Inventor Air Conditioning Systems Remote Controller

User's Manual

This manual provides instructions for the Inventor Air Conditioning Remote Controller.

Models: PFUVI-09WFI/PFUVO-09, PFUVI-12WFI/PFUVO-12, PFUVI-18WFI/PFUVO-18, PFUVI-24WFI/PFUVO-24

Attention

Before operating, point the remote controller's signal transmitter towards the air conditioner's receiver.
The remote controller operates within a range of up to 8 meters.
Ensure there are no obstacles between the remote controller and the unit.
Do not hit, drop, or throw the remote controller.
Avoid exposing the remote controller to direct sunlight or near heat sources.
Use two AAA batteries of the same type.
Do not use rechargeable batteries.
Do not mix new and used batteries.
Remove batteries if the remote controller will not be used for an extended period.
If there is no response or communication indication, replace batteries with new ones.
If the display resets upon button press, replace batteries with new ones.
Always dispose of used batteries properly.

Note: Images are for illustration purposes only. Actual unit may differ slightly. Cooling-only units do not have heating functions; attempting to use them will not activate the feature.

Function Buttons (Closed Cover)

The remote controller features a signal transmitter and several buttons. Buttons on the cover are operational only when the cover is closed.

1. ON/OFF Button: Starts or stops the unit. Timer and Sleep functions are deactivated when the unit is turned off.
2. SPEED Button: Selects fan speed. Options include Low, Mid, High, and Auto.
3. Temperature Adjustment Buttons (∧/∨): Increase or decrease the set temperature by 0.5°C. Continuous pressing allows for rapid changes. Temperature range: 16°C - 32°C.
4. COOL Button: Activates cooling mode.
5. HEAT Button: Activates heating mode. (Note: Not available on cooling-only units).
6. SWING Buttons (SWING ↑ and SWING →): Activate automatic louver movement (vertical or horizontal). Press again to deactivate. Swing settings are saved per operation mode.

Function Buttons (Open Cover)

Opening the cover reveals additional buttons:

1. ON/OFF Button: Starts or stops the unit.
2. MODE Button: Selects the operation mode. The sequence is AUTO → COOL → DRY → HEAT → FAN.
3. SPEED Button: Selects fan speed (Low, Mid, High, Auto).
4. TURBO Button: Activates turbo fan speed. The TURBO indicator lights up. Press again to deactivate. Available in cooling or heating modes.
5. SILENCE Button: Activates silent mode. The SILE indicator lights up. Press again to deactivate.
6. TIMER Button: Sets ON or OFF timers. Press TIMER once; H and ON/OFF indicators flash. Use ∧/∨ to set time (0.5-24 hours). Press TIMER again to confirm. If no button is pressed for 10 seconds, the setting is cancelled. Pressing TIMER again deactivates the set timer.
7. HEALTH Button: Activates/deactivates the ionizer and UVC functions.
8. SLEEP Button: Activates sleep mode for 10 hours, after which the last set operation resumes. Pressing MODE or ON/OFF deactivates Sleep mode. If TIMER OFF is also set, the unit will turn off according to the timer.
9. iFEEL Button: Activates iFEEL mode, displaying room temperature and operating based on the remote's location. Cannot be used in FAN mode.
10. DISPLAY Button: Turns off the unit's display. Pressing again flashes the display for 5 seconds, then shows ambient and set temperatures.
11. iCLEAN Button: Starts the self-cleaning function to remove dust and moisture from the evaporator. Can be stopped by pressing iCLEAN or ON/OFF. Terminates automatically within an hour. Note: Does not replace regular cleaning and maintenance.
12. ELE.H Button: Activates supplementary electric heating in heating mode (for applicable models).
13. Anti-FUNGUS Button: Helps prevent mold and odors. To enable, turn off the unit and remote, point the remote at the unit, and press and hold Anti-FUNGUS. The unit beeps (5 times, then 5 more). To disable, repeat the process (beeps: 5 times, then 3). Pressing the button once activates/deactivates the function. Available in cooling, dry, and auto modes. Forces 3 minutes of heating mode (or fan mode for cooling-only units) at low fan speed. It is recommended to let the operation complete.
14. SPOT SWING Button: Activates automatic horizontal louver movement. Press again to deactivate.
15. ECO Button: Activates energy-saving mode for optimal power consumption. Deactivates automatically after 8 hours. Can be manually deactivated by pressing ECO again. If TIMER OFF is set, the unit will turn off according to the timer. Note: ECO mode is only available in cooling operation.
16. iFavor Button: A shortcut to save and recall favorite settings (mode, fan speed, temperature, swing). To save, select desired settings and press and hold iFavor for 3 seconds. The display flashes 3 times. Only one setting can be saved at a time; new settings overwrite previous ones. To activate saved settings, press iFavor once.

Use of Remote Control

Insert/replace batteries

1. Open the battery cover by sliding it.

2. Insert two new AAA batteries, observing the polarity (+ & -).

3. Close the battery cover by sliding it.

Automatic Operation Mode (AUTO)

Press ON/OFF to start the air conditioner.
Press MODE and select AUTO. In AUTO mode, the unit adjusts temperature and switches between cooling, heating, and fan modes based on room conditions.
Press SPEED to set fan speed (LOW, MID, HIGH, AUTO).

Cooling/Heating Operation Mode

(Heating mode is not available on cooling-only units)

Press ON/OFF to start the air conditioner.
Press MODE and select cooling or heating mode.
Press ∧ or ∨ to set the desired temperature (16°C - 32°C).
Press SPEED to set fan speed (LOW, MID, HIGH, AUTO).

Fan Operation Mode

Press ON/OFF to start the air conditioner.
Press MODE and select FAN mode.
Press SPEED to set fan speed (LOW, MID, HIGH, AUTO).

Note: Temperature settings have no effect in FAN mode.

Dry Operation Mode

Press ON/OFF to start the air conditioner.
Press MODE and select DRY mode.
Press ∧ or ∨ to set the desired temperature (16°C - 32°C).
Press SPEED to set fan speed (LOW, MID, HIGH, AUTO).

Note: This manual covers all remote controller functions. Refer to the air conditioner's user manual for unit-specific functions.

General Information

All images in this manual are for explanatory purposes. The actual product may have slight differences in appearance, but operations and functions remain the same. Inventor A.G. S.A. is not responsible for any typographical errors. Product design and specifications are subject to change without prior notice for improvement.

For details, contact the manufacturer at +30 211 300 3300 or your sales agency. Updates to the manual will be posted on the manufacturer's website. Always check for the latest version.

Scan here to download the latest version of this manual: www.inventorairconditioner.com/media-library

	Inventor Air Conditioning Remote Controller User Manual This manual provides comprehensive instructions for using the Inventor Air Conditioning Remote Controller, covering basic and advanced functions, button operations, and timer settings for models AR5VI-09WFI/AR5VO-09, AR4VI32-12WFI/AR4VO32-12, AR5VI-18WFI/AR5VO-18, and AR5VI-24WFI/AR5VO-24.
	Inventor Air Conditioning Remote Controller User Manual Comprehensive user manual for the Inventor remote controller for air conditioning systems, covering specifications, functions, and operation. Includes models AR5VI-09WFI/AR5VO-09 through AR5VI-24WFI/AR5VO-24.
	Inventor Wall Mounted Air Conditioner User Manual & Guide Explore the features and operation of Inventor's wall-mounted air conditioners with this detailed user manual. Learn about installation, maintenance, troubleshooting, and smart app connectivity for optimal home comfort.
	Inventor Air Conditioning Remote Controller User Manual This user manual provides detailed instructions for operating the Inventor remote controller for air conditioning systems. It covers specifications, button functions, screen indicators, basic and advanced operations, and troubleshooting.
	Inventor Air Conditioning Remote Controller User Manual This user manual provides comprehensive instructions for operating the Inventor Air Conditioning Systems remote controller. It covers specifications, button functions, screen indicators, basic and advanced operations, and troubleshooting tips.
	Inventor Air Conditioning Systems Wi-Fi Function User Manual User manual for Inventor Air Conditioning Systems with Wi-Fi Function, detailing setup, account registration, home management, and device connection via the Inventor Control app.
	Inventor Aria Air Conditioner - Features and Specifications Discover the Inventor Aria air conditioner, offering advanced features like HEPA filtration, ionizer, and triple action filter for a fresh indoor climate. View detailed specifications, energy ratings, and model comparisons.
	Inventor LEON Air Conditioner: Ultimate Power, Energy Savings & Clean Air Discover the Inventor LEON series air conditioners, offering ultimate power, energy savings, and clean air with advanced features like WiFi connectivity, UV-C technology, and ECO mode. View detailed specifications for models LHUVI/LHUVO 09, 12, 18, and 24.