One moment, please...
User Guide for JOHN LEWIS models including: BALDWIN Table Lamp
23/03/2021. 01 02 Parts list Qty Introduction Thank you for purchasing this Baldwin Table Lamp. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Warnings This is a Class ll product and must NOT be earthed. Please read these instructions carefully before commencing any work. ...
Please retain these instructions for future reference. 5 year guarantee ... 23/03/ 2021 ... Please read these instructions carefully before commencing any work.
Mar 23, 2021 · 23/03/2021. 01 02 Parts list Qty Introduction Thank you for purchasing this Baldwin Table Lamp. Please read the instructions carefully before use to ensure safe and ...
File Info : application/pdf, 2 Pages, 184.61KB
DocumentDocumentCaring for your product We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Aftercare and Troubleshooting If you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & Partner Technical Support on 03301 230106. Specification Max. power: 40W Voltage: 220240V, 50Hz IP rating: 20 Weight: 1.66kg 5 year guarantee At John Lewis & Partners we test every light to high quality standards so we are able to offer you a 5 year guarantee. Recycling This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk. John Lewis Partnership 171 Victoria Street London SW1E 5NN johnlewis.com Made in China Please retain these instructions for future reference. 23/03/2021 BALDWIN TABLE LAMP USER GUIDE Introduction Warnings Parts list Light fitting Thank you for purchasing this Baldwin Table Lamp. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. This is a Class ll product and must NOT be earthed. Please read these instructions carefully before commencing any work. Your lamp has been packaged as separate parts to prevent damage during transit. When manoeuvring or assembling this product, it must be lifted from the bottom section. The lamp must be protected by a 3 amp fuse in the mains plug. If you are in any doubt, please consult a qualified electrician. For your safety, always switch off the supply before cleaning or adjusting. If the mains cable becomes damaged it must only be replaced by a technically competent, qualified person. Qty 1 Product assembly 1 A C D E 2 A Shade 1 Recommended bulb Recommended bulb (not included) 1 x 6W SES LED Golf (dimmable), or 1 x 28W SES Eco Halogen Golf, or B 1 x 40W (Max.) E14 Golf When changing a bulb, always switch off at the mains and allow the bulb to cool before handling. Dispose of used bulbs carefully. Do not exceed the rated power stated or use a different shape bulb from that indicated on the fitting. 01 Carefully unpack the carton, making sure all the parts are present before assembly. Fit the shade (C) by slotting over the lampholder and secure with the shade ring (D). Before plugging the lamp in, fit the recommended bulb (E) as per the details overleaf. If an LED bulb is used, it must be dimmable. Plug the table lamp into the mains. Switch on using the rotary dimmer switch (B). Your table lamp is now ready for use. The angle of the light can be adjusted by loosening the adjustment key (A), changing the angle, and then re-tightening the key. Allow the shade to cool for 10 minutes prior to adjusting the shade. 02