Assembly
Open shipping carton.
Assembly > Unboxing
Description: Open the shipping carton to access the generator. [Image: A cardboard box being opened.]
Remove brackets.
Assembly > Remove Shipping Support Brackets.
Description: Remove any shipping support brackets attached to the generator. [Image: Generator with arrows pointing to brackets being removed.]
Attach wheel kit.
Assembly > Install Wheel Kit
Description: Attach the wheel kit to the generator. This involves securing wheels (A) and the support leg (C) using bolts and washers (B). [Diagram shows wheels being attached to the frame, and a support leg with hardware.]
Connect the battery.
Assembly > Connect the Battery.
Description: Connect the red battery lead to the positive (+) red terminal on the battery. Connect the black negative battery lead to the negative (-) terminal. [Diagram shows battery with red and black cables being connected to positive and negative terminals respectively.]
Start Up
Add oil.
Assembly > Add Engine Oil.
Recommended: 10W-30, up to 37.2 fl. oz. (1.2 qt./1.1 L). DO NOT overfill.
Description: Add 10W-30 engine oil to the generator's oil fill port. Ensure the oil level does not exceed the recommended capacity. [Image: Oil fill port on generator with a 10W-30 oil bottle ?️ and a warning symbol ⚠️ for not overfilling.]
Move the generator outdoors.
Description: Move the generator to an open, outdoor area. Point the exhaust away from any structures or people. Never run the generator in enclosed areas (e.g., not in a house or garage). Keep all objects at least 5 feet (1.5 m) from the generator. Heat from the muffler and exhaust gas can ignite combustible materials. [Diagram shows a generator in an open area with an arrow pointing exhaust away, and a distance indicator showing 5ft/1.5m.]
Add fuel.
Assembly > Add Fuel
DO NOT use E15 or E85.
Description: Add fuel to the generator's fuel tank. Only use approved fuel types; do not use E15 or E85 gasoline. [Image: Fuel cap on generator with fuel can ⛽ nearby, and E15/E85 labels with a cross ❌ through them.]
Prepare for starting.
Description: Ensure no electrical devices are plugged in or turned on before starting or stopping the generator. [Image: Electrical outlet symbol ? with a red circle and slash ❌, and warning signs stating "NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!"]
Turn the fuel valve “ON”.
Description: Open the fuel valve to the "ON" position to allow fuel flow. [Image: Fuel valve handle in the ON position.]
Start the generator (Electric Start).
1. Pull the choke knob out to the “CHOKE” position.
2. Press and hold the ignition switch to the “START” position.
3. Push the choke knob in to the "RUN" position.
Description: To start the generator using the electric start system: pull the choke knob to the [choke position], press and hold the ignition switch to the [start position], then push the choke knob to the [run position]. [Diagram shows sequence: choke out, ignition switch pressed, choke in.]
Start the generator (Manual Start).
1. Pull the choke knob out to the "CHOKE" position.
2. Push the ignition switch to the "ON" position.
3. Pull the starter cord.
4. Push the choke knob in to the “RUN” position.
Description: To start the generator manually: pull the choke knob to the [choke position], push the ignition switch to the [on position], pull the starter cord, then push the choke knob to the [run position]. [Diagram shows sequence: choke out, ignition switch on, pull cord, choke in.]
Connect electrical loads.
Operation > Connecting Electrical Loads.
Description: Once the generator is running smoothly, you can plug in your electrical devices. [Image: Generator with a green checkmark ✔️ and an electrical plug symbol ?, indicating readiness to connect loads.]
