D-Link AQUILA PRO AI Router Configuration for Spark (New Zealand)

Spark New Zealand Connection Types

• Fibre / UFB
• VDSL

Router access: https://192.168.200.1

The factory-assigned login password is printed on the label on the back of the router.

Configuration for Fibre / UFB Connection

1. Navigate to Settings > Internet.

2. Select “PPPoE” for "My Internet Connection is".

3. Enter your username and password as advised by your Internet Provider.

4. Under Advanced Settings, set MTU to 1492. Save the settings.

5. Select the VLAN tab.

6. Set "Triple-Play" to Enabled.

7. Set "Internet VLAN TAG" to Enabled and enter "10" in the Internet VLAN ID field. Save the settings.

Visual Aid Description: The interface shows a screenshot of the Internet > IPv4 settings page. Key fields highlighted include "My Internet Connection is: PPPoE", "MTU: 1492", and the "Save" button. Another screenshot shows the Internet > VLAN settings page with "Triple-Play" set to "Enabled" and "Internet VLAN ID: 10" configured.

Configuration for VDSL Connection

1. Navigate to Settings > Internet.

2. Select “Dynamic IP (DHCP)” for "My Internet Connection is".

3. Under Advanced Settings, set MTU to 1492. Save the settings.

Note: Your provider-supplied VDSL modem should be set to PPPoE authentication with your username/password and Internet VLAN Tag set to 10.

Visual Aid Description: The interface shows a screenshot of the Internet > IPv4 settings page. Key fields highlighted include "My Internet Connection is: Dynamic IP (DHCP)" and "MTU: 1492", and the "Save" button.