StarTech.com Quick-Start Guide

1U 4-Post Adjustable Mounting Depth Heavy Duty Shelf - 27.5in/700mm Depth

Product Diagram

The diagram shows a 1U server rack shelf. It is labeled with four numbered components:

Shelf Surface: The main body of the shelf, designed to mount server rack equipment. It is 27.5 inches (700mm) deep, not including the adjustable mounting brackets.
Ventilation Holes: These holes are designed to promote airflow for mounted equipment. They are specifically applicable to the ADJSHELFHDV / ADJSHELFHDV2 models.
Front Mounting Brackets: These brackets are used to fasten the shelf to the front posts of a server rack or cabinet. They feature holes on the sides to allow for depth adjustment, secured by M6x12 mm Panel Screws (x4).
Rear Mounting Brackets: Similar to the front brackets, these fasten the shelf to the rear posts of the rack or cabinet. They also have holes for depth adjustment, secured by M6x12 mm Panel Screws (x4).

A note indicates that the product may vary from the image.

Product Details

Model Numbers: ADJSHELFHD/ADJSHELFHD2/ADJSHELFHDV/ADJSHELFHDV2

Package Contents

1U Shelf Body x 1
Front Mounting Brackets x 2
Rear Mounting Brackets x 2
M6x12 mm Screws x 8
M6 Cage Nuts x 8 (Only included with Revision 2 or higher)
M6 Plastic Washers x 8
Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit:

For square cage holes, M6 cage nuts are included. For M6 threaded holes, no cage nuts are needed. Refer to the manufacturer of the rack to determine the mounting hole type.
Phillips head screwdriver
Cage nut tool (Optional)

Component and Functionality

Component	Function
1 Shelf Surface	Mount the server rack equipment. The 1U Shelf Body is 27.5in (700mm) deep, not including the adjustable mounting brackets.
2 Ventilation Holes	Promote air flow for the mounted equipment. Only applicable to ADJSHELFHDV / ADJSHELFHDV2.
3 Front Mounting Brackets	Fasten Shelf to the Front Posts of the rack or cabinet. Holes on the sides of the Mounting Brackets allow for Depth Adjustment. M6x12 mm Panel Screws (x 4) secure the Mounting Brackets to the desired depth.
4 Rear Mounting Brackets	Fasten Shelf to the Rear Posts of the rack or cabinet. Holes on the sides of the Mounting Brackets allow for Depth Adjustment. M6x12 mm Panel Screws (x 4) secure the Mounting Brackets to the desired depth.

Warnings!

Read the entire Quick-Start Guide and ensure the instructions are fully understood before assembling and using this product.

Before adding equipment to this product, ensure this product has been properly mounted.

Never operate this product if parts are missing or damaged.

Ensure the weight of the equipment does not exceed the weight capacity of this product. If the weight capacity is exceeded, personal injury or damage to the equipment is possible. This product can support the following weight:

ADJSHELFHD: Rev 01 - up to 175lbs / 80kg; Rev 02 or above - up to 330lbs / 150kg.
ADJSHELFHDV: Rev 01 - up to 250lbs / 113kg; Rev 02 or above - up to 330lbs / 150kg.
ADJSHELFHD2: up to 330lbs / 150kg.
ADJSHELFHDV2: up to 330lbs / 150kg.

The maximum supported weight is only possible when all four mounting brackets are properly mounted to all posts on a four post rack.

Arrange your equipment in the rack in descending order of weight. The lightest equipment is installed at the top of the rack, and the heaviest is on the bottom.

Installation

Locate a suitable location in the rack or cabinet to mount the Shelf. The Shelf requires 1U of Space. To mount the shelf leveled, ensure the mounting brackets are mounted on the same U height number. To determine this, most four posts racks or cabinets have labeled front and rear posts.
Determine the Depth of the Mounting Posts on the rack. The Adjustable Mounting Depth of the Shelf is from 19.5 in (495 mm) to 38.3in (974 mm).
Use a Phillips Head Screwdriver to Loosen the Panel Screws of the Front and Rear Mounting Brackets so they can slide freely. Each Mounting Bracket uses Two Panel Screws.
(Optional) Remove all the Panel Screws (x 8) of the Front and Rear Mounting Brackets if the adjustment requires different Depth Adjustment Holes on the sides of the Shelf.
Adjust the Front and Rear Mounting Brackets to achieve the same Mounting Depth as the Mounting Posts of the rack. Next, secure the Panel Screws (x 8) of the Front and Rear Mounting Brackets with a Phillips Head Screwdriver.
(Optional) Install the M6 Cage Nuts (x 8) into the appropriate Cage Nut Holes (x 8) on the chosen U Height Number on the Mounting Posts of the rack. Use a cage nut tool if available or your preferred installation method to install the M6 Cage Nuts.
Place the M6 Plastic Washers (x 8) onto the M6x12mm Screws (x 8).
Place the Shelf into the rack in the chosen U Height Number. Align the Mounting Holes of the Front Mounting Posts of the rack with the Front Mounting Brackets. Keep supporting the weight of the shelf.
Use a Phillips Head Screwdriver to install the M6x12mm Screws and fasten the Front Mounting Brackets to the Front Mounting Posts of the rack. Ensure the M6 Screws are properly tightened.
Repeat Step 8 for the Rear Mounting Brackets.
(Optional) Make minor depth adjustments to the Front and Rear Mounting Brackets as needed.

Additional Information

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a lifetime warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

Contact and Support

StarTech.com Ltd., 45 Artisans Crescent, London, Ontario N5V 5E9, Canada
StarTech.com LLP, 4490 South Hamilton Road, Groveport, Ohio 43125, U.S.A.
StarTech.com Ltd., Unit B, Pinnacle 15, Gowerton Road, Brackmills, Northampton NN4 7BW, United Kingdom
StarTech.com Ltd., Siriusdreef 17-27, 2132 WT Hoofddorp, The Netherlands

Regional Websites

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Models: ADJSHELFHD, ADJSHELFHDV, ADJSHELFHD2, ADJSHELFHDV2, 1U 4-Post Adjustable Server Rack Mount Shelf, 1U Adjustable Server Rack Mount Shelf, 4-Post Adjustable Server Rack Mount Shelf, Adjustable Server Rack Mount Shelf, Adjustable Rack Mount Shelf, Server Rack Mount Shelf, Rack Mount Shelf, Rack Shelf, Mount Shelf, Server Rack Shelf, Shelf, Rack, Server Rack, Server Shelf

File Info : application/pdf, 2 Pages, 251.14KB

30a94e9dadaf6eb45d40421b92fb1a94b7ec

References

Adobe PDF Library 17.0 Adobe InDesign 18.1 (Windows)

Related Documents

	StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Adjustable High Load Fixed Rackmount Shelf - Installation and Specifications Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.
	StarTech.com 1U Server Rack Shelf - 20-inch Deep Cantilever Rack Mount Enhance your 19-inch server rack with the StarTech.com SHELF-1U-20-FIXED-S 1U cantilever shelf. This durable 20-inch deep rack shelf supports up to 55 lbs, offering versatile storage for IT equipment and networking devices. Features robust steel construction, easy installation, and lifetime warranty.
	StarTech.com UNISLDSHF19 2U Adjustable Sliding Rack Shelf – 22.7kg StarTech.com UNISLDSHF19 2U adjustable depth sliding rack shelf for 19-inch server racks. TAA-compliant, supports 22.7kg, features locking mechanism. Ideal for non-rackmount equipment.
	StarTech.com CABSHELF116V2PK 1U Vented Server Rack Shelf - 16" Deep Durable 1U vented server rack shelf from StarTech.com (CABSHELF116V2PK) offering 44lb (20kg) capacity and 16" depth for 19" racks. Ideal for IT professionals and SOHO environments.
	StarTech.com 4POSTRACK8U Mobile 8U Open Frame 4-Post Server Rack Discover the StarTech.com 4POSTRACK8U, an 8U mobile open frame server rack designed for 19-inch IT and network equipment. Features adjustable depth, robust construction, and includes casters or leveling feet for versatile deployment.
	StarTech.com Adjustable Height Floating AV Wall Mount Shelf with Tempered Glass StarTech.com 2B-WALL-MOUNT-SHELF: A versatile floating AV wall mount shelf featuring two adjustable height tempered glass shelves, durable aluminum bracket, and integrated cable management for organizing AV equipment.
	StarTech.com 2-Post 6U Wall Mount Rack, Adjustable Depth A durable and adjustable 2-post 6U wall mount rack from StarTech.com, designed for 19-inch server, data, and networking equipment. Features adjustable depth up to 16 inches, 88lb weight capacity, and steel construction.
	StarTech.com 4POSTRACK8U 4-Post 8U Mobile Open Frame Server Rack Discover the StarTech.com 4POSTRACK8U, a versatile 8U mobile open frame server rack with adjustable depth, 19-inch compatibility, and options for wheels, leveling feet, or floor mounting. Ideal for IT professionals needing robust storage for servers, network, and AV equipment.