Klipsch ProMedia 2.1 Bluetooth Computer Speakers - Owner's Manual
Speaker Placement
This section describes how to position your Klipsch ProMedia 2.1 Bluetooth speakers for optimal sound. The satellite speakers are typically placed on a desk or shelf, facing the listener. The subwoofer can be placed on the floor or a stable surface, often near the desk. Wall mounting is possible using the 1/4" 20-thread mounting points on the satellite speakers, but wall brackets are not included.
Speaker Connection
Connect the system as follows:
- Connect the power cord to the subwoofer and then to a wall power outlet.
- Connect the left and right satellite speakers to the corresponding "PREAMP OUT" and "INPUT" jacks on the back of the subwoofer.
- Connect your audio source (e.g., computer, smartphone) to the subwoofer's input. This can be done via USB or an auxiliary (Aux) cable.
- For Bluetooth connection, ensure the system is powered on and ready to pair.
The diagram illustrates the physical connections between the subwoofer, satellite speakers, power source, and audio input device.
Bluetooth® Wireless Technology
To connect wirelessly via Bluetooth:
- On one of the satellite speakers, press and hold the Bluetooth button for 3 seconds. The indicator light will turn blue, indicating it is in pairing mode.
- On your Bluetooth-enabled device (e.g., smartphone, tablet, computer), navigate to the Bluetooth settings.
- Turn on Bluetooth if it is not already enabled.
- Scan for available devices and select "Klipsch PM2.1BT" from the list.
- Once paired, the indicator light on the speaker will remain solid blue, and your device will show "Connected".
The system supports Bluetooth audio streaming.
Controls
The satellite speakers feature controls for adjusting sound levels and managing sources:
| Action | Function |
|---|---|
| Short Press (on speaker) | Increase Sub Level 1dB / Decrease Sub Level 1dB |
| Long Press (3 Seconds) (on speaker) | Increase Volume 1dB / Decrease Volume 1dB |
| Long Press (10 Seconds) (on speaker) | Source Select (Cycles through Aux > Bluetooth > USB) |
| Long Press (10 Seconds) | Enter Pairing Mode / Factory Reset |
The diagram shows a satellite speaker with arrows indicating control functions for subwoofer level and volume.
Volume
Volume can be adjusted using the controls on the satellite speaker (long press for 1dB increments). The system also includes a headphone jack on the subwoofer for private listening.
Support and Troubleshooting
For assistance with your Klipsch product, visit KLIPSCH.COM/SUPPORT or scan the provided QR code with your smartphone or tablet.
To ensure optimal performance, firmware updates may be available. Obtain the latest firmware files and instructions at KLIPSCH.COM/FIRMWARE.
Important Safety Instructions
Please read and follow all safety instructions to prevent hazards such as electric shock or fire.
- READ and KEEP these instructions.
- HEED all warnings and FOLLOW all instructions.
- DO NOT use the apparatus near water.
- CLEAN ONLY with a dry cloth.
- DO NOT block ventilation openings.
- DO NOT install near heat sources like radiators or stoves.
- PROTECT the power cord from being walked on or pinched.
- ONLY USE attachments/accessories specified by the manufacturer.
- UNPLUG during lightning storms or when unused for long periods.
- REFER all servicing to qualified service personnel.
- DO NOT expose to dripping or splashing; do not place liquid-filled containers on the apparatus.
- To disconnect, pull the plug from the AC receptacle.
- DO NOT overload outlets or extension cords.
- Ensure minimum 10 cm (4 inches) ventilation around the apparatus.
- DO NOT place naked flame sources (e.g., candles) on the product.
- The exclamation point ? within an equilateral triangle alerts to important operating and maintenance instructions.
- The lightning flash ⚡ symbol within an equilateral triangle alerts to the presence of uninsulated "dangerous voltage" inside.
- WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
- WARNING: No naked flame sources – such as candles – should be placed on the product.
- CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
- This equipment is a Class II or double insulated electrical appliance and does not require a safety connection to electrical earth.
Compliance Information
EU Compliance: This product is eligible to bear the CE mark and conforms to various European Union directives, including Low Voltage, EMC, WEEE, Eco-Design, R&TTE, and RoHS2. A Declaration of Conformity can be obtained by contacting the dealer, distributor, or Klipsch Group, Inc. worldwide headquarters at www.klipsch.com/Contact-Us.
WEEE Notice: This mark applies to EU countries and Norway. It indicates that the product should not be disposed of with household waste but should be deposited at an appropriate facility for recovery and recycling.
FCC and Canada EMC Compliance: This device complies with Part 15 of the FCC Rules and applicable Canadian regulations. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. This equipment has been tested and found to comply with the limits for a Class B digital device. Modifications not expressly approved by the manufacturer may void the user's authority to operate the device. The equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This Class B digital apparatus complies with Canadian ICES-003. The license-exempt transmitter/receiver complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
