TEST REPORT IEC 62841-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety
*图或文字中所提及的配件，有些并不包括在供货范围. 内。 机器规格. WX822 WX822.X*. 电压. 20V. 最大**. 空载转速.
.
Test Report issued under the responsibility of:
TEST REPORT IEC 62841-1
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery Safety
Report Reference No. .....................: 191000962SHA-001
Date of issue.....................................: Nov 25, 2019
Amendment 1: Aug 09, 2021
Total number of pages......................: 11 pages
Applicant's name ............................: Positec Technology (China) Co., Ltd.
Address ............................................. :
18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P.R.China
Test specification:
Standard ...........................................: IEC 62841-1: 2014 (First Edition) + C1: 2014 + C2: 2015
Test procedure..................................: CE-MD
Non-standard test method..............: None
Test Report Form No. .....................: IEC62841_1B
Test Report Form(s) Originator ........: DEKRA Certification B.V.
Master TRF.......................................: 2019-04-12
Copyright © 2019 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this Test Report.
Page 2 of 11 Test item description....................... : Battery-powered Delta Sander
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Trade Mark .........................................: WORX
Manufacturer.......................................: Same as applicant Model/Type reference.........................: WX822, WX822.* (* = A to Z or 0-9 which means different package
and/or accessories)
Ratings................................................: 20Vd.c., n0:12000/min
Remark ...............................................: All models are identical with each other except for the trade mark, package and/or accessories.
Battery charger system as below:
Battery pack WA3550 WA3550 WA3550 WA3550 WA3551 WA3551 WA3551 WA3551 WA3551 WA3553 WA3553 WA3553 WA3553 WA3553 WA3641 WA3641 WA3641 WA3641 WA3572 WA3572 WA3572 WA3572
Charger WA3760 WA3860 WA3869 WA3765 WA3760 WA3860 WA3869 WA3765 WA3880 WA3860 WA3880 WA3869 WA3760 WA3765 WA3760 WA3860 WA3869 WA3765 WA3860 WA3760 WA3869 WA3765
TRF No. IEC62841_1B
Page 3 of 11 Testing procedure and testing location:
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Testing Laboratory:
Intertek Testing Services Shanghai Limited.
Testing location/ address.............................: Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China
Tested by (name + signature) ......................: Loki Ying (Certification Engineer)
Approved by (name + signature).................: Michael Shen (Mandated Reviewer)
Testing procedure: CTF Stage 1: Testing location/ address.............................: Tested by (name + signature) ......................: Approved by (name + signature).................:
Testing procedure: CTF Stage 2: Testing location/ address.............................: Tested by (name + signature) ......................: Witnessed by (name + signature)................: Approved by (name + signature).................:
Testing procedure: CTF Stage 3: Testing procedure: CTF Stage 4: Testing location/ address.............................: Tested by (name + signature) ......................: Witnessed by (name + signature)................: Approved by (name + signature).................: Supervised by (name + signature) ..............:
TRF No. IEC62841_1B
Page 4 of 11
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
List of Attachments (including a total number of pages in each attachment): Attachment: Photos, pages 11
Summary of testing:
The samples were tested according to IEC 62841-1: 2014 + C1: 2014 + C2: 2015 with EN deviation from EN 62841-1: 2015+AC: 15, IEC 62841-2-4: 2014 (First Edition) + C1: 2015 with EN deviation from EN 62841-2-4: 2014 and found to comply with the standards' requirements. Determination of the test conclusion is based on IEC Guide 115 in consideration of measurement uncertainty. Tests performed (name of test and test clause): Testing location:
Clause K.12.1, K12,201, K.18.1, K18,201, K18,202 Intertek Testing Service Shanghai Limited.
Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China
Summary of compliance with National Differences: List of countries addressed: EUROPEAN GROUP
The product fulfils the requirements of EN 62841-2-4: 2014 with EN 62841-1: 2015+AC: 15.
Copy of marking plate (representative): Please refer to Report No. 191000962SHA-001.
TRF No. IEC62841_1B
Page 5 of 11 Test item particulars .................................................. :
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Category of equipment.............................................. : Hand held, Transportable, Lawn / Garden
Protection Class of tool............................................. : Battery-powered tool
Method of supply cord attachment ......................... : Battery-powered tool
Duty conditions .......................................................... : Normal, severe, extra-severe
Type of operation ....................................................... : Normal, short-time, intermittent
Degree of protection .................................................. : IP20
Accessories and detachable parts included .......... : Dust bag
Other options included.............................................. : N/A
Possible test case verdicts:
- test case does not apply to the test object ...........: N/A or N (Not Applicable)
- test object does meet the requirement ..................: P (Pass)
- test object does not meet the requirement ...........: F (Fail)
Testing ..........................................................................:
Date of receipt of test item.........................................: July 10, 2021
Date (s) of performance of tests ...............................: July 10, 2021 Aug 09, 2021
General remarks:
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma / point is used as the decimal separator.
Manufacturer's Declaration per sub-clause 4.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided................................................................:
Yes Not applicable
When differences exist, they shall be identified in the General product information section.
Name and address of factory (ies) ..........................: CHANGZHOU STADARD ELECTRIC APPLIANCE CO.,LTD
NO.29 The Chunqiu Road Minghuang Industrial Wujin Changzhou, P.R.China.
General product information: The products covered in this report are hand-held motor-operated battery-powered sanders.
Amendment 1:
The original report 191000962SHA-001 issued on Nov 25, 2019 was modified including following changes and/or additions:
1. Added alternative battery cells in component list.
TRF No. IEC62841_1B
Clause
Requirement + Test
Page 6 of 11 IEC 62841-1
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Result - Remark
Verdict
23
COMPONENTS
P
23.1
Components comply with relevant IEC standards See Table 23.1
P
Batteries are regarded as part of the tool and comply
P
with Annexes K and/or L
Components used in accordance with their markings
P
Applied exceptions ...................................................:
N/A
Components not previously tested and found to
comply with the relevant IEC
P
comply with the relevant IEC standard for the
standard
number of cycles specified, tested to 23.1.1 ...
23.1.11 ......................................................................:
ANNEX K BATTERY TOOLS AND BATTERY PACKS
P
K.12.1
Tool operated at no-load until maximum temperature Until battery discharged
P
reached or battery discharged.................................:
No operation of protective devices during heating
P
test
Temperature rises met values in Table 2
P
K.12.201 Charging of lithium-ion battery under normal
P
conditions did not exceed specified operating region
for charging of the cell
Charging procedure as specified
P
Voltage, temperature and charging current
P
monitored for all individual cells
Test repeated with imbalanced battery
P
K.18.1
Risk of fire or electric shock as a result of abnormal
P
operation obviated as far as is practical
No charring or burning of gauze or tissue paper
See Table K.18.1
P
resulted when battery tool and battery pack were
subjected to any abnormal operations, tests a) to f)
No explosion during or after the test
P
Adequate protection against electric shock
P
Component(s) or conductors(s) that interrupt or limit See Table K.18.1
P
the discharge current that operated operate during
the above tests a) to f) ............................................:
Test repeated two more times for devices relied
P
upon to pass the test; devices opened the circuit in
the same manner
Test repeated with the open-circuited device bridged
N/A
TRF No. IEC62841_1B
Clause
Requirement + Test
Page 7 of 11 IEC 62841-1
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Result - Remark
Verdict
Protective electronic circuits whose function is relied
N/A
on to pass a test regarded as providing a SCF and
comply with 18.8 with a PL = a
K.18.201 Risk of fire and explosion as a result of abnormal
P
operation during charging of a lithium-ion battery is
obviated as far as is practical
No charring or burning of gauze or tissue paper, no See Table K.18.201
P
explosion resulted when battery tool and battery
pack were subjected to any abnormal conditions a)
to d)
The cells did not exceed the upper limit charging
P
voltage by more than 150 mV unless...
...charging system permanently was disabled from
N/A
recharging the battery
No evident damage to the cell vent to impair
P
compliance with Subclause K.21.202.
K.18.202 No risk of fire or explosion when main discharge
P
connections of a series configured, integral Li-ion
battery, detachable or separable Li-ion battery pack
were shorted under extreme imbalance
All cells fully charged, one cell fully discharged
P
Main discharge connections of the battery were
P
shorted, resistance 10 m
No explosion during or after the test
P
No charring or burning of the gauze or tissue paper
P
Component(s) or conductors(s) that interrupt or limit
P
the discharge current that operated operate during
the above tests .......................................................:
Test repeated two more times for devices relied
P
upon to pass the test; devices opened the circuit in
the same manner
Test repeated with the open-circuited device bridged
N/A
Protective electronic circuits whose function is relied
N/A
on to pass a test regarded as providing a SCF and
comply with 18.8 with a PL = a
TRF No. IEC62841_1B
Clause
Requirement + Test
Page 8 of 11 IEC 62841-1
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Result - Remark
Verdict
23.1
TABLE: Critical components information (Added in component list)
Object / part No. Manufacturer/ Type / model trademark
Battery cell
Jiangsu Tenpower Lithium Co., Ltd.
ICR18650 2000mAh
Union Lithplus
Alt
Energy (Liaoning)
L1865-2.0
Corp.
Technical data Standard
3,7V 2000mAh
Li-ion (For
battery pack WA3551 series
IEC 62133-2
and WA3553
series use)
3,6V 2000mAh
Li-ion (Only for
battery pack IEC 62133-2
WA3551 series
use)
P Mark(s) of conformity1)
CB/ DK86779-UL
CB/DK116083-UL
TRF No. IEC62841_1B
Clause
Requirement + Test
Page 9 of 11 IEC 62841-1
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Result - Remark
Verdict
K12.1
TABLE: Normal Temperature Test for Battery Tool
Ambient temperature (°C) ...................................... : 21,0
Measurement at:
Temperature rise (K)
External enclosure of tool
5,0
External enclosure of battery pack
6,2
Handles, continuously held
3,5
Supplementary Information:
Test with battery pack WA3553 (Tenpower cell).
K12.1
TABLE: Normal Temperature Test for Battery Tool
Ambient temperature (°C) ...................................... : 21,0
Measurement at:
Temperature rise (K)
External enclosure of tool
4,8
External enclosure of battery pack
5,6
Handles, continuously held
3,1
Supplementary Information:
Test with battery pack WA3551 (Lithplus cell).
P Allowed Limit (K) 60 60 50
P Allowed Limit (K) 60 60 50
K.18.1 TABLE: Battery Tool Abnormal Operation
P
Abnormal conditions
Explosion Charring or Protector Test repeated occurred? burning of test Operated? 3 more times?
materials?
a) Terminals of detachable battery pack with exposed
N/A
terminals shorted
N/A
N/A
N/A
b) Motor terminals shorted
No
No
Yes
Yes
c) Motor rotor locked
No
No
Yes
Yes
d) Cord between battery tool and separable battery
N/A
pack shorted
N/A
N/A
N/A
e) Cord provided the tool and the charger shorted
N/A
N/A
N/A
N/A
f) Any two uninsulated parts of opposite polarity in
N/A
N/A
N/A
N/A
battery tools shorted
Supplementary Information: None.
TRF No. IEC62841_1B
Clause
Requirement + Test
Page 10 of 11 IEC 62841-1
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Result - Remark
Verdict
K.18.201 TABLE: Lithium-ion charging systems Abnormal Operation
Abnormal conditions
Explosion occurred?
Charring or burning of
test materials?
Upper limit charging voltage
not exceeded by >150 mV1)
Charging system permanently disabled?2)
a) Components in the charging
No
No
Yes
No
system faulted as in 18.6.1 b) to
f)
b) One cell 50% charged in a
N/A
N/A
N/A
N/A
fully discharged battery
c) Charging of a series
No
No
Yes
No
configured battery with all cells
50% charged, one cell shorted
d) Short across a component or
No
No
Yes
No
between adjacent PCB tracks
Supplementary Information: One of conditions 1) or 2) is sufficient to achieve compliance with this subclause.
P Cell vent damaged?
No
N/A No
No
TRF No. IEC62841_1B
Page 11 of 11 Photo
Report No. 191000962SHA-001 Amendment 1: Aug 09, 2021
Inner view of WA3551 (Lithplus cell)
Inner view of WA3553 (Tenpower cell) TRF No. IEC62841_1B
.
Test Report issued under the responsibility of:
TEST REPORT IEC 62841-2-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2-4: Particular requirements for hand-held sanders and polishers other than
disk type
Report Reference No. .....................: 191000962SHA-002
Date of issue.....................................: Nov 25, 2019 Amendment 1: Aug 09, 2021
Total number of pages......................: 6 pages
Applicant's name ............................: Positec Technology (China) Co., Ltd.
Address.............................................: 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P.R.China
Test specification:
Standard ...........................................: IEC 62841-2-4: 2014 (First Edition) + C1: 2015 for use in combination with IEC 62841-1: 2014 (First Edition) + C1: 2014 + C2: 2015
Test procedure..................................: CE-MD
Non-standard test method..............:
None
Test Report Form No. .....................: IEC62841_2_4A
Test Report Form(s) Originator ........: DEKRA Certification B.V.
Master TRF.......................................: 2014-09
Copyright © 2014 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this Test Report.
Page 2 of 6
Report No. 191000962SHA-002 Amendment 1: Aug 09, 2021
Test item description....................... : Battery-powered Delta Sander
Trade Mark .........................................: WORX
Manufacturer.......................................: Same as applicant Model/Type reference.........................: WX822, WX822.* (* = A to Z or 0-9 which means different package
and/or accessories)
Ratings................................................: 20Vd.c., n0:12000/min
Remark ...............................................: All models are identical with each other except for the trade mark, package and/or accessories.
TRF No. IEC62841_2_4A
Page 3 of 6 Testing procedure and testing location:
Report No. 191000962SHA-002 Amendment 1: Aug 09, 2021
Testing Laboratory:
Intertek Testing Services Shanghai Limited.
Testing location/ address.............................: Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China
Associated Testing Laboratory:
Testing location/ address.............................:
Tested by (name + signature) ......................: Loki Ying (Certification Engineer)
Approved by (name + signature).................: Michael Shen (Mandated Reviewer)
Testing procedure: TMP/CTF Stage 1: None Testing location/ address.............................: Tested by (name + signature) ......................: Approved by (name + signature).................:
Testing procedure: WMT/CTF Stage 2: None Testing location/ address.............................: Tested by (name + signature) ......................: Witnessed by (name + signature)................: Approved by (name + signature).................:
Testing procedure: SMT/CTF Stage 3 or 4:
None
Testing location/ address.............................:
Tested by (name + signature) ......................:
Witnessed by (name + signature)................:
Approved by (name + signature).................:
Supervised by (name + signature) ..............:
TRF No. IEC62841_2_4A
Page 4 of 6
Report No. 191000962SHA-002
Amendment 1: Aug 09, 2021
List of Attachments (including a total number of pages in each attachment):
None.
Summary of testing:
The samples were tested according to IEC 62841-1: 2014 + C1: 2014 + C2: 2015 with EN deviation from EN 62841-1: 2015+AC: 15, IEC 62841-2-4: 2014 (First Edition) + C1: 2015 with EN deviation from EN 62841-2-4: 2014 and found to comply with the standards' requirements.
Determination of the test conclusion is based on IEC Guide 115 in consideration of measurement uncertainty.
Tests performed (name of test and test clause): Testing location:
Clause K.12.1, K12,201, K.18.1, K18,201, K18,202 Intertek Testing Service Shanghai Limited.
Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China
Summary of compliance with National Differences: List of countries addressed: EUROPEAN GROUP
The product fulfils the requirements of EN 62841-2-4: 2014 with EN 62841-1: 2015+AC: 15.
Copy of marking plate (representative): Please refer to 191000962SHA-001 for copy of marking plate.
TRF No. IEC62841_2_4A
Page 5 of 6 Test item particulars .................................................. :
Report No. 191000962SHA-002 Amendment 1: Aug 09, 2021
Category of equipment.............................................. : Hand held, Transportable, Lawn / Garden
Protection Class of tool............................................. : Battery-powered tool
Method of supply cord attachment ......................... : Battery-powered tool
Duty conditions .......................................................... : Normal, severe, extra-severe
Type of operation ....................................................... : Normal, short-time, intermittent
Degree of protection .................................................. : IP20
Accessories and detachable parts included .......... : Dust bag
Other options included.............................................. : N/A
Possible test case verdicts:
- test case does not apply to the test object ...........: N/A or N (Not Applicable)
- test object does meet the requirement ..................: P (Pass)
- test object does not meet the requirement ...........: F (Fail)
Testing ..........................................................................:
Date of receipt of test item.........................................: July 10, 2021
Date (s) of performance of tests ...............................: July 10, 2021 Aug 09, 2021
General remarks:
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma / point is used as the decimal separator.
Manufacturer's Declaration per sub-clause 4.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided................................................................:
Yes Not applicable
When differences exist, they shall be identified in the General product information section.
Name and address of factory (ies) ..........................: CHANGZHOU STADARD ELECTRIC APPLIANCE CO.,LTD NO.29 The Chunqiu Road Minghuang Industrial Wujin Changzhou, P.R.China.
General product information: The products covered in this report are hand-held motor-operated battery-powered sanders.
Amendment 1: The original report 191000962SHA-002 issued on Nov 25, 2019 was modified including following changes and/or additions:
TRF No. IEC62841_2_4A
Page 6 of 6 1. Added alternative battery cells in component list.
Report No. 191000962SHA-002 Amendment 1: Aug 09, 2021
TRF No. IEC62841_2_4A
AP01364901
(5)
Pantone 151C
(100h)
(100h),
P151C
iconM100Y100
UV
12000 OPM 20V
WX822.9
20V Cordless Detail Sander
LOW VIBRATION
12000 OPM 20V
WX822.9
20V Cordless Detail Sander
12000 OPM 20V
WX822.9
20V Cordless Detail Sander
YEARS
*
LIMITED
WARRANTY
LOW VIBRATION
AP01364901
Battery not included
LOW VIBRATION
FINGER SANDING
HOOK & LOOP
TOOL ONLY**
FINGER SANDING
HOOK & LOOP
TOOL ONLY**
Copyright © 2023, Positec. All Rights Reserved.
* EN See warranty card for more details D Weitere Details siehe Garantiekarte F Voir carte de garantie pour plus de détails I Per maggiori dettagli vedere la scheda di garanzia ES Para obtener más información, consulte la tarjeta de garantía PT Para obter mais informações, consulte o cartão de garantía NL Zie garantiekaart voor meer informatie DK Se garantibeviset for yderligere oplysninger RU .
NOR Se garantikortet for ytterligere informasjon SV Läs på garantikortet för mer information PL Wicej informacji zawarto w karcie gwarancyjnej GR . HU További részletekért lásd a jótállást RO Consultai cardul de garanie pentru mai multe detalii CZ Podrobné informace jsou uvedeny na zárucním list SK Podrobné informácie sú uvedené na zárucnom liste SL Za podrobnosti, glejte garancijski list
12000 OPM 20V
WX822.9
20V Cordless Detail Sander
FINGER SANDING
HOOK & LOOP
TOOL ONLY**
NOR Bare verktøy, batteri og lader ikke inkludert. SV Endast verktyget, batteri och laddare ingår ej. PL Tylko narzdzie, zestaw nie zawiera baterii ani ladowarki. GR , . HU Csak eszköz, elemet és töltt nem tartalmazza. RO Doar unealta, acumulatorul i încrctorul nu sunt incluse. CZ Pouze pístroj, nabíjecka baterií není soucástí balení. SK Len nástroj, balenie nezaha batériu ani nabíjacku. SL Samo orodje, baterija in polnilnik nista prilozena.
** EN Tool only, battery and charger not included. D Nur Werkzeug; Akku und Ladegerät nicht enthalten. F Outil uniquement, batterie et chargeur non inclus. I Solo lo strumento, la batteria e il caricabatteria non sono inclusi. ES Solamente herramienta, batería y cargador no incluidos. PT Apenas ferramenta, bateria e carregador não incluídos. NL Alleen gereedschap, batterij en oplader niet inbegrepen. DK Kun værktøj, batteri og oplader medfølger ikke. RU , .
12000 OPM 20V
WX822.9
20V Cordless Detail Sander
3
3
EN Dustop micro filter for a cleaner working environment D Dustop-Mikrofilter für ein sauberes Arbeitsumfeld F Micro filtre Dustop pour un environnement de travail plus propre I Dustop Microfiltro per un ambiente di lavoro più pulito ES Micro filtro Dustop para un ambiente de trabajo más limpio PT Micro filtro Dustop para um ambiente de trabalho mais limpo NL Dustop-microfilter voor een schonere werkomgeving DK Dustop mikrofilter giver et renere arbejdsmiljø RU NOR Dustop-mikrofilter for et renere arbeidsmiljø SV Dustop-mikrofilter för en renare arbetsmiljö PL Dustop-Mikrofiltr zapewnia czystsze rodowisko pracy GR Dustop HU Dustop mikroszr a tisztább munkakörnyezet érdekében RO Dustop microfiltru ofer un mediu de lucru mai curat CZ Dustop-Mikrofiltr pro cistsí pracovní prostedí SK Dustop Mikrofilter pre cistejsie pracovné prostredie SL Dustop mikro filter za cistejse delovno okolje
FINGER SANDING
EN Detail pad reaches into corners and hard-to-reach spots D Detail Pad erreicht Ecken und enge, schwer erreichbare Räume F Le pavé de détail atteint les coins et les espaces restreints I Il pad di dettaglio può arrivare agli angoli e spazi ristretti ES La almohadilla de detalle alcanza esquinas y espacios reducidos PT Almofada de detalhes atinge cantos e espaços apertados NL Detailkussen in de hoek en smalle ruimte
DK Detailpude ind i hjørnet og smalt rum
RU NOR Detaljpute inn i hjørnet og smalt rom
SV Detaljplatta i hörnet och det smala utrymmet PL Podkladka z detalami w rogu i wskiej przestrzeni GR HU Részlet pad a sarokba és keskeny tér
RO Placa de detalii în col i spaiul îngust
CZ Náhradní brusní spicka ve tvaru prstu pro brousení v rozích a úzkých prostorech. SK Brusná spica vo tvaru pstu pre brúsenie v rohoch a v malých priestoroch SL Detaljna blazinica za brusenje v kotih in tezje dostopnih mestih
HOOK & LOOP
EN Hook and loop easy paper change
D Klettpapier für bequemen Papierwechsel
F Changement aisé du papier grâce au système velcro I Carta abrasiva con sistema a velcro
ES Sistema de enganche y cierre para un sencillo cambio del papel PT Troca de lixa fácil sistema encaixa - e gira NL Gemakkelijk papier verwisselen met klitteband systeem DK Nem udskiftning af papir med velcrolukning RU NOR Enkelt papirskifte med "borrelås"
SV Sätt fast och kör, enkelt pappersbyte
PL Tarcza z mocowaniem na rzep, do latwej zmiany papieru GR HU Egyszer tépzáras dörzspapír-csere
RO Sistemul de prindere a mirghelului pe suport permite schimbarea rapid a acesteia CZ Snadná výmna brusného papíru na suchý zip SK Podlozka so suchým zipsom pre jednoduchú výmena brúsneho papiera SL Enostavna menjava papirja z zadrgo
LOW VIBRATION
EN Low vibration increases gripping comfort and reduces fatigue
D Geringe Vibrationen erhöhen den Griffkomfort und verringern die Ermüdung
F Les basses vibrations augmentent le confort de préhension et réduisent la fatigue
I Le basse vibrazioni aumentano il comfort di presa e riducono l'affaticamento
ES Las bajas vibraciones aumentan la comodidad de agarre y reducen la fatiga
PT Baixa vibração aumenta o conforto e reduz a fadiga
NL Lage vibratie voor verbeterd gripcomfort en minder vermoeidheid
DK Lav vibration for forbedret grebkomfort og reduceret træthed
RU
NOR Lav vibrasjon for forbedret grepkomfort og redusert tretthet
SV Låg vibration för förbättrad greppkomfort och minskad trötthet
PL Niski poziom wibracji dla lepszego komfortu chwytu i zmniejszenia zmczenia
GR
HU Alacsony vibráció a jobb kényelem és a csökkent fáradtság érdekében
RO Vibraii sczute pentru un confort de aderen îmbuntit i oboseal redus
CZ Nízké vibrace pro lepsí pohodlí pi uchopu a snízenou únavu
SK Nízke vibrácie pre lepsie drzanie a znízenú únavu
SL Nizka vibracija za boljse udobje pri oprijemu in manjso utrujenost
20V Max Lithium Ion n0: 12000/min
POSITEC Germany GmbH Grüner Weg 10, 50825 Cologne, Germany Made in China/Fabriqué en Chine/Hergestellt in China
WX822.9
: AQ02571800 : 47x14.5mm : PET : +P151C :
20V
WX822 WX822.X
""
a) 1)
2)
3)
4) 5) 6) 7) 8)
b) 1)
d) 1)
2)
2)
2
3)
3)
/
4)
4)
5)
5)
6)
RCD
RCD
c)
6)
1)
2)
7)
8)
3) /
e)
20V
WX822 WX822.X
1)
2)
3)
4)
5)
6) 130
f) 1)
2)
q)
r) (20±5) s) t) u) v)
3
a) b)
c)
d) e) f) g) h) (+)() i) j) k) l) m) n) o) p)
Li-I on
Li-I on
20V
WX822 WX822.X
1
2
3
4
5
4
7
6
9 8
20V
WX822 WX822.X
A
B
8
C
D
5
E
G1
20V
F 1 2
G2
WX822 WX822.X
G1
H1
6
G2 H2
9
20V
WX822 WX822.X
WA3760
0.4A
1. 2. 3. 4.
20V
WA3860
2.0A
WA3880
2.0A
5. 6. 7.
8. *
9. *
*
. A
WX822 WX822.X* 20V ** 12000/
:
. B
140x90
. C
7
2
. D
0.8
* X=1-99A-ZM1-M9 ** 20V18V
WA3550 WA3550.1
1.5Ah 1.5Ah
/
.E
. F
5-10
. G1,G2
. H1,H2
20V
WA3551 WA3551.1 WA3639 WA3553 WA3644
2.0Ah 2.0Ah 2.0Ah 4.0Ah 4.0Ah
2~3
20V
WX822 WX822.X
0-45 0-40
8
20V
WX822 WX822.X
Pb
× × × × ×
Hg
Cd
Cr(VI)
×
PBB
PBDE
GB/T 26572 ×GB/T 26572
9
25 " "" "
1. 2. 3. 4. : 5. 6.
GB/T 3883.204-2019 GB 4343.1-2018
20V
WX822 WX822.X
10
20V
18 215123
AR01477201
WX822 WX822.X
400 887 9955
18215123
www.worx.com
12
· · · · · ·
www.worx.com
400 887 9955
18215123
www.worx.com
_______________/ _______________________________________________
20 20-29
30-39
40-49
50
___________________________________________/______________________________
________________________________ _____________________________________________
___________________________ _____________________________________________
______________________________________________________________________________ ____________________ ______________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________ _________________________________________
_______________/ _______________________________________________
20 20-29
30-39
40-49
50
___________________________________________/______________________________
________________________________ _____________________________________________
___________________________ _____________________________________________
______________________________________________________________________________ ____________________ ______________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________ _________________________________________
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Applicant:
POSITEC TECHNOLOGY(CHINA) CO., LTD No.18 Dongwang Road, Industrial Park, Suzhou, China.
Date:
Mar. 11, 2022
Sample Description:
Item Name
: 20V delta sander
Tested Model
: WX822
***************************************************************************************************************************************************** Tests conducted:
As requested by the applicant, for details refer to attached page(s). Remark:
As requested by the applicant, only the selected components list in this report were tested, and other components not mentioned were not conducted. ***************************************************************************************************************************************************** Conclusion:
Tested sample
Standard
Result
Submitted samples
Restriction of the use of certain hazardous substance in electrical and
Pass
electronic equipment (RoHS Directive 2011/65/EU and (EU) 2015/863)
*****************************************************************************************************************************************************
To be continued
Authorized by: For Intertek testing services Ltd., Shanghai
Jonny Jing Operation Director
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 1 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Tests Conducted
Cadmium (Cd), Lead (Pb), Mercury (Hg), Chromium (Cr) and Bromine (Br) content were measured with reference to IEC 62321-3-1 Edition 1.02013 by XRF spectroscopy and chemical confirmation test for RoHS restricted substances. And Phthalates content were determined by Gas Chromatographic-Mass Spectrometric (GC-MS).
(A) Results:
Part
Tested
No. Components
Refer information
1
Housing
Restricted XRF Substance Result
Screened Results (phthalates)
Chemical Confirmation
Result
Conclusion on RoHS
Cd
P
/
Pb
P
/
Hg
P
NA
/
1-1
Housing(Blac k plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
1-2
Orange plastic
/
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
1-3
Black soft plastic
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 2 of 51
XRF Screening and chemical confirmation test report (A) Results:
Number: 220301014SHA
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Switch
1-4
cover(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
1-5 Black plastic
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
1-6 Black plastic
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 3 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
1-7
Screw(Black metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
2 Switch set
Cd
P
/
Pb
P
/
Hg
P
NA
/
2-1
Sleeve(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
2-2 jacket(Brown
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 4 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Wire
2-3
jacket(Red
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
2-4
jacket(Blue
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
2-5
Button(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 5 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Switch
2-6
case(Black
/
plastic)
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
P
/
2-7 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Contact
2-8 point(Silvery
/
metal)
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 6 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
2-9
PCB(Green nonmetal)
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
2-10
Solder(Silvery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
3 Motor
Cd
P
/
Pb
P
/
Hg
P
/
Cr
P
/
3-1 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 7 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Cr
X
Cr6+=Negative
3-2 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
3-3
Washer(Brown plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
3-4 White plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 8 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Carbon
3-5 brush(Coppery
/
metal)
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
P
/
3-6 Coppery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
P
/
3-7 Golden metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 9 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
3-8
Wire(Coppery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
3-9
Inductor(Black nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
3-10
Capacitor(Bro wn nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 10 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Cr
P
/
3-11 Black metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
3-12
Magnet(Black nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
3-13
Filling(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 11 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Cr
P
/
3-14 Coppery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
X
Cr6+=Negative
3-15 Green metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
4 Electrode base
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
4-1
jacket(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 12 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Wire
4-2
jacket(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
4-3
jacket(Blue
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
4-4
Wire(Silvery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 13 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Electrode
4-5
base(Black
/
plastic)
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
Electrode
4-6
slice(Silvery
/
metal)
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
5 Fan set
Cd
P
/
Pb
P
/
Hg
P
NA
/
5-1
Washer(Green plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 14 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Cr
P
5-2
Fan(Black plastic)
/
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
5-3 Black plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
5-4
Ring(Golden metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 15 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
5-5
Holder(Silvery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
5-6
Ball(Silvery metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Bearing
5-7 case(Silvery
/
metal)
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 16 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
5-8
Washer(Black metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
X
Cr6+=Negative
5-9
Black metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
5-10
Screw(Silvery metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 17 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
6 Base set
Chemical Confirmation
Result
Conclusion on RoHS
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
6-1 Black plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
6-2 Orange plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
6-3
Sponge(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 18 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
6-4
Hook(Black plastic)
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
X
Pb=20220ppm#1
Hg
P
/
Cr
P
/
6-5 Golden metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
6-6 Black plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 19 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Cr
P
/
6-7 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
6-8
Fabric(Black nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
6-9
Washer(Silver y metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 20 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
6-10
Screw(Black metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
6-11 White plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
7 Assist set
Cd
P
/
Pb
P
/
Hg
P
NA
/
7-1
Hook(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 21 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Cr
P
/
7-2 Black plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
7-3
Sponge(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
7-4
Screw(Black metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 22 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
8 Dust bag
Chemical Confirmation
Result
Conclusion on RoHS
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
8-1 Black plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Fabric
Cr
P
8-2
bag(Black
/
Br
P
nonmetal)
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
8-3
O-ring(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 23 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
9 Charger
Chemical Confirmation
Result
Conclusion on RoHS
Cd
P
/
Pb
P
/
Charger
9-1
case(Black
/
plastic)
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-2
Cable(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Plug
9-3
case(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 24 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Wire
9-4
jacket(Blue
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
9-5 jacket(Brown
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
9-6
Wire(Coppery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 25 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Pin
9-7 holder(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
X
Pb=6169ppm#1
Hg
P
/
Pin(Coppery
9-8
metal with
/
silvery plating)
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
9-9
Screw(Black metal)
/
Cr
X
Cr6+=Negative
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 26 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
9-10 Black plastic
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
9-11
Tie(Black plastic)
/
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Light
9-12 guide(Transpa
/
rent plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 27 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
9-13
Label(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-14
LED(White nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-15
Glue(White plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 28 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Cr
P
/
9-16 White plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
9-17
EC(Black nonmetal)
/
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
P
/
9-18 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 29 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
9-19
Capacitor(Gre en nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-20
Capacitor(Blac k nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-21
Capacitor(Blue nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 30 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Capacitor
9-22 case(Yellow
/
plastic)
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
9-23
Film(Silvery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Capacitor
9-24 case(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 31 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Cr
P
/
9-25 Black rubber
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-26
Paper(Yellow nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
Capacitor
9-27 case(Silvery
/
metal)
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 32 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Cr
P
/
9-28 Brown plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
X
Cr6+=Negative
9-29 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-30
Inductor(Black nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 33 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
9-31
Wire(Coppery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
9-32
Sleeve(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
/
9-33 Black plastic
/
Br
P
/
PASS
DEHP
NA
BL
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 34 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
9-34
Tape(Yellow plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Cr
P
9-35
EC(Black nonmetal)
/
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
9-36
PCB(Green nonmetal)
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 35 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
9-37
Solder(Silvery metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
9-38 jacket(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
9-39 jacket(Yellow
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 36 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Wire
9-40 jacket(Green
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
9-41
jacket(Red
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Electrode
9-42 base(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 37 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Cr
P
/
9-43 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
10 Battery pack
Cd
P
/
Pb
P
/
10-1
Case(Black plastic)
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
10-2
Button(Orange plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 38 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
10-3
Screw(Black metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
10-4
Spring(Black metal)
/
Cr
P
Br
NA
NA
DEHP
NA
/
/
PASS
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
10-5
Label(Black plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 39 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
10-6
Sponge(Black plastic)
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
10-7 Black plastic
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
10-8 Black plastic
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 40 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
/
Cr
P
/
10-9 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
/
Cr
P
/
10-10 Silvery metal
/
Br
NA
NA
/
PASS
DEHP
NA
/
BBP
NA
/
DBP
NA
/
DIBP
NA
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
10-11
Paper(Red nonmetal)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 41 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
10-12
Glue(White plastic)
/
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
10-13 jacket(White
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
10-14 jacket(Black
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 42 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
Tested Components
Refer information
Restricted XRF Substance Result
Screened Results (phthalates)
Cd
P
Chemical Confirmation
Result
/
Conclusion on RoHS
Pb
P
/
Hg
P
NA
/
Wire
10-15 jacket(Yellow
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
Hg
P
NA
/
Wire
10-16 jacket(Red
/
plastic)
Cr
P
Br
P
DEHP
NA
BL
/
/
PASS
/
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
Cd
P
/
Pb
P
/
10-17
PCB(Green nonmetal)
/
Hg
P
NA
Cr
P
Br
X
DEHP
NA
BL
/
/ PBB=ND PBDE=ND
/
PASS
BBP
NA
BL
/
DBP
NA
BL
/
DIBP
NA
BL
/
*****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 43 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
(A) Results:
Part No.
10-18
Tested Components
Solder(Silvery metal)
Refer information
/
Restricted XRF Substance Result
Cd
P
Pb
P
Hg
P
Cr
P
Br
NA
DEHP
NA
BBP
NA
DBP
NA
DIBP
NA
Screened Results (phthalates)
NA
Chemical Confirmation
Result / / / / / / / / /
Conclusion on RoHS
PASS
Remark: P = pass (Below the lower screening limit of table (B1)) X = inconclusive result (Further chemical test was suggested (see table (B1).) BL=Below the lower screening limit of table (B2) and pass NA = not applicable ND = not detected ppm = Parts per million = mg/kg Negative=The Cr (VI) concentration is less than 0.10 µg/cm2.The sample is negative for Cr (VI).
(#1) = As claimed by the declaration submitted by the client, the Lead content of the components is coming from copper alloy, the limit for Lead is 40,000ppm.
***************************************************************************************************************************************************** To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 44 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Tests Conducted
(B) (B1) XRF Screening Limits in mg/kg for Regulated Elements in Various Matrices.
Element Cd Pb Hg Cr Br
Polymer materials P 70 < X < 130 F P 700 < X < 1300 F P 700< X < 1300 F P 700< X P 300< X
Metallic materials P 70 < X < 130 F P 700 < X < 1300 F P 700 < X < 1300 F P 700 < F Not applicable
Composite materials P 70 < X < 150 F P 500< X < 1500 F P 500 < X < 1500 F P 500 < X P 250 < X
(B2) Preliminary screening test will used for phthalates, if the results exceed the warning area in the following table, further chemical methods will conduct to confirm the exact content by GC/MS.
Phthalates Bis(2-ethylhexyl)phthalate(DEHP)
Butyl benzyl phthalate(BBP) Dibutyl phthalate(DBP)
Diisobutyl phthalate(DIBP)
Polymer BL 600<X BL 600<X BL 600<X BL 600<X
(C) Estimated detection limits in mg/kg for regulated elements in various matrices.
Element Cd Pb Hg Cr Br
Polymer materials 50 100 100 100 200
Metallic materials 70 200 200 200
Not applicable
Composite materials 70 200 200 200 200
************************************************************************************************************************************************************ Disclaimers:
This XRF screening report is for reference purposes only. The applicant shall make its/his/her own judgment as to whether the information provided in this XRF screening report is sufficient for its/his/her purposes.
The results shown in this XRF screening report will differ based on various factors, including but not limited to, the sample size, thickness, area, surface flatness, equipment parameters and matrix effect (e.g. plastic, rubber, metal, glass, ceramic etc.). Further wet chemical pre-treatment with relevant chemical equipment analysis is required to obtain quantitative data. *****************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 45 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Tests Conducted (D) Chemical confirmation test methods
Testing Item
Testing Method
Reporting Limit
Cadmium (Cd) Content Lead (Pb) Content Mercury (Hg) Content
With reference to IEC 62321-5 Edition 1.0:2013, by acid digestion until the tested sample was totally dissolved and determined by ICP - OES With reference to IEC 62321-5 Edition 1.0:2013, by acid digestion until the tested sample was totally dissolved and determined by ICP - OES With reference to IEC 62321-4 Edition 1.1:2017, by acid digestion until the tested sample was totally dissolved and determined by ICP - OES
2 mg/kg 2 mg/kg 2 mg/kg
Chromium (VI)(Cr6+) Content
With reference to IEC 623217-2 Edition 1.0:2017, by alkaline digestion and determined by UV-VIS Spectrophotometer
10 mg/kg
Positive(>0.13 g/cm2) /
Chromium (VI) (Cr6+)
With reference to IEC 62321-7-1 Edition 1.0:2015, by boiling
Negative(<0.10 g/cm2) /
Content
water extraction and determined by UV-VIS Spectrophotometer. Inconclusive(0.10g/cm2 -
-0.13 g/cm2)
Polybrominated Biphenyls (PBBs)& Polybrominated Diphenyl Ethers (PBDEs) Content
With reference to IEC 62321-6 extraction and determined by confirmation when necessary
Edition 1.0:2015, by solvent GC/MS and further HPLC
5 mg/kg
Phthalates (DEHP, BBP, With reference to IEC 62321-8 Edition 1.0:111/321/CD, by
DBP, DIBP) Content
solvent extraction and determined by GC/MS
100mg/kg
(E) RoHS requirement
Restricted Substances Cadmium (Cd) Lead (Pb) Mercury (Hg) Chromium (VI) (Cr6+) Polybrominated Biphenyls (PBBs) Polybrominated Diphenyl Ethers (PBDEs) Phthalates (DEHP, BBP, DBP, DIBP)
Limits 0.01% (100 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg)
The above limits were quoted from 2011/65/EU and (EU) 2015/863 for homogeneous material.
Date sample received: Mar. 08, 2022 Testing period: Mar. 08, 2022 To Mar. 11, 2022 ************************************************************************************************************************************************************
To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 46 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Tests Conducted
Photo of test components
220301014SHA
1
2
3
4
220301014SHA
5 6
8 7
220301014SHA
9
220301014SHA
10
220301014SHA
1-1 1-2
1-3
1-4
1-4
1-5 1-6
220301014SHA
2-2 2-3 2-1
2-4 2-5
2-6 2-7 2-8
2-9 2-10
************************************************************************************************************************************************************ To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 47 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
220301014SHA
Photo of test components
220301014SHA
3-1 3-2 3-3 3-4
3-5
3-6 3-7 3-8 3-9 3-10
3-11 3-12
3-14
3-13
3-15
220301014SHA
4-1
4-2
4-3 4-4 4-5 4-6
220301014SHA
5-2 5-1
5-3 5-4 5-5
5-6
5-7
5-8 5-9 5-10
220301014SHA
7-1
7-2
7-3
7-4
220301014SHA
8-1 8-2 8-3
8-4
8-5
8-6
8-7
************************************************************************************************************************************************************ To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 48 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Photo of test components
220301014SHA
9-1 9-2 9-3
220301014SHA
9-9 9-10
9-11 9-12 9-13
9-4 9-5 9-6 9-7 9-8
9-14 9-15 9-16 9-17
9-18
220301014SHA
9-19 9-20 9-21 9-22 9-23
9-24 9-25 9-26
9-27 9-28
220301014SHA
9-29 9-30 9-31 9-32 9-33
9-34 9-35
9-36 9-37
220301014SHA
9-38 9-39 9-40 9-41
9-42 9-43
220301014SHA
10-1 10-2
10-4 10-5
10-3
10-6
10-7 10-8 10-9
************************************************************************************************************************************************************ To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 49 of 51
XRF Screening and chemical confirmation test report Photo of test components
220301014SHA
10-10 10-11 10-1210-13
Number: 220301014SHA
10-14 10-15 10-16 10-14 10-18
************************************************************************************************************************************************************ To be continued
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 50 of 51
XRF Screening and chemical confirmation test report
Number: 220301014SHA
Tests Conducted
Photo of whole tested product(s)
220301014SHA
220301014SHA
220301014SHA
220301014SHA
Remark
The tested samples were confirmed by client and reference models were based on the self-declaration supplied by clients.
Intertek takes no responsibility for any issues of product consistency caused by inaccurate and/or invalid information submitted by
the client. ************************************************************************************************************************************************************
End of report
This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct.
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233 801B
200233
Tel: +86 21 6127 8200 Fax: +86 21 6495 6263 www.intertek.com www.intertek.com.cn
Page 51 of 51
Test Verification of Conformity
Verification Number: 191000961SHA-V1
On the basis of the referenced test report(s), sample(s) tested of the below product have been found to comply with the standards harmonized with the directives listed on this verification at the time the tests were carried out. Other standards and Directives may be relevant to the product. This verification is part of the full test report(s) and should be read in conjunction with it <them>.
Once compliance with all product relevant
mark directives are verified, including any relevant e.g. risk
assessment and production control, the manufacturer may indicate compliance by signing a Declaration of
Conformity themselves and applying the mark to products identical to the tested sample(s).
Applicant Name & Address:
Manufacturing site Name&Address: Product Description: Ratings & Principle Characteristics: Models/Type References:
Brand Name(s): Standard(s)/Directive(s):
Verification Issuing Office Name & Address: Date of Tests Test Report Number(s):
Positec Technology (China) Co., Ltd. 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P.R.China CHANGZHOU STADARD ELECTRIC APPLIANCE CO., LTD NO.29 The Chunqiu Road Minghuang Industrial Wujin Changzhou, P.R. China. Battery-powered Delta Sander 20Vd.c., n0:12000/min
WX822, WX822.* (* = A to Z or 0-9 which means different package and/or accessories) WORX EN 55014-1:2017 EN 55014-2:2015 the EMC directive(2014/30/EU) Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China November 20, 2019 191000961SHA-001
Signature
Name: Jonny Jing Position: Operation Director Date: November 27, 2019
This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Verification are relevant only to the sample tested/inspected. This Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
Intertek
Page 1 of 1
GFT-OP-11b (22-February-2018)
Positec Technology (China) Co., Ltd.
TEST REPORT
SCOPE OF WORK: EMC directive (2014/30/EU) EMC report
Model: WX822, WX822.* (* = A to Z or 0-9 which means different package and/or accessories)
REPORT NUMBER 191000961SHA-001
ISSUE DATE November 27, 2019
DOCUMENT CONTROL NUMBER
TTRF55014-01_V1 © 2018 Intertek
Intertek Testing Services Shanghai, Building No.86, 1198 Qinzhou Road (North),
Caohejing Development Zone, Shanghai 200233, China
Telephone: 86 21 6127 8200 www.intertek.com
Report no. 191000961SHA-001
Applicant
: Positec Technology (China) Co., Ltd. 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P.R.China
Manufacturer
: Positec Technology (China) Co., Ltd. 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P.R.China
Manufacturing site
: CHANGZHOU STADARD ELECTRIC APPLIANCE CO., LTD NO.29 The Chunqiu Road Minghuang Industrial Wujin Changzhou, P.R.China
Summary
The equipment complies with the requirements according to the following standard(s) or Specification:
EN 55014-1:2017: Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission
EN 55014-2:2015: Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Product family standard
PREPARED BY:
REVIEWED BY:
Hao Liang Project Engineer
Star Guo Reviewer
This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
TTRF55014-01_V1 © 2018 Intertek
Page 2 of 52
Report No. 191000961SHA-001
Contents
REVISION HISTORY................................................................................................................................................ 5
MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6
1. GENERAL INFORMATION ............................................................................................................................. 7
1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 8
2. TEST SPECIFICATIONS................................................................................................................................... 9
2.1 NORMATIVE STANDARDS.......................................................................................................................................9 2.2 MODE OF OPERATION DURING THE TEST.................................................................................................................10 2.3 TEST PERIPHERALS USED ..................................................................................................................................... 10 2.4 RECORD OF CLIMATIC CONDITIONS ........................................................................................................................ 10 2.5 INSTRUMENT LIST .............................................................................................................................................. 11 2.6 MEASUREMENT UNCERTAINTY.............................................................................................................................12
EMISSION TEST ................................................................................................................................................... 13
3. MAINS/LOAD/CONTROL TERMINAL CONTINUOUS DISTURBANCE VOLTAGE.............................................. 13
3.1 TERMINAL VOLTAGE LIMITS FOR THE FREQUENCY RANGE 9KHZ TO 30MHZ .................................................................. 13 3.1.1 General limits......................................................................................................................................13 3.1.2 Limits for mains port of tools .............................................................................................................. 13
3.2 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 14 3.3 TEST SETUP AND TEST PROCEDURE ....................................................................................................................... 15 3.4 TEST PROTOCOL ................................................................................................................................................ 16
4. MAINS TERMINAL DISCONTINUOUS DISTURBANCE VOLTAGE/CLICK ......................................................... 18
4.1 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 18 4.2 TEST SETUP AND TEST PROCEDURE ....................................................................................................................... 18 4.3 TEST PROTOCOL ................................................................................................................................................ 19
5. CONTINUOUS DISTURBANCE POWER ........................................................................................................ 20
5.1 CONTINUOUS DISTURBANCE POWER LIMIT..............................................................................................................20 5.2 BLOCK DIAGRAM OF TEST SET UP .......................................................................................................................... 20 5.3 TEST PROCEDURE .............................................................................................................................................. 20 5.4 TEST PROTOCOL ................................................................................................................................................ 21
6. RADIATED EMISSION ................................................................................................................................. 23
6.1 LIMIT .............................................................................................................................................................. 23 6.2 BLOCK DIAGRAM AND TEST SET UP ........................................................................................................................ 23 6.3 TEST PROTOCOL ................................................................................................................................................ 24
7. HARMONICS .............................................................................................................................................. 26
7.1 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 26 7.2 TEST SETUP AND TEST PROCEDURE ....................................................................................................................... 26 7.3 TEST PROTOCOL ................................................................................................................................................ 27
8. VOLTAGE FLUCTUATIONS-FLICKER.............................................................................................................. 28
8.1 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 28 8.2 TEST SETUP AND TEST PROCEDURE ....................................................................................................................... 28
8.2.1 Definition ............................................................................................................................................ 28 8.2.2 Test condition ...................................................................................................................................... 28 8.3 TEST PROTOCOL ................................................................................................................................................ 29
IMMUNITY TEST ................................................................................................................................................. 30
TTRF55014-01_V1 © 2018 Intertek
Page 3 of 52
Report No. 191000961SHA-001
9. ELECTROSTATIC DISCHARGE (ESD).............................................................................................................. 31
9.1 SEVERITY LEVEL AND PERFORMANCE CRITERION......................................................................................................31 9.1.1 Test level ............................................................................................................................................. 31 9.1.2 Performance Criterion.........................................................................................................................31
9.2 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 32 9.3 TEST SETUP AND TEST PROCEDURE ....................................................................................................................... 33 9.4 TEST PROTOCOL ................................................................................................................................................ 34
10. ELECTROMAGNETIC FIELD SUSCEPTIBILITY ................................................................................................ 35
10.1 SEVERITY LEVEL AND PERFORMANCE CRITERION ................................................................................................. 35 10.1.1 Test level ............................................................................................................................................. 35 10.1.2 Performance Criterion.........................................................................................................................35
10.2 BLOCK DIAGRAM OF TEST SETUP ...................................................................................................................... 36 10.3 TEST SETUP AND TEST PROCEDURE .................................................................................................................. 36 10.4 TEST PROTOCOL ........................................................................................................................................... 36
11. ELECTRIC FAST TRANSIENT/BURST IMMUNITY TEST .................................................................................. 37
11.1 SEVERITY LEVEL AND PERFORMANCE CRITERION ................................................................................................. 37 11.1.1 Test level ............................................................................................................................................. 37 11.1.2 Performance Criterion.........................................................................................................................37
11.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 38 11.2.1 Block Diagram for input a.c./d.c. power line ...................................................................................... 38 11.2.2 Block Diagram for output a.c./d.c. power line or signal/control lines ................................................ 39
11.3 TEST SETUP AND TEST PROCEDURE .................................................................................................................. 39 11.4 TEST PROTOCOL ........................................................................................................................................... 40
12. SURGE IMMUNITY TEST ............................................................................................................................. 41
12.1 SEVERITY LEVEL AND PERFORMANCE CRITERION ................................................................................................. 41 12.1.1 Test level ............................................................................................................................................. 41 12.1.2 Performance Criterion.........................................................................................................................41
12.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 42 12.3 TEST SETUP AND TEST PROCEDURE .................................................................................................................. 42 12.4 TEST PROTOCOL ........................................................................................................................................... 42
13. IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS ............................. 43
13.1 SEVERITY LEVEL AND PERFORMANCE CRITERION ................................................................................................. 43 13.1.1 Test level ............................................................................................................................................. 43 13.1.2 Performance Criterion.........................................................................................................................43
13.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 43 13.3 TEST SETUP AND TEST PROCEDURE .................................................................................................................. 44 13.4 TEST PROTOCOL ........................................................................................................................................... 45
14. VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST ............................... 46
14.1 SEVERITY LEVEL AND PERFORMANCE CRITERION ................................................................................................. 46 14.1.1 Test level ............................................................................................................................................. 46 14.1.2 Performance Criterion.........................................................................................................................46
14.2 BLOCK DIAGRAM OF TEST SETUP ...................................................................................................................... 47 14.3 TEST SETUP AND TEST PROCEDURE .................................................................................................................. 47 14.4 TEST PROTOCOL ........................................................................................................................................... 47
APPENDIX I: PHOTOGRAPH OF EQUIPMENT UNDER TEST................................................................................... 48
TTRF55014-01_V1 © 2018 Intertek
Page 4 of 52
Report No.
Version
191000961SHA-001 Rev. 01
Revision History
Description Initial issue of report
Report No. 191000961SHA-001
Issued Date November 27, 2019
TTRF55014-01_V1 © 2018 Intertek
Page 5 of 52
Report No. 191000961SHA-001
Measurement result summary
TEST ITEM
Mains terminal continuous disturbance voltage Mains terminal discontinuous disturbance voltage/click Continuous disturbance power Radiated Emission Harmonics Voltage fluctuation-Flicker Electrostatic Discharge (ESD) RF electromagnetic field susceptibility Electric Fast Transient /Burst (EFT/B) Surge Injected Current Voltage dips and interruption
TEST RESULT NA NA NA Pass NA NA Pass Pass NA NA NA NA
NOTE
Notes: 1. NA =Not Applicable 2. Determination of the test conclusion is based on IEC Guide 115 in consideration of measurement uncertainty. 3. Additions, Deviations and Exclusions from Standards: None.
TTRF55014-01_V1 © 2018 Intertek
Page 6 of 52
Report No. 191000961SHA-001
1. GENERAL INFORMATION
1.1 Description of Equipment Under Test (EUT)
Product name : Battery-powered Delta Sander
Type/Model : WX822, WX822.* (* = A to Z or 0-9 which means different package and/or accessories)
Description of EUT : The products covered in this report are hand-held motor-operated battery-powered sanders. All models are identical with each other except for the trade mark, package and/or accessories. One model was tested and the worst data is listed as representative.
Rating : 20Vd.c., n0:12000/min
Brand name : WORX
Mains lead : (un)shielded, (non)detachable
Data cable : None.
EUT type :
Table-top Floor standing
EUT is toy, defined
Category A
as
Category B
Category C
Category D
Category E
Sample received date : November 18, 2019
Sample Identification : 0191118-59-001 No.
Date of test : November 20, 2019
TTRF55014-01_V1 © 2018 Intertek
Page 7 of 52
Report No. 191000961SHA-001
1.2 Description of Test Facility Name : Intertek Testing Services Shanghai
Address : Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China
Telephone : 86 21 61278200 Telefax : 86 21 54262353
The test facility is : CNAS Accreditation Lab
recognized, certified, or Registration No. CNAS L0139
accredited by these organizations
FCC Accredited Lab Designation Number: CN1175
IC Registration Lab CAB identifier.: CN0051
VCCI Registration Lab Registration No.: R-14243, G-10845, C-14723, T-12252
A2LA Accreditation Lab Certificate Number: 3309.02
TTRF55014-01_V1 © 2018 Intertek
Page 8 of 52
Report No. 191000961SHA-001
2. TEST SPECIFICATIONS
2.1 Normative Standards
IEC 61000-4-2:2008: Electromagnetic Compatibility (EMC) Part 4-2: testing and measurement techniques electrostatic discharge immunity test IEC 61000-4-3:2006+A1:2007+A1:2010: Electromagnetic Compatibility (EMC) Part 4-3: testing and measurement techniques radiated, radio frequency, electromagnetic field immunity test IEC 61000-4-4:2012: Electromagnetic Compatibility (EMC) Part 4-4: testing and measurement techniques electric fast transient/burst immunity test IEC 61000-4-5:2014: Electromagnetic Compatibility (EMC) Part 4-5: testing and measurement techniques section 5: surge immunity test IEC 61000-4-6:2013: Electromagnetic Compatibility (EMC) Part 4-6: testing and measurement techniques section 6: immunity to conducted disturbance, induced by radio frequency field
IEC 61000-4-11:2004: Electromagnetic Compatibility (EMC) Part 4-11: testing and measurement techniques voltage dips, short interruption and voltage variations immunity test
IEC 61000-4-22:2010, Electromagnetic compatibility (EMC) Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs)
Note: there are no magnetic sensitive components included in this EUT and magnetic field immunity test according to EN 61000-4-8 is therefore not required.
TTRF55014-01_V1 © 2018 Intertek
Page 9 of 52
Report No. 191000961SHA-001
2.2 Mode of operation during the test
Within this test report, EUT was tested under all available operation modes and tested under its rating voltage and frequency. Other voltage and frequency is specified if used.
2.3 Test Peripherals used
Item No 1
Description -
Band and Model -
S/No -
2.4 Record of climatic conditions
Test Item
Mains terminal continuous disturbance voltage
Mains terminal discontinuous disturbance voltage/click
Continuous disturbance power Radiated Emission Harmonics
Voltage fluctuation-Flicker Electrostatic Discharge (ESD)
RF electromagnetic field susceptibility
Electric Fast Transient /Burst (EFT/B) Surge
Injected Current Voltage dips and interruption
Temperature (°C) NA
NA
NA 24 NA NA 24
24
NA NA NA NA
Notes: NA =Not Applicable
Relative Humidity (%) NA
NA
NA 42 NA NA 42
42
NA NA NA NA
Pressure (Kpa) NA
NA
NA NA NA NA 101
NA
NA NA NA NA
TTRF55014-01_V1 © 2018 Intertek
Page 10 of 52
2.5 Instrument list
Radiated Emission
Used
Equipment
Test Receiver
Bilog Antenna
ESD
Used
Equipment
ESD generator
Radiated Immunity
Used
Equipment
Signal generator Power amplifier Log-period antenna
Field meter
Power sensor
Tet Site
Used
Equipment
Shielded room
Semi-anechoic chamber
Fully-anechoic chamber
Additional instrument
Used
Equipment
TheromHygrograph
TheromHygrograph
TheromHygrograph
Manufacturer R&S TESEQ
Manufacturer TESEQ
Manufacturer R&S AR AR AR
Keysight
Manufacturer Zhongyu Albatross project Albatross project
Manufacturer ZJ1-2A ZJ1-2A ZJ1-2A
Type ESIB 26 CBL 6112D
Type NSG 437
Type SMR 20 250W1000B AT 1080 FL17000 N1914A
Type -
Type S.M.I.F. S.M.I.F. S.M.I.F.
Report No. 191000961SHA-001
Internal no. EC 3045 EC 4206
Due date 2020-09-11 2019-12-10
Internal no. EC 4792-4
Due date 2020-03-27
Internal no. EC 3044-1 EC 5818-2 EC 3044-7 EC 5818-1 EC 5818-3
Due date 2020-01-13 2020-04-14 2020-03-04 2020-06-09 2020-04-14
Internal no. EC 2839 EC 3048
EC 3047
Due date 2020-01-13 2020-07-30
2020-07-30
Internal no. EC 2323 EC 5198 EC 3326
Due date 2019-12-23 2020-02-27 2020-04-07
TTRF55014-01_V1 © 2018 Intertek
Page 11 of 52
2.6 Measurement Uncertainty
Measurement
Conducted emission at mains ports
Continuous disturbance voltage at telecom ports
Continuous disturbance current at telecom ports
Mains terminal discontinuous disturbance voltage/click
Continuous disturbance power Radiated Emissions up to 1 GHz
Radiated Emissions above 1 GHz
Harmonic current emission Voltage fluctuations and flicker
ESD Radiated susceptibility EFT test at main terminal EFT test at signal/telecom terminal Surge test at main terminal Injected current test at main terminal Injected current test at unshielded signal
terminal Voltage dips and interruption
Report No. 191000961SHA-001
Frequency
9kHz ~ 150kHz 150kHz ~ 30MHz
150kHz ~ 30MHz
150kHz ~ 30MHz
-
30MHz ~ 300MHz 30MHz ~ 1GHz 1GHz ~ 6GHz 6GHz ~ 18GHz -
-
-
Expanded Uncertainty (k=2) (±) 3.52 dB 3.19 dB
3.64 dB
2.62 dB
3.76 dB
4.35 dB 4.90 dB 5.02 dB 5.28 dB 3.90% 10.34% 6.65% 2.38% 11.57% 11.62% 11.57% 1.88 dB
3.41 dB
6.05%
TTRF55014-01_V1 © 2018 Intertek
Page 12 of 52
Report No. 191000961SHA-001
Emission Test
3. Mains/Load/Control Terminal Continuous Disturbance Voltage
Test result:
NA
3.1 Terminal Voltage Limits for the frequency range 9kHz to 30MHz 3.1.1 General limits
Mains ports
Associated ports
Frequency range Disturbance voltage (MHz) Limits dB(V)
Disturbance voltage Limits dB(V)
Disturbance current Limits dB(V)
Quasi-peak Average Quasi-peak Average Quasi-peak Average
0.15 ~ 0.5 66 ~ 56 * 66 ~ 56 *
80
70
40 ~ 30 * 30 ~ 20 *
0.5 ~ 5.0 5.0 ~ 30
56
56
60
60
74 74
64 64
30
20
Notes:
1. * means the limit decreasing linearly with the logarithm of the frequency in the
range 0.15MHz to 0.5MHz.
2. If the quasi-peak measurements meet the average limit, the EUT shall be deemed to
meet both limits and the measurements using the average detector need not be carried
out.
3.1.2 Limits for mains port of tools
P 700 W
700 W < P 1 000 W
P > 1 000 W
Frequency range
Limits dB(V)
Limits dB(V)
Limits dB(V)
(MHz)
Quasi-peak Average Quasi-peak Average Quasi-peak Average
0.15-0.35
66-59* 59-49* 70-63* 63-53* 76-69* 69 ~ 59 *
0.35-5
59
49
63
53
69
59
5-30
64
54
68
58
74
64
Notes:
1. * means the limit decreasing linearly with the logarithm of the frequency in the
range 0.15MHz to 0.35MHz.
2. If the quasi-peak measurements meet the average limit, the EUT shall be deemed to
meet both limits and the measurements using the average detector need not be carried
out.
TTRF55014-01_V1 © 2018 Intertek
Page 13 of 52
3.2 Block Diagram of Test Setup At mains terminal
Wooden support
Report No. 191000961SHA-001
EUT Accessories
Supply voltage
A.M.N. 50 terminated
A.M.N.
For table top equipment, wooden support is 0.8m height table For floor standing equipment, wooden support is 0.1m height rack. At Associated ports
EMI receiver
Note:
: power line : signal line
: means the test setup while available
TTRF55014-01_V1 © 2018 Intertek
Page 14 of 52
Report No. 191000961SHA-001
3.3 Test Setup and Test Procedure
Measurement was performed in shielded room, and instruments used were according to clause 5.1 of EN 55014-1 if applicable. Detailed test procedure and arrangement was according to clause 5.2 of EN 55014-1. Measurement methods was according to clause 5.4 of EN 55014-1. Operation conditions of EUT was according to clause 6 of EN 55014-1. Frequency range 150kHz 30MHz was checked and EMI receiver measurement bandwidth was set to 9kHz.
TTRF55014-01_V1 © 2018 Intertek
Page 15 of 52
Report No. 191000961SHA-001
3.4 Test Protocol
For Mains ports: Pass
L-Line
Frequency (MHz)
Quasi-peak
Corrected Reading (dBuV)
Limit (dBuV)
Margin (dB)
Corrected Reading (dBuV)
Average
Limit (dBuV)
Margin (dB)
Note: * means the emission level 20dB below the relevant limit.
N-Line
Frequency (MHz)
Quasi-peak
Corrected Reading (dBuV)
Limit (dBuV)
Margin (dB)
Corrected Reading (dBuV)
Average
Limit (dBuV)
Margin (dB)
Note: * means the emission level 20dB below the relevant limit.
Remark: 1. Correct Factor = LISN Factor + Cable Loss, the value was added to Original Receiver Reading by the software automatically.
2. Corrected Reading = Original Receiver Reading + Correct Factor 3. Margin = Limit - Corrected Reading 4. If the PK Corrected Reading is lower than AV limit, the AV test can be elided.
Example: Assuming LISN Factor = 10.00dB, Cable Loss = 2.00dB, Original Receiver Reading = 10.00dBuV, Limit = 66.00dBuV.
TTRF55014-01_V1 © 2018 Intertek
Page 16 of 52
Then Correct Factor = 10.00 + 2.00 = 12.00dB; Corrected Reading = 10dBuV + 12.00dB = 22.00dBuV; Margin = 66.00dBuV 22.00dBuV = 44.00dB.
For Associated ports: NA
Report No. 191000961SHA-001
Frequency (MHz)
Quasi-peak
Corrected Reading (dBuV)
Limit (dBuV)
Margin (dB)
Corrected Reading (dBuV)
Average
Limit (dBuV)
Margin (dB)
Note: * means the emission level 20dB below the relevant limit.
Remark: 1. Correct Factor = LISN Factor + Cable Loss, the value was added to Original Receiver Reading by the software automatically.
2. Corrected Reading = Original Receiver Reading + Correct Factor 3. Margin = Limit - Corrected Reading 4. If the PK Corrected Reading is lower than AV limit, the AV test can be elided.
Example: Assuming LISN Factor = 10.00dB, Cable Loss = 2.00dB, Original Receiver Reading = 10.00dBuV, Limit = 66.00dBuV. Then Correct Factor = 10.00 + 2.00 = 12.00dB; Corrected Reading = 10dBuV + 12.00dB = 22.00dBuV; Margin = 66.00dBuV 22.00dBuV = 44.00dB.
TTRF55014-01_V1 © 2018 Intertek
Page 17 of 52
Report No. 191000961SHA-001
4. Mains terminal discontinuous disturbance voltage/click
Test result:
NA
4.1 Block Diagram of Test Setup
EMI receiver with Time domain/Click meter
AMN
EUT
4.2 Test Setup and Test Procedure
Measurement was performed in shielded room, and instruments used were according to clause 5.1 of EN 55014-1 if applicable. Detailed test procedure and arrangement was according to clause 5.2 of EN 55014-1. Measurement methods was according to clause 5.4 of EN 55014-1. Operation conditions of EUT was according to clause 6 of EN 55014-1. 0.15MHz, 0.5MHz, 1.4MHz and 30MHz were spot checked, and upper quartile methods used during measurement. The final judgment of test result was according to figure 6 of EN 55014-1.
TTRF55014-01_V1 © 2018 Intertek
Page 18 of 52
Report No. 191000961SHA-001
4.3 Test Protocol
Frequency
(MHz)
0.15
0.5
1.4
30.0
Permitted limit
for continuous interference
66.0
56.0
56.0
60.0
(dBµV)
Counted click/switch operation number
Observed time (min)
Click duration (ms)
Click rate N
Factor
Permitted limits for clicks (dBµv)
Counted clicks exceeding the limits
Test result Any other descriptions:
TTRF55014-01_V1 © 2018 Intertek
Page 19 of 52
Report No. 191000961SHA-001
5. Continuous disturbance power
Test result:
NA
5.1 Continuous disturbance power limit
General
P 700 W
700 W < P 1 000 W
P > 1 000 W
Frequency range
Limits dB(pW)
Limits dB(pW)
Limits dB(pW)
Limits dB(pW)
(MHz)
Quasi-peak Average Quasi-peak Average Quasi-peak Average Quasi-peak Average
30-300
45-55* 35-45* 45-55* 35-45* 49-59* 39-49* 55-65* 45 55*
Notes:
1. * means the limit decreasing linearly with the logarithm of the frequency in the range 30MHz to 300MHz.
2. If the quasi-peak measurements meet the average limit, the EUT shall be deemed to meet both limits and
the measurements using the average detector need not be carried out.
5.2 Block diagram of test set up
Absorbing clamp
Absorber (ferrite rings)
6 dB attenuator
EMI test receiver
EUT
Current transforme r
Absorber (ferrite rings)
Transformer
Absorbing clamp moved over power cord to obtain max. reading on receiver
Mains
The transformer to provide a stable voltage to the EUT during the test
5.3 Test Procedure
Measurement was performed in shielded room, and instruments used were according to clause 5.1 of EN 55014-1 if applicable. Detailed test procedure and arrangement was according to clause 5.3 of EN 55014-1. Measurement methods was according to clause 5.4 of EN 55014-1. Operation conditions of EUT was according to clause 6 of EN 55014-1. Frequency range 30MHz 300MHz was checked and EMI receiver measurement bandwidth was set to 120kHz.
TTRF55014-01_V1 © 2018 Intertek
Page 20 of 52
5.4 Test Protocol For Mains ports: Pass
Report No. 191000961SHA-001
Frequency (MHz)
Quasi-peak
Corrected Reading (dBpW)
Limit (dBpW)
Margin (dB)
Corrected Reading (dBpW)
Average
Limit (dBpW)
Margin (dB)
Note: * means the emission level 20dB below the relevant limit.
Remark: 1. Correct Factor = Clamp Factor + Cable Loss, the value was added to Original Receiver Reading by the software automatically.
2. Corrected Reading = Original Receiver Reading + Correct Factor 3. Margin = Limit - Corrected Reading 4. If the PK Corrected Reading is lower than AV limit, the AV test can be elided.
Example: Assuming Clamp Factor = 10.00dB, Cable Loss = 2.00dB, Original Receiver Reading = 10.00dBpW, Limit = 66.00dBpW. Then Correct Factor = 10.00 + 2.00 = 12.00dB; Corrected Reading = 10dBpW + 12.00dB = 22.00dBpW; Margin = 66.00dBpW 22.00dBpW = 44.00dB.
TTRF55014-01_V1 © 2018 Intertek
Page 21 of 52
For Associated ports: NA
Report No. 191000961SHA-001
Frequency (MHz)
Quasi-peak
Corrected Reading (dBpW)
Limit (dBpW)
Margin (dB)
Corrected Reading (dBpW)
Average
Limit (dBpW)
Margin (dB)
Note: * means the emission level 20dB below the relevant limit.
Remark: 1. Correct Factor = Clamp Factor + Cable Loss, the value was added to Original Receiver Reading by the software automatically.
2. Corrected Reading = Original Receiver Reading + Correct Factor 3. Margin = Limit - Corrected Reading 4. If the PK Corrected Reading is lower than AV limit, the AV test can be elided.
Example: Assuming Clamp Factor = 10.00dB, Cable Loss = 2.00dB, Original Receiver Reading = 10.00dBpW, Limit = 66.00dBpW. Then Correct Factor = 10.00 + 2.00 = 12.00dB; Corrected Reading = 10dBpW + 12.00dB = 22.00dBpW; Margin = 66.00dBpW 22.00dBpW = 44.00dB.
TTRF55014-01_V1 © 2018 Intertek
Page 22 of 52
Report No. 191000961SHA-001
6. Radiated emission
Test result:
PASS
As for in the disturbance power test all emission readings from the EUT are lower than the
applicable limits (Table 7) reduced by the margin (Table 8) and the maximum clock frequency is less
than 30MHz, the EUT is deemed to comply with the Radiated Emission requirement without test.
6.1 Limit
Radiated emission limit from frequency range 30MHz 1000MHz
Frequency (MHz)
Permitted limit in dBV/m
Permitted limit in dBV/m
(Quasi-peak)
(Quasi-peak)
of Measurement Distance
of Measurement Distance
3m
10m
30 ~ 230
40
30
230 ~ 300
47
37
Notes:
1. For the measurement distance other than 3m and 10m, the limit is varied according to
20dB/10 decades.
2. The gray rows are selected items.
6.2 Block diagram and test set up
Antenna mast
EUT Turn Table
Test receiver AE
The measurement was applied in a semi-anechoic chamber. Operation conditions of EUT was according to clause 6 of EN 55014-1. Measurement was performed according to clause 10 of CISPR 32. Setting of EUT is according to clause 5.3.4.3 of EN 55014-1. The bandwidth setting on test receiver was 120kHz. The frequency range from 30MHz to 300MHz was checked.
TTRF55014-01_V1 © 2018 Intertek
Page 23 of 52
6.3 Test Protocol
Horizontal
Report No. 191000961SHA-001
Vertical
TTRF55014-01_V1 © 2018 Intertek
Page 24 of 52
Report No. 191000961SHA-001
Polarization
Frequency
Emission level
(MHz)
(dBV/m)
224.39
34.60
Horizontal
663.71 784.23
41.90 42.38
908.64
41.50
168.02
31.90
Vertical
224.39 675.37
36.51 37.60
965.01
35.20
*means the margin larger than 10 dBV/m.
Limits (dBV/m)
40.0 47.0 47.0 47.0 40.0 40.0 47.0 47.0
Margin (dBV/m)
5.40 5.10 4.62 5.50 8.10 3.49 9.40 11.80
Remark: 1. Correct Factor = Antenna Factor + Cable Loss (+ Amplifier, for higher than 1GHz), the value was added to Original Receiver Reading by the software automatically.
2. Corrected Reading = Original Receiver Reading + Correct Factor 3. Margin = Limit - Corrected Reading 4. If the PK Corrected Reading is lower than AV limit, the AV test can be elided.
Example: Assuming Antenna Factor = 30.20dB/m, Cable Loss = 2.00dB, Gain of Preamplifier = 32.00dB, Original Receiver Reading = 10.00dBuV, Limit = 40.00dBuV/m. Then Correct Factor = 30.20 + 2.00 32.00 = 0.20dB/m; Corrected Reading = 10dBuV + 0.20dB/m = 10.20dBuV/m; Margin = 40.00dBuV/m - 10.20dBuV/m = 29.80dB.
TTRF55014-01_V1 © 2018 Intertek
Page 25 of 52
Report No. 191000961SHA-001
7. Harmonics
Test result:
NA
7.1 Block Diagram of Test Setup
Harmonic & flicker test system
EUT
AE
7.2 Test Setup and Test Procedure
Harmonics of the fundamental current were measured up to 40 order harmonics using a digital power meter with an analogue output and frequency analyser which was integrated in the harmonic & flicker test system. The measurements were carried out under steady conditions.
Measuring instrumentation according to IEC 61000-4-7:2002+A1:2008
This product is not defined as lighting equipment, and has rated power less than 75W, therefore, no limit apply according to EN 61000-3-2
The EUT is kitchen machines as listed in the scope of IEC 60335-2-14, therefore, is deemed to conform to the harmonic current limits of this standard without further testing.
TTRF55014-01_V1 © 2018 Intertek
Page 26 of 52
7.3 Test Protocol
Report No. 191000961SHA-001
TTRF55014-01_V1 © 2018 Intertek
Page 27 of 52
8. Voltage Fluctuations-Flicker
Test result:
NA
8.1 Block Diagram of Test Setup
Harmonic & flicker test
system
EUT
Report No. 191000961SHA-001 AE
8.2 Test Setup and Test Procedure 8.2.1 Definition
Flicker: impression of unsteadiness of visual sensation induced by a light stimulus whose luminance or spectral distribution fluctuates with time.
Pst:
Short-term flicker severity.
Plt:
long-term flicker severity.
dc:
maximum steady state voltage change during an observation period.
dmax: maximum absolute voltage change during an observation period.
d(t): time function of the relative r.m.s. voltage change evaluated as a single value for each successive half period between zero-crossings of the source voltage, except during time interval in which the voltage is a steady-state condition for at least 1s.
8.2.2 Test condition
The EUT was set to produce the most unfavorable sequence of voltage changes.
TTRF55014-01_V1 © 2018 Intertek
Page 28 of 52
Report No. 191000961SHA-001
8.3 Test Protocol
The tested object operated under the operating condition specified in EN 61000-3-3 The following limits apply
- the value of Pst shall not be greater than 1,0. - the value of Plt shall not be greater than 0,65. - Tmax, the accumulated time value of d(t) with a deviation exceeding 3,3 % during
a single voltage change at the EUT terminals, shall not exceed 500 ms. - the maximum relative steady-state voltage change, dc, shall not exceed 3,3 %. - the maximum relative voltage change dmax, shall not exceed:
4% without additional conditions. 6 % for equipment which is: switched manually, or switched automatically more frequently than twice per day, and also has either a delayed restart (the delay being not less than a few tens of seconds), or manual restart, after a power supply interruption. 7 % for equipment which is: attended whilst in use (for example: hair dryers, vacuum cleaners, kitchen equipment such as mixers, garden equipment such as lawn mowers, portable tools such as electric drills), or switched on automatically, or is intended to be switched on manually, no more than twice per day, and also has either a delayed restart (the delay being not less than a few tens of seconds) or manual restart, after a power supply interruption. for manual switch, dmax is measured in accordance with Annex B of standard, average dmax is calculated from 24 times measurement. The rate power of the EUT is no greater than 75W, which is unlikely to produce significant voltage fluctuations or flicker by technical analysis and evaluation. So it is deemed to fulfil the requirements without testing.
TTRF55014-01_V1 © 2018 Intertek
Page 29 of 52
Report No. 191000961SHA-001
Immunity Test
Performance criteria
The performance criteria are based on the general criteria of the standard and derived from the product specification Criterion A: Normal Performance within limits specified by the manufacturer, request or purchaser. Criterion B: Continue to operate as intended after the test. No degradation of performance or loss of function. During the test degradation of performance is allowed, however no change of actual operating state or stored date. Criterion C: Temporary loss of function is allowed, provided the function is self-recoverable or can be restored by the operation of the controls.
Categories of apparatus Category I (fulfill the relevant immunity requirements without testing) Category II (Shall fulfill the tests: ESD, EFT, Inject current, Surge, Dips) Category III (Shall fulfill the tests: ESD, EM fields*) Category IV (Shall fulfill the tests: ESD, EFT, Inject current, Surge, Dips, EM fields)
Note: *only applicable to the ride on toys operating with electronic devices.
TTRF55014-01_V1 © 2018 Intertek
Page 30 of 52
Report No. 191000961SHA-001
9. Electrostatic Discharge (ESD)
Test result:
PASS
9.1 Severity Level and Performance Criterion
9.1.1 Test level
1a Contact discharge
1b Air discharge
Level 1
Test voltage kV 2
Level 1
Test voltage kV 2
2
4
2
4
3
6
3
8
4
8
4
15
X
Special
X
Special
Notes: 1."X" is an open level. The level has to be specified in the dedicated equipment specification. If
higher voltages than those shown are specified, special test equipment may be needed. 2. The gray rows were the selected test level.
9.1.2 Performance Criterion
Performance criterion: B
TTRF55014-01_V1 © 2018 Intertek
Page 31 of 52
9.2 Block Diagram of Test Setup For table-top equipment
ESD simulator
ESD gun
EUT & AE
Report No. 191000961SHA-001
VCP Insulate Support
HCP
Wooden
support
GRP
Note: HCP means Horizontal Coupling Plane VCP means Vertical Coupling Plane GRP means Ground Reference Plane Wooden support is a 0.8m height table
For floor standing equipment
VCP
ESD simulator
ESD gun
EUT &AE
Wooden support
470k Resistor
470k Resistor
GRP
Note: VCP means Vertical Coupling Plane GRP means Ground Reference Plane Wooden support is a 0.1m height rack
TTRF55014-01_V1 © 2018 Intertek
Page 32 of 52
Report No. 191000961SHA-001
9.3 Test Setup and Test Procedure
Measurement was performed in shielded room. Measurement and setting of EUT was applied according to IEC 61000-4-2 Clasuse 7. The test method and equipment was specified by IEC 61000-4-2 with the modifications by EN 55014-2 clause 5.1.
TTRF55014-01_V1 © 2018 Intertek
Page 33 of 52
Report No. 191000961SHA-001
9.4 Test Protocol
Direct discharges were applied at the following selected points:
Test point # A B C D E
Test level [kV] 2/4 2/4 2/4/8 2/4/8 2/4/8
Air/ Contact Contact Contact
Air Air Air
Polarity (+/-) +/+/+/+/+/-
Pass/Fail/NA
Comment
Pass
All touchable screws of enclosure
Pass
Accessible metal parts of the EUT
Pass
Air gap of the switch, button
Pass
The air in-taking opening
Pass
Slots around the EUT
Indirect contact discharges were applied to the VCP and the HCP at the following selected points:
For table top equipment
Point HCP f HCP b HCP r HCP l VCP f VCP b VCP r VCP l
Description 0,1m from the front of the EUT 0,1m from the back of the EUT 0,1m from the right side of the EUT 0,1m from the left side of the EUT 0,1m from the front of the EUT 0,1m from the back of the EUT 0,1m from the right of the EUT 0,1m from the left of the EUT
Point Edge of centre, corner on HCP Edge of centre, corner on HCP Edge of centre, corner on HCP Edge of centre, corner on HCP Edge of centre, corner on VCP Edge of centre, corner on VCP Edge of centre, corner on VCP Edge of centre, corner on VCP
Pass/Fail/NA Pass Pass Pass Pass Pass Pass Pass Pass
For floor standing equipment
Point VCP f VCP b VCP r VCP l
Description 0,1m from the front of the EUT 0,1m from the back of the EUT 0,1m from the right of the EUT 0,1m from the left of the EUT
Point Edge of centre, corner on VCP Edge of centre, corner on VCP Edge of centre, corner on VCP Edge of centre, corner on VCP
Pass/Fail/NA NA NA NA NA
Observation: All the functions were operated as normal during and after test. Conclusion: The EUT met the requirements of Performance Criterion B.
TTRF55014-01_V1 © 2018 Intertek
Page 34 of 52
Report No. 191000961SHA-001
10. Electromagnetic field susceptibility
Test result:
Pass
10.1 Severity Level and Performance Criterion
10.1.1 Test level
Level
Test field strength V/m
1
1
2
3
3
10
X
Special
Notes:
1. X is an open test level. This level may be given in the product specification.
2. The gray row is the selected test level.
10.1.2 Performance Criterion
Performance criterion: A
TTRF55014-01_V1 © 2018 Intertek
Page 35 of 52
10.2 Block diagram of test setup
Report No. 191000961SHA-001
Antenna mast
Field probe EUT Table
Amplifier
Signal generator
Power meter Field monitor
AE Optical fiber
10.3 Test Setup and Test Procedure
Measurement was performed in full-anechoic chamber. Measurement and setting of EUT was applied according to IEC 61000-4-3 clause 7. The test method and equipment was specified by IEC 61000-4-3 with additions and modifications by EN 55014-2 clause 5.5.
10.4 Test Protocol
Test Frequency Polarization Test level
no.: (MHz)
V/m
Modulation
Exposed Pass/Fail/NA Commen
location
t
1 80-1000
H & V
3
1kHz, 80%, SW, AM, 1% step size
All sides
Pass
-
Observation: All the functions were operated as normal during and after test. Conclusion: The EUT met the requirements of Performance Criterion A.
TTRF55014-01_V1 © 2018 Intertek
Page 36 of 52
Report No. 191000961SHA-001
11. Electric Fast Transient/Burst Immunity Test
Test result:
NA
11.1 Severity Level and Performance Criterion
11.1.1 Test level
Open circuit output test voltage (±10%) and repetition rate of the impulses (±20%)
Input and output a.c. power ports Input and output d.c. power ports
Level
Signal lines and control lines ports
Voltage peak Repetition rate Voltage peak Repetition rate
kV
kHz
kV
kHz
1
0.5
5
0.25
5
2
1
5
0.5
5
3
2
5
1
5
4
4
5
2
5
X
Special
Special
Special
Special
Notes : 1. "X" is an open level. The level has to be specified in the dedicated equipment
specification. 2. The gray rows were the selected test level.
11.1.2 Performance Criterion
Performance criterion B
TTRF55014-01_V1 © 2018 Intertek
Page 37 of 52
11.2 Block Diagram of Test Setup 11.2.1 Block Diagram for input a.c./d.c. power line
For table-top equipment
Report No. 191000961SHA-001
Grounding cable
GRP
EFT/B Generator
EUT & AE
0.1m high Insulating support
1.1.1.1.1.1.1.1
Grounding
GRP
cable
For floor standing equipment
Grounding cable
EFT/B Generator
EUT & AE
0.1m high Insulating support
GRP
TTRF55014-01_V1 © 2018 Intertek
Page 38 of 52
Report No. 191000961SHA-001
11.2.2 Block Diagram for output a.c./d.c. power line or signal/control lines For table-top equipment
Grounding cable
GRP EFT/B Generator
EUT
AE
Clamp
Grounding cable
0.1m high
Insulating support
GRP
For floor standing equipment
Grounding cable
EFT/B Generator
EUT
AE
Clamp
GRP 0.1m high Insulating support
11.3 Test Setup and Test Procedure
Measurement was performed in shielded room. Measurement and setting of EUT was applied according to IEC 61000-4-4 clause 7. The test method and equipment was specified by IEC 61000-4-4 with additions and modifications by EN 55014-2 clause 5.2.
TTRF55014-01_V1 © 2018 Intertek
Page 39 of 52
11.4 Test Protocol
Test
Level
No.
[kV]
1
1
2
0.5
3
0.5
Observation: Conclusion:
Report No. 191000961SHA-001
Polarity +/+/+/+/-
Repetition rate kHz 5 5 5
Line for test
Pass/Fail/NA
a.c. power ports
NA
d.c. power ports
NA
Signal lines and
NA
control lines
TTRF55014-01_V1 © 2018 Intertek
Page 40 of 52
Report No. 191000961SHA-001
12. Surge Immunity Test
Test result:
NA
12.1 Severity Level and Performance Criterion
12.1.1 Test level
Level 1
Open-circuit test voltage ±10% kV 0.5
2
1.0
3
2.0
4
4.0
X*
Special
Notes: 1."X" is an open class. This level can be specified in the product Specification 2. The gray rows are the selected level.
12.1.2 Performance Criterion
Performance criterion B
TTRF55014-01_V1 © 2018 Intertek
Page 41 of 52
12.2 Block Diagram of Test Setup
Surge Generator
Report No. 191000961SHA-001
EUT & AE
Insulating support
GRP
12.3 Test Setup and Test Procedure
Measurement was performed in shielded room. Measurement and setting of EUT was applied according to IEC 61000-4-5 clause 7. The test method and equipment was specified by IEC 61000-4-5 with modifications by EN 55014-2 clause 5.6.
12.4 Test Protocol
Test
Level
Polarity Angle
Line for test
Pass/Fail/NA
No.
[kV]
+/-
1
1
+
900 a.c. Mains (line to earth)
2
1
-
2700 a.c. Mains (line to earth)
3
1
+
900
a.c. Mains (line to line)
4
1
-
2700 a.c. Mains (line to line)
5
2
+
900 a.c. Mains (line to earth)
6
2
-
2700 a.c. Mains (line to earth)
Observation: Conclusion:
TTRF55014-01_V1 © 2018 Intertek
Page 42 of 52
Report No. 191000961SHA-001
13. Immunity to Conducted Disturbances, Induced by Radio-frequency Fields
Test result:
NA
13.1 Severity Level and Performance Criterion
13.1.1 Test level
Level 1
Frequency range 150kHz 80MHz
Voltage level (e.m.f.)
U0 [dB(uV)]
U0 (V)
120
1
2
130
3
3
140
10
X
Special
Special
Notes: 1. "X" is an open level. 2. The gray row is the selected test level.
13.1.2 Performance Criterion
Performance criterion: A
13.2 Block Diagram of Test Setup
13.2.1 Block Diagram for a.c./d.c input power line
Block Diagram for a.c./d.c input power line
a.c./d.c. power supply
GRP
RF Generator
with amplifier
6dB
CDN
Attenuator
EUT power input line EUT
3cm high Insulating support
10cm high Insulating support
TTRF55014-01_V1 © 2018 Intertek
Page 43 of 52
Report No. 191000961SHA-001
13.2.2 Block Diagram for output a.c./d.c. power line or signal/control lines Unshielded line
GRP
RF Generator
with amplifier
6dB
EUT
Attenuator
Unshielded line
AE Clamp
3cm high insulating support
10cm high insulating support
Shielded line
GRP RF Generator with amplifier
6dB Attenuator
100
Shielded line
EUT
Ferrite
AE
ring core
3cm high insulating support
10cm high insulating support
13.3 Test Setup and Test Procedure
Measurement was performed in shielded room. Measurement and setting of EUT was applied according to IEC 61000-4-6 clause 7. The test method and equipment was specified by IEC 61000-4-6 with additions and modifications by EN 55014-2 clause 5.3, 5.4.
TTRF55014-01_V1 © 2018 Intertek
Page 44 of 52
Report No. 191000961SHA-001
13.4 Test Protocol
EUT is not required for electromagnetic susceptibility
Test Frequency
Level
Modulation
No.
(MHz)
V (r.m.s.)
1
0.15~230
3
1kHz, 80%, SW,
AM,
1% step size
2
0.15~230
1
1kHz, 80%, SW,
AM,
1% step size
3
0.15~230
1
1kHz, 80%, SW,
AM,
1% step size
For EUT test Electromagnetic field susceptibility
Test Frequency
Level
Modulation
No.
(MHz)
V (r.m.s.)
1
0.15~80
3
1kHz, 80%, SW,
AM,
1% step size
2
0.15~80
1
1kHz, 80%, SW,
AM,
1% step size
3
0.15~80
1
1kHz, 80%, SW,
AM,
1% step size
Injected point a.c. power ports
d.c. power ports
signal lines and control lines
Injected point a.c. power ports
d.c. power ports
signal lines and control lines
Pass/Fail/NA -
Pass/Fail/NA NA -
Observation: Conclusion:
TTRF55014-01_V1 © 2018 Intertek
Page 45 of 52
Report No. 191000961SHA-001
14. Voltage Dips, Short Interruptions and Voltage Variations Immunity Test
Test result:
NA
14.1 Severity Level and Performance Criterion
14.1.1 Test level
Test level
Voltage dip and short
Duration
interruptions
(in period)
% UT
% UT
50Hz
60Hz
0
100
0.5 cycle
0.5 cycle
40
60
10 cycles
12 cycles
70
30
25 cycles
30 cycles
Notes:
1."*" for 0.5 period, the test shall be made in positive and negative polarity, i.e.
starting at 0 and 180, respectively.
2. "**" means "x" is an open duration. This duration can be given in the product
specification. Utilities in Europe have measured dips and short interruptions of duration between
½ a period and 3000 periods, but duration less than 50 periods are most common.
3. If the EUT is tested for voltage dips of 100%, it is generally unnecessary to test for other
levels for the same durations. However, for some cases (safeguard systems or electro-mechanical
devices) it is not true. The product specification or product committee shall give an indication of
the applicability of this note.
4. The gray rows are selected test level.
14.1.2 Performance Criterion
Performance criterion: C
TTRF55014-01_V1 © 2018 Intertek
Page 46 of 52
14.2 Block diagram of test setup
Report No. 191000961SHA-001
Voltage Dips Generator
EUT & AE
1.1.1.1.1.1.1.2 G
Insulating support
GRP
14.3 Test Setup and Test Procedure
Measurement was performed in shielded room. Measurement and setting of EUT was applied according to IEC 61000-4-11 clause 7. The test method and equipment was specified by IEC 61000-4-11 with additions and modifications by EN 55014-2 clause 5.7.
14.4 Test Protocol
Test % UT Voltage dip and short
no.
interruptions
% UT
1
70
30%
2
40
60%
3
0
100% pos half cycle
4
0
100% neg half cycle
Duration (in periods)
25 cycles at 50Hz 30 cycles at 60Hz 10 cycles at 50Hz 12 cycles at 60Hz 0.5 cycle at 50Hz 0.5 cycle at 60Hz 0.5 cycle at 50Hz 0.5 cycle at 60Hz
Pass/Fail/NA
NA NA NA NA NA NA NA NA
Observation: Conclusion:
TTRF55014-01_V1 © 2018 Intertek
Page 47 of 52
Appendix I: Photograph of equipment under test
Report No. 191000961SHA-001
Photo 1 (Outer appearance)
Photo 2 (Outer appearance)
TTRF55014-01_V1 © 2018 Intertek
Page 48 of 52
Report No. 191000961SHA-001
Photo 3 (Outer appearance)
Photo 4 (Outer appearance)
TTRF55014-01_V1 © 2018 Intertek
Page 49 of 52
Report No. 191000961SHA-001
Photo 5 (Switch Knob)
Photo 6 (inner view)
TTRF55014-01_V1 © 2018 Intertek
Page 50 of 52
Report No. 191000961SHA-001
Photo 7 (motor)
Photo 8 (PCB in tool)
TTRF55014-01_V1 © 2018 Intertek
Page 51 of 52
Report No. 191000961SHA-001
Photo 9 (switch) ***END of the report***
TTRF55014-01_V1 © 2018 Intertek
Page 52 of 52
Test Verification of Conformity
Verification Number: 2104033302SHA-V1
On the basis of the referenced test report(s), sample(s) tested of the below product have been found to comply with the standards harmonized with the directives listed on this verification at the time the tests were carried out. Other standards and Directives may be relevant to the product. This verification is part of the full test report(s) and should be read in conjunction with it <them>. This verification replaces previous verification dated: 26 Nov, 2019: 191000962SHA-V1
Once compliance with all product relevant
mark directives are verified, including any relevant e.g. risk
assessment and production control, the manufacturer may indicate compliance by signing a Declaration of
Conformity themselves and applying the mark to products identical to the tested sample(s).
Applicant Name & Address:
Manufacturing Site Name & Address: Product Description: Ratings & Principle Characteristics: Models/Type References: Brand Name: Relevant Standards:
Verification Issuing Office Name & Address: Date of Tests: Test Report Number(s):
Positec Technology (China) Co., Ltd. 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P.R.China CHANGZHOU STADARD ELECTRIC APPLIANCE CO.,LTD NO.29 The Chunqiu Road Minghuang Industrial Wujin Changzhou, P.R.China. Battery-powered Delta Sander
20Vd.c., n0:12000/min
WX822, WX822.* (* = A to Z or 0-9 which means different package and/or accessories) WORX EN 62841-1: 2015+AC: 15 EN 62841-2-4:2014 the machinery directive: 2006/42/EC Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China Aug 09, 2021 191000962SHA-001+A1, 191000962SHA-002+A1
Signature
Name: Jonny Jing Position: Operation Manager Date: Aug 09, 2021
This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Verification are relevant only to the sample tested/inspected. This Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
Intertek
Page 1 of 1
GFT-OP-11b (22-August-2019)
iLovePDF