VDE |
| Starting torque | LST | LST |
Note: Various options of connectors are possible - please contact SECOP-Sales.
Applications with HTK55AA
| Conf. 1 | Conf. 2 | |
|---|---|---|
| Refrigerant | R600a | R600a |
| Application | LBP | LBP |
| System cooling | static | static |
| Hot gas defrost | -/- | -/- |
| Long interval pull down | -/- | -/- |
Electrical Data - Configurations with HTK55AA
| Conf. 1 | Conf. 2 | |
|---|---|---|
| Starting device type | PTC | PTC |
| Run capacitor | -/- | 2.5μF |
| Start capacitor | -/- | -/- |
| LRA (locked rotor amps / 4s/ U(N)) | -/-A | -/-A |
| RLA (rated load amps / 1s/ U(N)) | -/-A | -/-A |
| Cut in current (U(N)) |
Compressor Dimensions and Fixation
Compressor Dimensions
Housing
| A Height | 166mm / 6.54in |
| B Height | 159mm / 6.26in |
| C Length shell | 194mm / 7.64in |
| D Length w. cover | 238mm / 9.37in |
| E Width | 151mm / 5.94in |
Connectors
| Suction (X) | Discharge (Y) | Process (Z) | ||
|---|---|---|---|---|
| Diameter [mm] | øi 6.1-6.2 | øi 5.1-5.2 | øi 5.92-6.08 | |
| (i:inside, o:outside) [in] | øi 0.24-0.24 | øi 0.2-0.2 | øi 0.23-0.24 | |
| Material | copper | copper | copper | |
| Horizontal angle | ±2° | 45° | 13° | 0° |
| Vertical angle | ±2° | 30° | 40° | 145° |
| Position l/h/w [mm] | 120/72/62 | 112/106/62 | -140/136/70 | |
| [in] | 4.7/2.8/2.4 | 4.4/4.2/2.4 | -5.5/5.4/2.8 | |
| Straight tube l. [mm] | 14 | 14 | 75 | |
| [in] | 0.5 | 0.5 | 3 |
Diagram illustrating compressor dimensions labeled A (Height), B (Height), C (Length shell), D (Length w. cover), E (Width), Z, and other reference points. Another diagram shows connector ports X (Suction), Y (Discharge), Z (Process) with their dimensions and angles. A third diagram depicts compressor fixation points (Baseplate, Small holes) with dimensions. Finally, diagrams show the 'Bolt joint' and 'Snap-on' mounting methods.
Compressor Fixation
| [mm] | [inch] | |
|---|---|---|
| Baseplate BI | 204 | 8.03 |
| Bw | 100 | 3.94 |
| Small holes SI | 170 | 6.7 |
| Sw | 70 | 2.76 |
| S2 | 178 | 7 |
| ØS | Ø 16 | Ø 0.63 |
| S2l | 7.8 |
Mounting Accessories
| Description | Order Code |
|---|---|
| '4ZN' with rubber grommet | 772N |
| '4ZN' with rubber grommet and sleeve for M6 | 768N |
| Bolt joint kit | 4ZN + 118-1917 (18) |
| '4ZN' with Snap on kit | 776N |
Application Notes
Provision for PE Grounding is located at the PE Stamp on the compressor.
Housing with dip-tray fixture (omega bracket).
Note: Various options of connectors are possible - please contact SECOP-Sales.
Configuration Details
Conf. 1 (RSIR)
| Motorconfiguration | RSIR |
| Power supply (nominal) | 220-240V/50Hz 1~ |
| Refrigerant | R600a |
| Application | LBP |
| Voltage range | 187-264V |
| Starting torque | LST |
| Approvals | VDE |
Ambient/Machine Room Temperatures Minimum/Maximum:
- Ambient temperature range: 10 - 43°C / 50 - 110°F
- Machine room temperature range: 10 - 48°C / 50 - 119°F
- Compressor cooling: static
Electrical accessories / wiring diagram for RSIR configuration, showing connections for Thermostat, Terminal board (incl. PTC, external protector), Cable clamp, Cover, and a 5th contact (optional).
Operation Pressure Range
Graph showing Condensing Pressure (saturation temperature) vs. Evaporation Pressure (saturation temperature) for continuous and transitory operation.
Components
| Item | Code |
|---|---|
| Terminal board (PTC, 4.8mm) | 15165700 |
| Cover terminal board | 10636401 |
| Cable clamp | 11341000 |
| Screw - uni6954 | 10636000 |
| Screw - uni6954 | 10636200 |
| Screw uni en iso 4757 | 10641201 |
Conf. 2 (RSCR)
| Motorconfiguration | RSCR |
| Power supply (nominal) | 220-240V/50Hz 1~ |
| Refrigerant | R600a |
| Application | LBP |
| Voltage range | 187-264V |
| Starting torque | LST |
| Approvals | VDE |
Ambient/Machine Room Temperatures Minimum/Maximum:
- Ambient temperature range: 10 - 43°C / 50 - 110°F
- Machine room temperature range: 10 - 48°C / 50 - 119°F
- Compressor cooling: static
Electrical accessories / wiring diagram for RSCR configuration, showing connections for Run capacitor, Thermostat, Terminal board (incl. PTC, external protector), Cable clamp, Cover, and a 5th contact (optional).
Operation Pressure Range
Graph showing Condensing Pressure (saturation temperature) vs. Evaporation Pressure (saturation temperature) for continuous and transitory operation.
Components
| Item | Code |
|---|---|
| Terminal board (PTC, 4.8mm) | 15165700 |
| Run capacitor (2.5μF, 4.8mm) | 10692802 |
| Cover terminal board | 10636401 |
| Cable clamp | 11341000 |
| Screw - uni6954 | 10636000 |
| Screw - uni6954 | 10636200 |
Performance Data
Optimization + Standard Conditions
Conditions: R600a, 220V/50Hz, RSIR, static, VDE
| pe [°C] | [°F] | Cooling capacity | COP | EER | P1 [W] | Current consumption | Application | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [W] | [Btu/h] | [kcal/h] | [W/W] | [Btu/Wh] | [kcal/Wh] | [A] | [kg/h] | |||||
| -23 | -10 | 93.0 | 318 | 80.0 | 1.55 | 5.29 | 1.33 | 60.0 | 0.40 | 1.00 | ASHRAE LBP | |
| -25 | -13 | 68.7 | 235 | 59.1 | 1.20 | 4.09 | 1.03 | 57.3 | 0.39 | 0.90 | cecomaf LBP | |
| -35 | -31 | 41.0 | 140 | 35.3 | 1.02 | 3.50 | 0.88 | 40.0 | 0.33 | 0.50 | EN12900 LBP | |
| -23 | -10 | 76.7 | 262 | 66.0 | 1.31 | 4.48 | 1.13 | 58.5 | 0.39 | 1.12 | ARI540 LBP | |
| -23 | -10 | 103.0 | 352 | 88.7 | 1.82 | 6.23 | 1.57 | 56.5 | 0.38 | 1.11 | AHAM LBP | |
| -35 | -31 | 38.8 | 133 | 33.4 | 0.97 | 3.30 | 0.83 | 40.2 | 0.32 | 0.46 | opt | |
Performance Tables
Conditions: R600a, 220V/50Hz, RSIR, static, VDE
| pe | Cooling capacity | COP | EER | P1 [W] | Current consumption | Ref. mass flow [kg/h] | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| [W] | [Btu/h] | [kcal/h] | [W/W] | [Btu/Wh] | [kcal/Wh] | [A] | |||||
| [°C / °F] | |||||||||||
| -35 / -31 | 38.8 | 133 | 33.4 | 0.97 | 3.30 | 0.83 | 40.2 | 0.32 | 0.46 | ||
| -30 / -22 | 58.9 | 201 | 50.7 | 1.23 | 4.19 | 1.06 | 48.0 | 0.35 | 0.70 | ||
| -25 / -13 | 81.9 | 280 | 70.5 | 1.48 | 5.06 | 1.27 | 55.3 | 0.38 | 0.97 | ||
| -23 / -10 | 90.4 | 309 | 77.8 | 1.57 | 5.35 | 1.35 | 57.7 | 0.39 | 1.08 | ||
| -20 / -4 | 107.9 | 369 | 92.9 | 1.73 | 5.92 | 1.49 | 62.3 | 0.41 | 1.29 | ||
| -15 / 5 | 137.2 | 468 | 118.1 | 1.99 | 6.78 | 1.71 | 69.1 | 0.44 | 1.64 | ||
| -5 / 23 | 205.9 | 703 | 177.2 | 2.50 | 8.53 | 2.15 | 82.4 | 0.50 | 2.47 | ||
| -35 / -31 | 31.7 | 108 | 27.2 | 0.80 | 2.73 | 0.69 | 39.7 | 0.31 | 0.41 | ||
| -30 / -22 | 48.5 | 166 | 41.8 | 1.00 | 3.42 | 0.86 | 48.5 | 0.35 | 0.63 | ||
| -25 / -13 | 68.7 | 235 | 59.1 | 1.20 | 4.09 | 1.03 | 57.3 | 0.39 | 0.90 | ||
| -23 / -10 | 76.3 | 261 | 65.7 | 1.27 | 4.32 | 1.09 | 60.3 | 0.40 | 1.00 | ||
| -20 / -4 | 92.3 | 315 | 79.4 | 1.40 | 4.77 | 1.20 | 66.1 | 0.42 | 1.21 | ||
| -15 / 5 | 119.5 | 408 | 102.8 | 1.59 | 5.44 | 1.37 | 75.0 | 0.46 | 1.56 | ||
| -5 / 23 | 185.1 | 632 | 159.3 | 1.98 | 6.76 | 1.70 | 93.5 | 0.54 | 2.44 | ||
Service and Repair Information
Service/Repair – R600a
Illustration of a Secop K-Series compressor with electrical connections. A separate diagram shows the wiring for the 5th contact, terminal N, and terminal S. The 'Service/Repair – R600a' section includes diagrams with icons indicating prohibited actions (e.g., connecting/disconnecting lines with refrigerant under pressure ⚠️ R600a), and a warning symbol ❗.
