Linksys Max-Stream AC4000 MU-MIMO Wi-Fi Tri-Band Router (EA9300-CA) : Electronics
Connecting a Linksys Wireless-AC adapter to the 5 GHz wireless network of your Linksys Dual-Band or Tri-Band Wireless-AC router Windows® 10 The following steps are ONLY applicable to the Linksys Wireless-AC adapters that support Windows 10. IMPORTANT: If your computer or laptop has a built-in adapter, you need to DISABLE it before using the Linksys Wireless-AC adapter. For instructions on how to disable the wireless adapter of your Windows computer, click here. Step 1: On your system tray, click on the Wireless name. icon and select your 5 GHz wireless network QUICK TIP: Press the Windows key + D to reveal the Desktop. Step 2: Click on the Connect button. If you wish to connect to the network automatically upon start-up, check Connect automatically. Step 3: Enter your network security key or passphrase then click Next. Your wireless password is casesensitive. Step 4: You will be asked if you want to enable network discovery between the devices in your network. It is recommended to select Yes if you are setting up a home or work network. NOTE: The wireless icon on the system tray will change to , indicating it is now connected to your network with Internet. If there is no Internet connection, the icon displayed will be . Windows® 8.1 The following steps are ONLY applicable to the Linksys Wireless-AC adapters that support Windows 8.1. IMPORTANT: If your computer or laptop has a built-in adapter, you need to DISABLE it before using the Linksys Wireless-AC adapter. For instructions on how to disable the wireless adapter of your Windows computer, click here. Step 1: Press the Windows Step 2: key + D on your keyboard to show the Desktop. Click on the Wireless displayed. icon on the system tray. The list of available wireless networks will be Step 3: Select your 5 GHz network name from the list and click Connect. QUICK TIP: If you wish to connect to the network automatically upon start-up, check Connect automatically. Step 4: Enter your network security key or passphrase and click Next. Step 5: You will be asked if you want to enable sharing between the devices in your network. If you are setting up a home network, select Yes, turn on sharing and connect to devices. When the computer has been successfully connected to the wireless network, it will display the Wireless Connection icon. Windows® 7 The following steps are ONLY applicable to the Linksys Wireless-AC adapters that support Windows 7. IMPORTANT: If your computer or laptop has a built-in adapter, you need to DISABLE it before using the Linksys Wireless-AC adapter. For instructions on how to disable the wireless adapter of your Windows computer, click here. Step 1: Click on the Wireless Step 2: icon. Select your 5 GHz wireless network name from the list and click Connect. Step 3: On the Connect to a Network window, enter your network security key or passphrase and click OK. When the computer has been successfully connected to the wireless network, it will display the Wireless Connection icon.Microsoft Word 2016 Microsoft Word 2016