Somfy ation
Drapery Order Form Date of Order: ______________ Account #________________________________ P.O. # _____________________ Sidemark:__________________ Special Shipping Directions: ________________________________________________________________________________________________ SOLD TO: Business Name:_______________________________________________ Address:____________________________________________________ City:____________________________ State: _______ Zip:____________ Phone: ______________________ Fax #: __________________________ Email: _____________________________________________________ Ordered By: __________________________________________________ Signature:___________________________________________________ SHIP TO: Business Name:_______________________________________________ Address:____________________________________________________ City:____________________________ State: _______ Zip:____________ Contact Name: ________________________________________________ Phone: ______________________ Fax #: _________________________ Email: _____________________________________________________ ORDER DETAIL: Please see next page for glossary and definition of terms. 1 2345 67 89 10 11 12 Item # Room QTY. Motor Width Tandem Motor *Track Track Stack **If Bent: Carrier Bracket Butt Splice Part No. (in.) Side Type Color (L/R/S) # of Type bends Part # QTY. Master ex. Living Room 1 1003152 144 Y/N L F WHT/BRZ S 2 RF80 1780907 7 NO X 1 2 3 4 5 6 * For curved tracks, Somfy requires a template be provided. Please see Directions for Creating a Template for Drapery Curves for template information. ** For bent tracks, Somfy does not require a template. Please include the Bent Drapery Tracks Measurement Form for exact measurements per angle and return. NOTE: Somfy includes a center splice every 16' of track. Please indicate in the "SPECIAL INSTRUCTIONS" section if your requirements differ from Somfy's standard. CONTROLS: In the space provided below, please list the part number(s) for the control(s) you desire. Given the nature of custom motorization products, control options and compatibility varies dramatically. If you would like further assistance with control options, simply note it in the field below and one of our customer service specialists will contact you upon the submission of your order. SPECIAL INSTRUCTIONS Please send to: e-mail: ordering_us@somfy.com Fax: 609-495-8117 (Continued on next page) 1 Motor Part Number Glydea® ULTRA 35 Motor RTS with 10' Plug Glydea® ULTRA 35 Motor DCT with 10' Plug Glydea® ULTRA 60 Motor RTS with 10' Plug Glydea® ULTRA 60 Motor DCT with 10' Plug Glydea® ULTRA 35 Wired Motor with 10' Plug Glydea® ULTRA 60 Wired Motor with 10' Plug IrismoTM 35 (Mini DC) RTS IrismoTM 35 (Mini DC) DCT IrismoTM 45 WireFree RTS 1003152 1003151 1003159 1003158 1003153 1003160 1003004 1003003 1002353 2 Width (Inches) Motorized drapery tracks are custom built according to the specified width. Please note that the finished track width is measured pulley end to pulley end. For bent and curved tracks please provide the total of all wall measurements. When fabricating your drapery please add 1.5" to your return. 3 Tandem Y=Yes N=No Tandem motorized systems utilize two drapery motors. Items needed for tandem systems should be noted in the Special Instructions Section of the order form. Tandem alternative = 2 one way tracks Requires Glydea ULTRA DCT or IRISMO 35 DCT motors. 4 Motor Side L=Left Side R=Right Side Choose the motor side best suited for your installation. 5 Track Type A-I See below O=Other NOTE: Somfy requires a template for all curved tracks. Add an "S" after Track Type for Silent Master Carrier option (ie., "A-S"). Please see Directions for Creating a Template for Drapery Curves for necessary information. A One way D One way w/Bend G Center Opening w/2 Bends B Center Opening R = 30 cm max (11.8") E Center Opening w/Bend H R = 30 cm max (11.8") One Way w/ Continuous Curve C Asymetrical R = 30 cm max (11.8") F One way w/ 2Bends R = 30 cm max (11.8") R = 300 cm max (118") I Center Opening w/Continuous Curve R = 300 cm max (118") 6 Track Color - White or Bronze 7 Stack L=Left R=Right S=Split 8 If Bent: # of Bends 1=1 Bend, 2=2 Bends, 3=3 Bends, etc NOTE: Somfy requires exact angle measurements for all bent tracks. Please submit completed and signed Bent Drapery Track Measurement Form with all bent track orders. 9 Carrier/Runner Type 1=1 Bend, 2=2 Bends, 3=3 Bends, etc SPP=Silent Pinch Pleat (QTY of 3 per foot included) PP=Pinch Pleat (QTY of 3 per foot included) RF80 = RippleFold® 80% fullness (QTY of 5 per foot spaced every 2 3/8" included) RF100 = RippleFold® 100% fullness (QTY of 6 per foot spaced every 2 1/8" included) RF120 = RippleFold® 120% fullness (QTY of 7 per foot spaced every 1 7/8" included) 10 Brackets NOTE: Brackets are not included and must be ordered separately. Part Numbers White Bronze One Touch Ceiling Bracket (not recommended for curved tracks).......# 1780907...........# 1782865 4.5"-6" Wall Mount Bracket.................................................................# 1782054...........# 9025621 8.75"-10.25" Double Wall Mount Bracket...........................................# 1782053...........# 9025622 Swivel Ceiling Bracket (strongly recommended for curved tracks).....# 1780906...........# 1782864 Somfy recommends one (1) bracket by each pulley and one (1) bracket every 24". Additionally, one (1) bracket should be placed on each side of a splice if used. 11 Butt Master Y=Yes N=No Only available for RippleFold® center opening systems. Quantity 2 required; please note item numbers in Special Instructions Section of the order form item #1780953. 12 Splice X=Special splice instructions Somfy includes a center splice every 16ft of track. Please indicate in the Special Instructions Section if your requirements differ from Somfy's standard. © Somfy Systems, Inc. 10/2021 P-0009Adobe InDesign 16.4 (Macintosh) Adobe PDF Library 16.0