Operating Instructions
G50 Smartwatch
Please read the instructions carefully and keep it safe.
Bind Watch
You can set up the watch through the "InxFit" app for iOS or Android devices. The steps are shown as follows:
Notes: The hardware platform of the equipment system shall meet requirements.
I. Bind Watch
- System Requirements:
- iOS 10.0 version or above
- Android 6.0 system or above
- Support Bluetooth 5.0
Correct operation: Scan the QR code below or download InxFit APP through the mobile APP store to pair with the watch. ✔️
Wrong operation: Pair the watch directly with the Bluetooth in your mobile phone's settings. ❌
2. Bind process
(1) Turn on the Bluetooth and GPS on your mobile phone.
Visual description: Mobile phone settings screen showing Bluetooth is ON.
(2) Bind Device:
Visual description: InxFit app screen showing 'Device List'. Options include 'Add device', 'Message Notification', 'Call Reminder', 'Alarm reminder', 'Firmware upgrade', 'More', and 'Bind device'.
(3) Select product model: G50
Visual description: App screen showing 'Please select your device' with 'G50' listed, or a QR code scan option.
(4) Click "Ok" to complete binding.
Visual description: App screen showing 'Bind successfully' with a 'Complete' button.
Visual description: App screen showing syncing progress ('Syncing 67%') with activity data like steps and heart rate.
Notes:
①. During binding process, InxFit will prompt you to enable GPS and Bluetooth, and authorize InxFit to get access to the GPS on your mobile phone.
②. Apple phones need to click "pair". The watch has a variety of message reminders.
Visual description: Bluetooth Pairing Request pop-up: "G50" would like to pair with your iPhone. [Cancel] [Pair]
3. Synchronous Data:
In daily wear, the watch can detect all kinds of product data. The user needs to connect the watch with Bluetooth on the APP before synchronous operation.
Visual description: InxFit app screen showing activity data (heart rate, steps) and a prompt to 'swipe down the page' for sync.
Notes! Please synchronize the data at least once within 7 days to avoid data loss at the watch end.
Instruction for Use
1. Charging Schematic
Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time.
Visual description: Diagram showing the watch being connected to a charging dock with a USB cable. A charging screen is depicted with battery percentage and time.
Make sure the metal contacts of the watch and of the Charging dock match well, then the watch can be charged properly.
2. Wear/Install
Wear: Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position.
Replace the strap: Flip the switch and take out the wristband.
Tip: Wearing too loosely may affect the accuracy of heart rate data.
Operating Instructions
1. Definition of Key Function
Right Key:
- Short press: Return to previous interface.
- Long press: Start.
2. Watch Dial Switch
Long press the main interface to switch the dial. The watch supports switching among 4 dials.
Visual description: Examples of different watch faces/dials are shown.
Note: Cloud dial and custom dial can be set in the APP.
3. Main Interface Operation
Swipe the screen to enter different interfaces.
Visual description of swipes:
- Swipe up: Accesses Status screen with icons for DND Mode ?, Vibration ✊, Brightness ☀️, Settings ⚙️.
- Swipe down: Displays notification messages (e.g., Facebook, Line).
- Swipe left: Shows activity data like steps, distance, and calories.
- Swipe right: Displays detailed data like heart rate and sleep.
Notice: Display notification message content.
Status Screen Details
The status screen provides quick access to various settings:
- Wrist-up To Wake Screen
- DND Mode (Do Not Disturb)
- Wake Time Adjustment
- Brightness Adjustment
- Dial Settings
- Shutdown/Factory Reset Settings
- About: Download APP and connect QR code.
Function Introduction
1. Icon Function Introduction
- Sports Mode ?: The watch supports 10 sports modes. Press the right button of the watch to pause or exit the sports mode. The sports mode data will be permanently stored in the APP.
- Sports Record ?: You can view the last 50 detailed sports data records.
- Heart Rate ❤️: The heart rate is automatically detected throughout the day. Please wear tightly during the test and do not leak green light. Visual description: Heart rate reading (e.g., MAX 126 bpm, MIN 75 bpm, Resting 76 bpm).
- Daily Activity Data ?: Displays steps, calories, and distance data for the whole day.
- Sleep Data ?: The watch can automatically test the sleep data every day. Please wear the watch well before sleeping. At the end of the day, sleep time and sleep status are displayed (e.g., Deep, REM, Light, Awake).
- Breath Training ?️: Helps to adjust and relax your mood. Visual description: Breathing animation and "GOOD JOB!" message with heart rate data.
- Alarm Clock ⏰: Up to 10 alarms can be quickly set on the watch. When the set time is reached, the watch will vibrate to remind you.
- Stopwatch ⏱️: Allows timing with start, stop, and lap functions.
- Countdown ⏳: Features pre-set countdown timers (e.g., 1 min, 3 min, 5 min, 10 min).
- Music Control ▶️: The watch can control the music of the mobile phone to go to the previous, next, or pause music playback. The watch cannot play music.
Notes: For more functions and operation, please check the "InxFit" software of the mobile phone.
Product Parameters
| Parameter | Value |
|---|---|
| Model | G50 |
| Screen type | 1.69-inch color screen |
| Battery capacity | 260mAh |
| Charging voltage | 5V±0.2V |
| Charging time | about 2.5 hours |
| Battery life | over 7days |
| Waterproof level | IP68 |
| Weight of product | 38g |
| Operating temperature | -20°C–40°C |
| Bluetooth version | BLE 5.0 |
| Product frequency | 2402-2480MHz |
| Max. transmission power consumption | 0 dBm |
Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or sauna. But suitable for swimming in swimming pool or in shower (cold water) and shallow beach.
Cleaning and Maintenance
It is recommended to wear and maintain according to the following three points:
- (1) Keep the product clean;
- (2) Keep the product dry;
- (3) Do not wear it too tight.
Do not use household cleaners to clean the watch, but use soap-free detergent. It is recommended to use alcohol to scrub stains that are not easy to remove.
Frequently Asked Questions
- Mobile APP search for the watch failed
- (1) It is recommended to update InxFit to the latest version.
- (2) It is recommended to close all programs, restart the Bluetooth, and then connect.
- (3) Confirm whether the mobile phone system meets Android 6.0 or iOS 10.0 or above.
- The watch received no alerts, text messages or phone calls
- (1) You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
- (2) The iPhone needs to be paired with the watch via Bluetooth. (Please check the column of "Synchronous Data" for details)
- (3) You need to keep your watch connected to Bluetooth.
- Bluetooth is often disconnected
- (1) If the distance between the watch and the mobile phone is too far, the connection effect of more than 7m Bluetooth is obviously weakened.
- (2) Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the Bluetooth connection signal.
- (3) Whether the Bluetooth function of the mobile phone is abnormal.
- About data backup
The data of the watch is synchronized at least once every 7 days to the mobile phone (the watch end only keeps the data of the last 7 days).
- How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right-key restart
Restore factory settings: connect watch to APP > open APP > device > model > more settings
- Do I need to keep my Bluetooth on when I wear my watch?
- (1) For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
- (2) For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone's Bluetooth, and maintain the connection with the mobile phone.
More detailed questions can be answered with help and feedback in the APP. Operation steps: InxFit > [Help] > help and feed back
Matters Needing Attention
- Watch data needs to be kept once every 7 days to avoid data loss.
- The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.
- Sports mode supports up to 6 hours of exercise at a time.
- The watch has a waterproof level of IP68 and supports cold water shower, swimming, but not diving.
- Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.
- When your heart rate is measured, keep your arm still during the test.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance.
Compliance Marks: UKCA, CE, RoHS, FC. Made in China. FCC ID: 2AZHM-G50.
