Bigme Cloud Literacy Technology Co., Ltd. Quick Start Guide

Device Components:

• 1. Power key/fingerprint key: Used for powering on/off and fingerprint authentication.
• 2. Indicator: Shows charging status.
• 3. Type-C interface: For charging and data transfer.
• 4. Microphone: For audio input.
• 5. Handwritten ink screen: The primary display for reading and writing.
• 6. TF/SIM slot: For expandable storage or cellular connectivity.
• 7. Front camera: For video calls or photos.
• 8. Horn: For audio output.
• 9. Magnetic adsorption charging port of electromagnetic pen: For charging the stylus.
• 10. Rear camera: For taking photos or scanning.

Included Accessories:

• a. Equipment (The device itself)
• b. Product
• c. Warranty Card
• d. Type-C data cable
• e. Intelligent electromagnetic pen (Stylus)
• f. Cartridge
• g. Cartridge clip

Using Your Device:

1. How to turn on/off

• 1.1 Power On: From a shutdown state, press and hold the power key for 5 seconds to enter the opening interface.
• 1.2 Power Off/Restart: Long press the power button for 1 second to display the shutdown dialog box, then select 'shutdown' or 'restart'.
• 1.3 Force Restart: Long press the power button for 12 seconds to reset and restart the device.

2. How to recharge

• 2.1 Charging Requirements: Use a 5V-2A power adapter that meets safety specifications.
• 2.2 Charging Methods: Connect the device via a standard data cable to a computer's USB port or a compatible power adapter.
• 2.3 Indicator Status: During charging, the white indicator on the power key will be solid. It turns off when fully charged.
• 2.4 Charging Time: Full charge takes approximately 4-5 hours.

3. How to transmit data

• 3.1 USB Transfer: Connect the device to a computer using a USB cable for data transfer.
• 3.2 Cloud Literacy APP: Synchronize data through the Cloud Literacy APP.

4. How to perform WiFi transmission

• 4.1 Import Function: Navigate to the 'Offline books' application, tap 'Import' in the top right corner, and select 'WiFi import'.
• 4.2 WiFi Connection: Ensure the device and computer are connected to the same WiFi hotspot. Enter the URL provided in step 1 into your computer's web browser.
• 4.3 File Upload: Select local files to import. You can upload up to 10 files at once.

5. How to do the OTA upgrade

• Navigate to Settings > More Settings > System Update > OTA Online Update.
• Note: Ensure the device has more than 30% battery power before starting an upgrade.

Important Notes & Safety Information:

• Battery Replacement: Replacing batteries with the wrong model poses an explosion hazard. Dispose of used batteries according to instructions.
• Power Adapter: This product does not include a power adapter. If using one, ensure it is a 5V-2A adapter meeting safety requirements.

Handling Precautions:

• Do not crush the fragile screen. [no-crushing-symbol]

• Do not dismantle the machine without permission. [no-disassembly-symbol]

• Stay away from liquids, especially with batteries inside. [no-liquid-symbol]

• Service Environment: Operate within a temperature range of 0°C to 45°C.

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.