15 gen 2025 — CD ripping instructions: Apps > CD > Click “ ” to start CD ripping. Click to change the path for saving music files to local storage, internal SSD, removable.
DMP-A6 Gen 2 High Fidelity Music Streamer
Eversolo Audio Technology Co.,Ltd
Content/
01 Introduction
P1
02 Specification
P2
03 Hardware
P3
04 Basic Operation
P8
05 System Setting
P16
06 Connection and Setting
P23
07 Downloads
P28
01
P29
02
P30
03
P31
04
P36
05
P44
06
P51
07
P56
HIGH FIDELITY MUSIC STREAMER
Introduction
We appreciate your purchase of Eversolo DMP-A6 Gen 2 all-in-one streamer. As a hi-res DAC streamer with great performance and craftsmanship, DMP-A6 Gen 2 can not only play and manage various high-resolution local music well but also embeds various third-party high-resolution music streaming services, such as Tidal, Qobuz, Highresaudio, Amazon Music, WebDAV, and UPnP, etc. DMP-A6 Gen 2 can accommodate audiophiles needs by supporting rich output ways like digital, optical, coaxial, HDMI DSD multi-channel, and USB audio output. The DMP-A6 Gen 2 decoding portion uses a pair of ES9038 Q2M DAC chips in addition to an XMOS 316 audio processor. It decodes up to DSD512, PCM 768Khz@32Bit, and MQA. So that D/A conversion is completed with exceptionally low noise and distortion. Two-channel independent decoding design effectively avoids interference between channels, two ES9038 Q2M DAC chips correspond to left and right channels separately for independent D/A conversion output. High-precision resistance and and a fully balanced circuit guarantee the lossless XLR and RCA output signal amplification. Audio indicators like crosstalk, dynamic range, SNR are greatly improved. Versatile input ports are supported by the DMP-A6 Gen 2 for high specification digital audio decoding. USB-C audio input can be used to connect with PC, streamer, mobile phones and tablets ext. Optical and Coaxial inputs are to connect with streamer and CD player; DMP-A6 Gen 2 can be served as a high definition Bluetooth decoder when connecting with mobile devices via Bluetooth 5.0, with the support of APTXHD, LDAC protocols. The DMP-A6 Gen 2 will provide you with a fantastic and original hifi music experience by its excellent decoding performance and sound quality. It is advised to read this manual to make sure the products features are applied correctly.
Page 3
HIGH FIDELITY MUSIC STREAMER
Specifications
Body Material Display DAC
Audio Processor Storage
SSD Protocol USB Ports Ethernet WiFi
DAC Decoding
Music file formats
Music Services Music Streaming Bluetooth Input
USB-C Audio Input Optical/Coaxial Input HDMI ARC Input Optical/Coaxial Output
HDMI Audio Output
USB Audio Output Analogue Audio Output Control Methods
Analogue Audio Characteristics
Power Supply
Aluminium alloy 6.0 LCD touchscreen
ES9038Q2M*2 XMOS XU316 4G DDR4 +32G eMMC M.2 (NVME PCIe3.0)2280 protocol, up to 4TB
USB3.0*2 RJ-45(10/100/1000Mbps)
2.4G+5G Support DSD512 stereo, PCM 768KHz 32Bit, MQA DSD(DSF,DFF,SACD ISO Support DST up to DSD512),
MP3,APE,WAV,FLAC,AIF,AIFF,AAC,NRG,CUE Tidal, Qobuz, Highresaudio, Amazon Music etc
Roon Ready, Tidal Connect, WebDav, UPnP, DLNA etc
Bluetooth BT5.0, SBC/AAC/aptX/aptX LL/aptX HD/LDAC USB compatibility: Windows (7,10,11), Mac, Android, IOS Support up to stereo DSD512, PCM 768KHz 32Bit, MQA
Support up to stereo PCM 192KHz 24Bit, DSD64 Dop, MQA
Support up to stereo PCM 192KHz/24Bit
Support up to stereo PCM 192KHz 24Bit, DSD64 Dop, MQA
DSD64 Native multichannel/PCM 192KHz multichannel raw output, up to 5.1
Support up to stereo DSD512 Native, PCM 768KHz 32Bit, MQA (Support DAC audio devices with UAC standard only)
XLR (balanced) + RCA (pre-output)
On-screen touch control, Android/iPhone/iPad APP control/ Trigger out/WOL
Output level: XLR 5 V; RCA 2.5V Frequency response: 20Hz~20KHz XLR/RCA ( 0. 15dB)
Dynamic range:XLR > 128dB/RCA > 124dB SNR: XLR >128dB/RCA >124dB @A-Wt
THD+N: XLR<0.000092%(-120dB) /RCA :<0.00011%(-119dB) CrosstalkXLR>125dB/RCA>124dB
AC 110~240V 50/60Hz ,13W
Page 4
HIGH FIDELITY MUSIC STREAMER
Hardware
SSD Installation
SSD isnt included in the device, a SSD can be installed manually after you receive the parcel if required. M.2 (NVMe PCIe3.0) 2280 protocol SSDs up to 4TB is supported. How to install SSD: 1. Place the device upside down on a flat surface, unscrew the screws on the cover of the SSD slot, then remove the cover.
2. Pull open the fastening clip to install the SSD, secure the SSD by pressing the clip, then restore the screws and cover.
Notes: 1. The SSD must be installed and conform to the requested specification. 2. It is strictly forbidden to replace the SSD while powered on because doing so will harm the SSD. 3. SSD file systems NTFS, EXFAT, and FAT32 are supported. 4. If the recently purchased SSD is unable to be recognized, formatting the hard disk via "Home Screen > Files > Find the storage device > Tap the icon on left-top corner > Format".
Page 5
HIGH FIDELITY MUSIC STREAMER
5. To better support song transferring, it is advised to choose an external storage device as the music directory. Go to Settings >Transfer, and click to select the inserted external storage device. The system will automatically create the EversoloMusic folder, where the music files will be stored.
Page 6
Rear Panel
HIGH FIDELITY MUSIC STREAMER
Descriptions:
Power on/off
Gigabit Ethernet network socket
HDMI audio only output: support DSD output
USB 3.0 OTG: Connect external storage devices/ optical disc drives / PC
(Settings - General - USB OTG)
USB (Audio out): USB audio output for connecting audio devices (DAC)
Coaxial input: connect CD player, set-top box, or digital turntable
Optical input: connect CD player, set-top box, or digital turntable
USB-C input: USB Audio input,Connect mobile phone(should use OTG
cable),computer,DAP and other audio sources that support USB audio output
Optical output: connect decoder or preamp
Coaxial output: connect decoder or preamp
XLR/RCA analogue output: Connect pure preamp, active speaker or power amplifier
WiFi antenna: connect to the wireless network
Trigger output: Connects a power amplifier to enable power-on/off synchronization. The
output is 12V when powered on and 0V when powered off
ARC: Connects to TVs, projectors, or other display devices with HDMI eARC/ARC
functionality
Bluetooth antenna: receive Bluetooth signals
Antennas diagram
* USB maximum supply current: 1.2A. If connecting external optical disc drivers, please use an additional power adapter or USB splitter cable (USB OTG and USB AUDIO OUT).
* Please use the analog XLR/RCA outputs for Coaxial, Optical, Bluetooth, or USB input. * Pointing antennas upward before using.
Page 7
Front Panel
HIGH FIDELITY MUSIC STREAMER
LED
Indicator light Knob
Controls
Rotate : Adjust volume
Short press Power on/Power off/Reboot/ Timed shutdown / Screen off Long press: Power off
Volume Control: The knob can be turned clockwise to turn up the volume and counterclockwise to turn down the volume when the device is playing music. *The audio setting allow you to adjust the volume step (0.5db3db).
Page 8
Power on / off
HIGH FIDELITY MUSIC STREAMER
Power on: press the knob once to turn it on when the device is powered off. Power off/reboot: short press the knob to see a pop-up menu and select power off or reboot; long press for 3 seconds to power off. Timed shutdown: several timer are available for choosing, or you can customize one. Screen-off: the device continues to work after screen off, tap the screen again to light it up.
Page 9
HIGH FIDELITY MUSIC STREAMER
Home Screen
Basic Operation
Status bar
Music player entrance
Function entrance
Play/pause Previous track Next track Home Back
Status Bar: input/output connection, network status, storage device, volume, and currently playing song. Click input/output/network/storage device icons to access quick settings, click the song info bar to enter into Music Player.
Page 10
HIGH FIDELITY MUSIC STREAMER
Music Player
DMP-A6 Gen 2 Music Player allows to play lossless music from SSD, hard drive, NAS and streaming services app. Click Music player entrance to enter into Music Player interface and see currently playing tracks, progress and control icons.
Playback
Play queue
Switch play mode
Descriptions Favorites: add the currently playing track to my favorites. Playback: previous/next track, pause/playback control. Switch play mode: switch play modes between list loop, single loop, shuffle play and order play. Play queue: a list of all tracks currently selected to be played, such as all tracks by a certain artist or in a certain album.
Page 11
HIGH FIDELITY MUSIC STREAMER Network Connection
Make sure to connect the network for DMP-A6 Gen 2, both Ethernet and WiFi are supported. Access into "Settings > Network > WiFi".
Music Library
The music library allows you to manage and categorize local music. Click "Add Library" to add music from local SSD, external storage devices, SMB, and NFS.Or click on the hover window of hidden menu on the left and select Library.
Hidden menu
Page 12
HIGH FIDELITY MUSIC STREAMER
DMP-A6 Gen 2 will categorize the added music files by track, artist, album etc.
"My" will show recently playing records, playlists added according to personal preferences, and quick access to favorite tracks, artists, and albums.
Page 13
HIGH FIDELITY MUSIC STREAMER Music Service
It includes streaming services, music apps, music cloud drivers and music connect. Log in your account to play music from third-party apps.
Note: *More music apps will be available for download, please check the official website for firmware updates.
Page 14
HIGH FIDELITY MUSIC STREAMER
File Manager
File Manager is used to managing files in local storage, SSD, removable storage devices, NFS, and SMB in the same network. Click to copy, paste, and delete etc.
The device enables to copy files from external storage device to SSD conveniently. Go to Files
Manager and select the music file in the storage device and click
to copy the music
file to SSD.
Page 15
HIGH FIDELITY MUSIC STREAMER Inputs/Outputs
Choose inputs and outputs based on how the actual device is connected. Note: * all digital input connections only support output audio by analogue output, not digital output.
Apps
You can view, install and uninstall third-party apps. To install third-party apps, firstly download the APK file and copy it to a removable hard drive, insert the hard drive into this device and find APK file in File Manager, then install it by one click. Note: * It is recommended to install tablets apps.
Page 16
HIGH FIDELITY MUSIC STREAMER CD Playback and Ripping
By connecting with a USB CD-ROM, the device can both play music from CD and rip music files from CD. CD ripping instructions: Apps > CD > Click " " to start CD ripping.
Click to change the path for saving music files to local storage, internal SSD, removable storage or NFS, SMB devices in LAN.
Page 17
HIGH FIDELITY MUSIC STREAMER
System Settings
System settings include audio settings, display settings, network settings, general settings, song transfer and system upgrade. The settings allow you to change the filtering characteristics of the RCA/XLR outputs, the audio format output from the HDMI/Optical/ Coaxial/DAC, and the formats supported by MQA. * Set the volume to the maximum when outputting MQA via digital outputs (e.g.: USB or SPDIF outputs). But there is no need to set the volume to the maximum when MQA is output from internal DAC through analogue output.
DAC Filter Characteristics
Choose different filter characteristics according to personal preference by Settings > Audio > XLR/RC Output > DAC filter characteristics.
Page 18
HIGH FIDELITY MUSIC STREAMER
CHARACTERISTICS
FILTER
Fast Roll-Off, Linear Phase
Filter
IMPULSE RESPONSE
CHARACTERISTIC Distance Edge
Low order reverb, natural
Far Neutral
Slow Roll-Off, Linear Phase
Filter
Low order reverb, accurate
Mid far Sharp
Fast Roll-Off, Minimum
Phase Filter
High order reverb, mellow
Mid close Neutral
Slow RollOff, Minimum Phase Filte
Apodizing, Fast Roll-Off, Linear Phase
Filter
Hybrid, Fast Roll-Off, Minimum
Phase Filter
Intermediate reverb, warm
Middle
Neutral
Intermediate reverb, natural
Mid far
Sharp
High order reverb, mellow
Close
Sharp
Brickwall Filter
High order reverb, mellow
Middle
Sharp
Page 19
HIGH FIDELITY MUSIC STREAMER Display Settings
In Display menu, there are some sub-menus for screen brightness adjustment, screensaver setting and screensaver modes.
Screen brightness: adjust brightness level of the screen display. Knob brightness: adjust the brightness for the light surrounding the knob. Screensaver: screensaver will be displayed without operation for a certain time. After operation is detected again, the system will exit screensaver state. Press Power button can also exit screensaver. Screensaver mode: four screensaver modes are available for choosing. VU meter: select different VU meters according to personal preference.
Page 20
HIGH FIDELITY MUSIC STREAMER Network Settings
Access Settings > Network > Phone Control, and scan QR code to download Eversolo Control APP. Or download and install the APP on the official website and manual.
Mobile Phone Controlling APP
Please make sure the mobile phone is on the same network with the device, then open the APP, select DMP-A6 and go to the next step.You will see the home screen after connecting successfully.
Page 21
HIGH FIDELITY MUSIC STREAMER
Notes: *Android (for mobile phones only) and IOS(both iphones and iPad) apps both can be downloaded on Quick Start Guide. *IOS apps can be also downloaded by searching Eversolo Control in the App Store.
Language
Access into "Setting > General > language" to choose menu language.
USB-OTG Port
The USB-OTG port can be used to connect with computer by a USB data cable, so that it is convenient to copy and manage local files.
Page 22
HIGH FIDELITY MUSIC STREAMER Transfer
Access"Settings > Transfer" to transfer songs from computer to this device according to the description. Make sure computer and the device are on the same network, choose a path to save songs in Music Directory.
Page 23
HIGH FIDELITY MUSIC STREAMER
System Upgrade
Access Settings > About > Version, online update and USB update are supported.
Online Update After connecting with network, access Settings > About > Version, click Online Update to get the newest firmware, finishing firmware update by following popup tips and wait the device to reboot automatically. USB Update Download Eversolo DMP-A6 Gen 2 firmware to a USB stick, insert USB stick into the USB-A type port on the device, access Settings > About > Version, click USB Update to update firmware and wait for the device to reboot automatically. Notes: * Dont remove the USB stick or power off during the upgrade process. * It is recommended to use a FAT32 format USB stick. * There is no need to unzip the downloaded file package.
Page 24
HIGH FIDELITY MUSIC STREAMER
Connection and Setting
The DMP-A6 Gen 2 has USB audio, HDMI audio, Coaxial and Optical digital audio outputs, as well as RCA single-ended and XLR balanced analogue outputs.
USB Output
Use a USB audio cable to connect the device's USB audio output to the external DACs USB input. Then go to Home screen > Source > Internal Player > USB DAC.
USB audio cable
Audio DAC/Audio decoder
Note: * USB audio output supports up to stereo DSD512 Native, PCM 768KHz 32Bit and MQA.
HDMI Output
Use an HDMI cable to connect the device's HDMI DSD output to the AV receiver input, then go to Home screen > Source > Internal Player > HDMI.
HDMI cable AVR
Notes: *HDMI output supports audio output only, no video output. *HDMI audio output supports DSD64 Native multichannel/PCM 192KHz multichannel raw output.
Page 25
HIGH FIDELITY MUSIC STREAMER
SPDIF (Coaxial/Optical) Output
Use a Coaxial/Optical cable to connect the device's Coaxial/Optical output to the AV receiver input, then go to Home screen > Source > Internal Player > SPDIF.
Coaxial/Optical cable
DAC/AVR
Note: *Optical and coaxial outputs support up to stereo PCM 192KHz 24Bit, DSD64 Dop, MQA format.
XLR/RCA Output
Use a pair of RCA/XLR audio cables to connect the device's RCA/XLR output to the input of active speakers or HiFi power amps, then go to Home screen > Source > Internal Player >RCA or XLR.
RCA-type audio cable
XLR balanced audio cable Stereo HiFi audio system (HiFi headphone amplifier /Active monitor speaker)
Page 26
HIGH FIDELITY MUSIC STREAMER
Notes *Two sets of RCA and XLR connectors can output separately or simultaneously. It is recommended to choose XLR in priority for noise suppression and signal completeness. *XLR and RCA separate outputs are available to be selected to minimize the possibility of signal interference caused by simultaneous RCA and XLR outputs. The separate output mode supports better audio indicators and sound quality.
GND
+
-
Polarity Diagram
USB Type C Input
Use a USB-A to Type-C cable to connect this device with PC, playback devices and mobile phones with a USB audio output. Go to Settings > Source > USB-C In.
USB audio data cable
PC/player
Page 27
Mobile
USB Type-C/Lightning OTG audio cable
HIGH FIDELITY MUSIC STREAMER
Notes: *It is needed to install drives for Windows, please refer to Downloads section in this manual below. *Enable EVER SOLO DMP-A6 as your computers' sound output device as follows: Windows: After downloading and installing the driver, follow the setting on computer Control Panel > Hardware and Sound > Sound > Playback and select XMOS USB Audio. Mac: no need to install a driver, please select System Preferences > Sound > Output > EVER SOLO DMP-A6 . *USB input supports up to Stereo DSD512, PCM 768KHz 32Bit, MQA, actual specifications are subject to external playback hardware and software.
Optical/Coaxial Input
Use an Optical or Coaxial audio cable to connect front-end equipment (like media player and CD player) S/PDIF output with the device's Optical or Coaxial input. Go to Settings > Source > Internal Player > Optical/Coaxial In.
Optical or Coaxial audio cable
External playback device (CD player/digital decoder /player)
Notes: *Please use 75 Ohm Coaxial audio cable for Coaxial connection. *Please use standard optical audio cable for Optical connection. *Optical/coaxial input supports up to PCM 192KHz 24Bit, MQA and DOP64.
Page 28
HIGH FIDELITY MUSIC STREAMER
ARC Input
Use an HDMI cable to connect to a TV, projector, or other display device with HDMI eARC/ARC functionality to enable HDMI audio return channel (ARC). Please go "Source" to select the ARC Input.
HDMI cable
External display device (Support HDMI eARC/ARC)
Note: *Please connect to the HDMI input port on the TV labeled as ARC or eARC. *HDMI ARC input supports up to PCM 192KHz 24Bit. *Please use a physical HDMI cable for the connection, not an optical HDMI cable.
Bluetooth Input
This device has built in Qualcomm flagship QCC5125 Bluetooth audio receiver module, which supports lossless audio protocols SBC/AAC/aptX/aptX LL/aptX HD/LDAC. It can be used as a high quality Bluetooth decoder to pair with different mobile devices. Go to Settings > Source > Bluetooth In, enable Bluetooth on mobile devices and search DMP-A6 for Bluetooth pairing.
*Bluetooth reception format depends on transmitting device. Normally Android phones can switch Bluetooth output formats in system developer options, it is advised to choose aptX HD and LDAC lossless formats.
Page 29
HIGH FIDELITY MUSIC STREAMER
Downloads
For product firmware upgrade, USB driver and mobile control APP download, please visit the Downloads page on official website and scan QR code. Please unzip the package after downloading the driver, double click the .exe file and install it by following popup hints.
Control APP
Wechat Subscription
*It is recommended to scan the QR code with a mobile phone browser.
Special Note In order to improve the user experience, Eversolo will update firmware from time to time. Therefore, this product manual may differ from the actual setting menus of the product. For more tutorials, please visit www.eversolo.com
Safety Warning 1. No water splashing or dripping, do not put objects with liquid like vase on the device. 2. The power plug and the power switch are used to disconnect power supply, which cannot be blocked by other objects. 3. It is Class I device, there must be grounding measures inside the box when using.
Page 30
Eversolo DMP-A6 Gen 2 DMP-A6 Gen 2 DMP-A6 Gen 2 TidalQobuz HighresaudioAmazon MusicWebDAVUPnP ······· DMP-A6 Gen 2 HDMI DSD USB DMP-A6 Gen 2 XMOS 316 ES9038 Q2M DAC DSD512PCM 768Khz@32Bit MQA D/A DMP-A6 Gen 2 ES9038 Q2M DAC D/A XLRRCA DMP-A6 Gen 2 USB -C , CD 5.0 APTXHDLDAC DMP-A6 Gen 2
31
DAC USB DAC USB-C / HDMI ARC / HDMI USB
6.0 LCD
ES9038Q2M*2 XMOS XU316 4G DDR4 +32G eMMC
M.2 (NVMe PCIe 3.0) 2280 4TB SSD USB3.0*2
RJ-45(10/100/1000Mbps) 2.4G+5G
DSD512PCM 768KHz 32Bit MQA DSD(DSF,DFF,SACD ISO Support DST up to DSD512), MP3,APE,WAV,FLAC,AIF,AIFF,AAC,NRG,CUE
TidalQobuzHighresaudioAmazon Music
Roon Ready Tidal ConnectWebDavUPnPDLNA BT5.0 SBC/AAC/aptX/aptX LL/aptX HD/LDAC USB Windows7,10,11MacAndroidIOS DSD512 PCM 768KHz 32Bit MQA
PCM 192KHz 24Bit DSD64 DopMQA
PCM 192KHz 24Bit
PCM 192KHz 24Bit DSD64 DopMQA
DSD64 Native /PCM192KHz 5.1 DSD512 NativePCM 768KHz 32Bit MQA
UAC DAC XLR( )+RCA
Android/iPhone/iPad APP /Trigger out/
XLR 5 V; RCA 2.5V 20Hz~20KHz XLR/RCA ( 0. 15dB)
XLR > 128dB/RCA > 124dB XLR >128dB/RCA >124dB @A-Wt XLR<0.000092%(-120dB) /
RCA : <0.00011%(-119dB) XLR>125dB/RCA>124dB
AC 110~240V 50/60Hz 13W
32
SSD M.2 (NVMe PCIe3.0) 2280 4TB 1
2 SSD SSD
1 SSD 2 SSD SSD 3NTFS/EXFAT/FAT32 SSD 4 -> """NTFS"
33
5 Wi-Fi > " """"EversoloMusic" Wi-Fi
34
/ HDMI PCM/DSD USB 3.0 OTG / /PC - -USB OTG USB(Audio out):USB (DAC) CD CD USB -C OTG USB
XLR/RCA WiFi 12V 0V ARC HDMI eARC/ARC
* USB 1.2 A. USB (USB OTG USB AUDIO OUT )
* USB XLR/RCA *
35
LED
: / / / :
* 0.5db~3db
36
/ / 3
37
/ Home
/ ///
38
DMP-A6 Gen 2 SSDNAS ""
//
39
DMP-A6 Gen 2 WIFIWIFI >"">"WIFI"
""SSD SMBNFS""
40
DMP-A6 Gen 2
""
41
APPAPP APP
* .
42
SSDNFS SMB " "
SSD"SSD" " " SSD
43
*
APP APP *
44
CD
USBCD CD >"CD"CD-ROM" "CD
" "SSD NFSSMB
wavFLAC 45
RCA/XLRHDMI///DAC MQA MQA:USBSPDIF DACMQA
DAC
>"" >"XLR/RCA" >"DAC"DAC
46
47
>""
4 VUVU
48
Eversolo DMP-A6 Gen 2 APP >"" >"" "Eversolo Control" APP
APP
APPAPPDMP-A6
49
* IOS
* IOS"App Store""Eversolo Control"
>"" >""
USB -OTG
USB OTGUSB OTGUSB >"" >"USB OTG" >"PC"
50
>"" ""
51
>""""
>"" >"" EVER SOLO DMP-A6 UUUSB A >"" >"" *U *FAT32U *
52
DMP-A6 Gen 2 USBHDMI RCAXLR
USB
USB"USB AUDIO"DACUSB >"""USB DAC"
USB Type-A Type-B
USB Type-B
* USBDSD512 NativePCM 768KHz 32BitMQA
HDMI
HDMIHDMI DSDAV >"""HDMI"
HDMI
AV
*HDMI *HDMIDSD64 Native/PCM 192KHz
53
/
//AV >"""/"
/
AV /
*/PCM192KHz 24BitDOP64MQA
XLR/RCA
RCAXLRRCAXLR HiFi >"""RCA/ XLR"
RCA
XLR HiFi
HiFi /
54
* RCAXLR XLR *RCAXLRDMP-A6 Gen 2 XLRRCA XLRXLRRCA
+
-
USB Type C
USB-AType-CUSB >"""USB-C"
PC/
USB
55
USB Type-C/ Lightning OTG
* WindowsWindows * "EVER SOLO DMP-A6" Windows" > > > " "XMOS USB Audio" Mac,," > > ""EVER SOLO DMP-A6 " *USBDSD512PCM 768KHz 32BitMQA
/
S/PDIFCD / >""" "/""
CD /
/
*75 * */PCM 192KHz 24BitMQADOP64
56
ARC
HDMIHDMI eARC/ARCHDMI "ARC"
HDMI
HDMI eARC/ARC
*ARCeARCHDMI *HDMI ARCPCM 192KHz 24Bit *HDMIHDMIHDMI
QCC5125SBC/AAC/aptX/aptX LL/aptX HD/LDAC >"""" " DMP-A6 "
* aptX HDLDAC
57
USBAPP:www.eversolo.com exe
App
*
www.eversolo.com
1 2 3I
58
Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)