Instruction Manual for SpeedyBee models including: Bee35 PRO 3.5 inch RC Maniak, Bee35, PRO 3.5 inch RC Maniak, inch RC Maniak, RC Maniak, Maniak
Rama SpeedyBee Bee35 PRO 3.5 inch RCManiak
1 CNC head part installation M2 (6mm) button head hex socket screw M2.5 (20mm) aluminum standoff M2.5 (8mm) button head hex socket screw 2 Antenna Installation Sequence 1 insert the O-ring into the antenna to secure it on the TPU antenna base. 2 FC Mounting Hole | Motor Mounting Hole Motor installing hole distance: 12*12mm M2 (6mm) screws are recommended 20*20 flight controller mounting holes 25.5*25.5 AIO flight controller mounting holes 30.5*30.5 flight controller mounting holes 3 ESC Recommended cable length for 25.5 AIO: 52mm Recommended cable length for 20mm MINI: 62mm *(Note: Assembly diagram, motor not included in the frame) 11 Scale 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 4 Multi-function Antenna Mount SMA antenna installation position. Adjustable GPS Mount (12*16mm) TYPE-C Module Self-tapping Screw M2.5 (6mm) Tpye-C Select the corresponding interface to connect to the FC M3 (15mm) aluminum standoff Micro USB 5 (*Note: pictures for assembly reference only. Frame doesn't include antenna) *( CNC cooling part installation 2 Install the video transmitter antenna into the TPU antenna mount. 1 First, install the aluminum alloy at the bottom position. 2 3 Install the video transmitter into the aluminum bracket (pay attention to the orientation), and then secure it with the TPU video transmitter mount. Note: BEE35 comes with a carbon fiber base plate, while BEE35 PRO comes with an aluminum alloy heat sink base plate. 6 Suggesting place for main power cable It is recommended to keep the power cable of ESC to be about 100mm. Please refer to your own battery for actual length. 7 CNC cooling part installation M3 (14mm) button head hex socket screw M2 (6mm) button head hex socket screw M2 (3mm) button head hex socket screw O3 Air Unit or RunCam Link installation O3 Air UnitRunCam Link 8 Bottom screw installation M3 (14mm) button head hex socket screw 9 Installation Illustration M3 (8mm) button head hex socket screw M3 (10mm) button head hex socket screw M3 (9mm) flat hex socket screw M3 (7mm) flat hex socket screw M3 (14mm) button head hex socket screw 10 T-antenna installation M2(6mm) M2 (7mm) button head hex socket screw 11 Detachable anti-vibration camera base mount M3 (10mm) button head hex socket screw M3 nut M3 (8mm) button head hex socket screw M3 (20mm) button head hex socket screw Note: This accessory needs to be purchased separately 12Adobe Illustrator 25.4 (Windows) GPL Ghostscript 9.53.3