Greetings from realme Mobile
This guide will show you how to use the phone and its important functions. You may also visit the realme official website to get more information about the phone.
Device Overview
A diagram illustrates the front of the mobile phone, indicating key components: 'Front Camera' at the top, 'Receiver' near the top center, 'Volume Key' on the side, and 'Power Key' on the opposite side.
⚠️ Warning
- Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-pressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent battery overheating, which may lead to an explosion.
- The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
Charging and Operation
Charging
When charging, please place the device in an environment with normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperatures ranging from 5°C to 35°C.
Rebooting the Phone
Press and hold the Power Button and Volume Up Button simultaneously until the realme boot animation is displayed to reboot the phone.
Transferring Contents
You can quickly transfer contents such as photos, videos, music, contacts, messages, and apps from an old phone to a new phone via the realme Clone Phone app. Scan the QR code (provided in the original document) using the old phone to install "Clone Phone"; on the new phone, launch "Clone Phone" directly. Follow the on-screen prompts to complete the data transfer.
Standard Accessories
You are provided with the following standard accessories:
- 1 Phone
- 1 Charger
- 1 USB data cable
- 1 Safety Guide
- 1 Quick Guide
- 1 SIM Ejector Tool
Specifications
General Specifications
| Parameter | Value |
|---|---|
| Product | RMX3501 |
| Main screen parameter | 16.6cm(6.5") |
| Dimension | 164.7x76.2x8.4(mm) |
| Battery | 4890mAh/18.92Wh(Min) / 5000mAh/19.35Wh(Typ) |
| Camera | Front: 5Megapixels; Rear: 13Megapixels + 2Megapixels + 0.3Megapixels |
| Operating temperature | 0°C-35°C |
| SAR Values (Head) | <2.0W/kg |
| SAR Values (Body) | <2.0W/kg |
| CE SAR | (Label) |
Radio Waves Specifications
| Radio | Frequency (V1.0) | Frequency (V2.0) | Max. Output Power |
|---|---|---|---|
| GSM | 850MHz/900MHz | 33.5dBm | |
| GSM | 1800MHz | 31dBm | |
| GSM | 1900MHz | 30.5dBm | |
| WCDMA | Band 1 | Bands 1/2/4 | 24.5dBm |
| WCDMA | Bands 5/8 | Bands 5/8 | 24.5dBm |
| LTE FDD | Bands 1/3 | Bands 1/2/3/4/66 | 24dBm |
| LTE FDD | Bands 5/8/28 | Bands 5/8/12/17/26/28 | 24.5dBm |
| LTE FDD | Band 7 | Band 7 | 24dBm |
| LTE FDD | Band 20 | - | 25dBm |
| LTE TDD | Bands 38/40/41 | Bands 38/41 | 24dBm |
| Bluetooth | 2.4-2.4835GHz | 12dBm(EIRP) | |
| 2.4G Wi-Fi | 2.4-2.4835GHz | 20dBm(EIRP) |
FCC Regulations
This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference.
- (2) This device must accept any interference received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Note
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States.
During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with a separation of 1.5 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
This device complies with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement methods and procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3501.
For this device, the highest reported SAR value for usage against the head is XXX W/kg, for usage near the body is XXX W/kg.
While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements.
SAR compliance for body-worn operation is based on a separation distance of XX mm between the unit and the human body. Carry this device at least XX mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose belt clips or holsters which do not contain metallic components, to maintain a separation of XX mm between this device and your body.
RF exposure compliance with any body-worn accessory which contains metal was not tested and certified, and use such body-worn accessory should be avoided.
Regulatory
Steps to search E-label: Go to Settings > About Phone > Certificate Information.
