CITLLA L570 Wireless Mouse User Guide

1. Package Contents

Please verify that all accessories are present:

• A: Mouse
• B: Charging Cable

2. Charging Precautions

Warning: Charging is limited to 5.0V voltage. Avoid using fast chargers as they may damage the mouse. It is recommended to use the provided charging cable and charge the mouse via a computer USB port.

3. Wireless USB Receiver Storage and Use

Storage:

1. Open the mouse case from the tail arrow.
2. Fetch out the wireless USB receiver.

Use: Plug the USB receiver into a device's USB-A port.

4. Power Switch

Locate the power switch at the bottom of the mouse.

5. Switching Wireless Signal

The mouse supports three wireless signal modes:

• A (White light): Wireless USB receiver signal
• B (Blue light): Bluetooth 1
• C (Green light): Bluetooth 2

After switching to the desired connection type, insert the USB receiver into the corresponding device or find the Bluetooth signal on the device and connect.

6. Change Stored Wireless Information

Each Bluetooth connection can only store information for one device. To connect to a new device, clear the old information:

1. Access Bluetooth Settings on your device.
2. Clear the old device information.
3. To clear information, click the DPI button to switch to blue/green light, then hold the button for 3 seconds. The light will flash rapidly, indicating the old device information has been cleared and the mouse is discoverable by new devices.

7. DPI Adjust

Click the DPI button to adjust the mouse sensitivity. The DPI level is indicated by the number of times the light flickers:

• 1000 DPI
• 1600 DPI
• 2400 DPI
• 3200 DPI

8. Low Battery Indicator Light

When the mouse battery is low (less than 7 days of expected use), a white indicator light will automatically light up and flicker. Please charge the mouse promptly.

9. Smart Flying Scroll Wheel & Left/Right Scroll

• Vertical Scrolling: Quickly navigate to the top or bottom of files or websites by flicking the scroll wheel up or down at speed.
• Horizontal Scrolling: Navigate left or right within files or websites by pressing the scroll wheel to the left or right.

10. About Using on Mac Systems

The Back and Forward buttons may not function on Mac systems unless the system switch button on the mouse is set correctly. Switch to the appropriate system (Mac1 or Mac2) based on your system language, as listed below:

Additional Mac Settings:

• Tracking Speed: Adjust cursor speed.
• Natural Scrolling: Content tracks finger movement.
• Secondary Click: Set to right-click.
• Smart Zoom: Double-tap with one finger.

11. About Mouse Wheel Direction on Mac Systems

To adjust the mouse wheel direction on Mac systems:

1. Open System Settings and navigate to Mouse Settings.
2. Enable the "Natural scrolling" option.
3. Ensure the system switch button (red button) at the bottom of the mouse is set to "Mac".

Functions Overview

The mouse has several programmable buttons and indicators:

Windows/Mac Button Functions:

1. Left Button
2. Right Button
3. Smart Flying Scroll Wheel
4. DPI Button
5. Forward Button
6. Back Button
7. Devices Switch Button
8. Devices Indicators:

• 2.4G: White Indicator
• Bluetooth 1: Blue Indicator
• Bluetooth 2: Green Indicator
• DPI Indicator
• Low power indicator

9. ON/OFF Button
10. Windows/Mac System Switch Button
11. Charging indicator light

Device Switching and Indicators

Fast switching between multiple devices: The Bluetooth will remember connected devices. If the device's wireless signal is active, simply click the device switch button to automatically connect to the corresponding device, enabling fast switching.

System Switch Button:

• Short Click: Top light flashes twice (Windows OS)
• Short Click: Top light flashes 3 times (Mac1 OS)
• Short Click: Top light flashes 4 times (Mac2 OS)
• Long-press for 5 seconds: All top lights on for 2 seconds (Restore factory defaulted setting).

Charging Indicator Light:

• Charging: Top light flashes (white light)
• Fully Charged: Top light is solid (white light)