Candy Washing Machine

Introduction

? Please read these instructions for use carefully and all other information enclosed with the washing machine. Keep all documentation in a safe place for future reference or for any future owners.

? Note: this machine is solely for domestic use.

Notes on disposal

All packaging material used is environmentally-friendly and recyclable. Please help dispose of the packaging via environmentally-friendly means ♻️.

Your supplier or local council will be able to give you details of current means of disposal.

Valuable materials can be salvaged from an old appliance via scrap reprocessing.

? Note: pull out the mains plug ? from any old appliance. Cut the power cable ✂️ and dispose of it, together with the plug.

When disposing of an old washing machine, please ensure that the door lock ? is rendered inoperable to prevent children ? shutting themselves in the appliance.

Contents

• Introduction
• General delivery notes
• Safety notes
• Quick start
• Description of controls
• Programme Table
• Programme selector
• Detergent drawer
• Detergents, washing aids and amounts to use
• Useful advice for the user
• The main wash
• Cleaning and routine maintenance
• Investigating malfunctions
• Technical data
• Setting up + installation

BEFORE SWITCHING ON THE APPLIANCE MAKE SURE IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT BRACKETS ARE REMOVED AS SHOWN IN PAGE 27.

General delivery notes

Please check that the following items are delivered with the appliance:

• Instruction manual
• Certificate of guarantee
• Inlet hose
• Liquid detergent or liquid bleach compartment

Check that no damage has occurred during transit, and if so, call your nearest Authorised Technical Support Service agent.

Safety notes

? Note: for cleaning or maintenance of the washing machine.

1. Pull out the plug ?
2. Turn off the tap ?
3. Candy equips all its appliances with earthing. Ensure that the mains supply is earthed, and if it is not, seek assistance from a qualified person.
4. Do not touch the appliance when hands or feet are wet or damp. Do not use the appliance with bare feet.
5. The use of adapters, multiple connectors and/or extensions is not recommended.

? Note: water temperature can reach 90°C during the wash cycle.

6. Check there is no water left in the drum before opening the door.
7. Do not allow children ? or unauthorised persons to use the appliance without supervision.
8. Do not pull the power cable or the appliance itself to remove the plug from the socket.
9. The appliance must not be exposed to weather conditions (rain, direct sun, etc...)
10. When moving the appliance never lift it by the controls or by the detergent drawer. When in transit never rest the door against the trolley or transport the appliance without the polystyrene base.

N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed.

If the appliance is not running properly or breaks down, switch it off, turn off the tap ? and do not tamper with the appliance. Consult only the Authorised Technical Support Service for possible repair and ask them to use original spare parts. Failure to comply with the above can compromise the safety of the appliance.

If the appliance's power cable should ever need replacing, consult the Authorised Technical Support Service.

Quick start

Washing

• Open the door by using the handle "A" (Fig. 1, page 6)
• Select laundry ? and put it in the machine
• Close the door ?
• Put detergent in the compartments as indicated in the programme guide in this instruction manual
• Select programme ⚙️
• Wait for the "STOP" indicator light to flash
• Press additional function buttons (if required)
• Press the "Start/Pause" button (page 7) ▶️
• After few seconds the appliance starts working.

After washing

• The indicator light “STOP” will go on.
• Wait for the door lock to be released (about 2 minutes ⏳ after the programme has finished). The "Door Security" indicator light will go out.
• Switch off the washing machine by turning the selector to “OFF” position.
• Open the door ? and remove the laundry.

Ensure that the machine is correctly installed in line with the instructions found on page 27.

Description of controls

• Door handle (A): Press the finger-bar inside the door handle to open the door.
• Door Security indicator light (B): The "Door Security" indicator light is illuminated when the door is fully closed and the machine is ON. When "Start/Pause" is pressed on the machine with the door closed the indicator will flash momentarily and then illuminate. If the door is not closed the indicator will continue to flash. A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the "Door Security" light has gone out before opening the door. At the end of the cycle turn the programme selector to "OFF".
• Start/Pause button (C): When a programme is selecting, wait for the “STOP” indicator light to flash before pressing the "Start/Pause" button ▶️. Press to start the selected cycle (according to the selected cycle one indicator lights will go on). NOTE: When the "Start/Pause" button has been pressed, the appliance can take few seconds before it starts working.

Changing the settings after the programmes has started (PAUSE)

The programme may be paused ⏸️ at any time during the wash cycle by holding down the "Start/Pause" button for about two seconds. When the machine is in the paused mode, the indicator light "Time To End" and option buttons will flash. To restart the programme, press the "Start/Pause" button once again. If you wish to add or remove items during washing, wait 2 minutes ⏳ until the safety device unlocks the door. When you have carried out the manoeuvre, close the door ?, press "Start/Pause" button ▶️ and the appliance will continue working where it left off.

CANCELLING THE PROGRAMME

To cancel the programme the programme selector should be rotated to the "OFF" position.

Option buttons

The option buttons should be selected before pressing the "Start/Pause" button.

Super Rapid button (C1 508)

Press the button to select or deselect this function. Pressing this button reduces the time of the wash programme by a maximum of 50 minutes depending on the programme and the temperature selected. The "Super Rapid" button can be used for washing loads of 1 to 5 kg ?. This option may only be utilised on COTTONS and SYNTHETICS programmes.

Crease Guard button (C1 105)

Press the button to select or deselect this function. The Crease Guard function minimizes creases as much as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.

• MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no spinning and then a delicate spin assures the maximum relaxation of the fabrics.
• DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in water until it is time to unload. When you are ready to unload, press the "Crease Guard" button – this will drain.
• WOOLLENS – after the final rinse the fabrics are left in water until it is time to unload and the button indicator blinking. When you are ready to unload, press the "Crease Guard" button, this will drain and spin ready for emptying.

If you do not want to spin the clothes and activate drain only:

• Turn the programme selector to the "OFF" position;
• Select programme drain only ?;
• Switch on the appliance again by pressing the "Start/Pause" button ▶️.

Activa Rinse button (C1 508 - C1 105)

Press the button to select or deselect this function. Thanks to the new electronic system, it is possible to effect a new special rinse cycle by using this button. The addition of a lot more water and the new action combining of cycles of rotation of the drum with loading and unloading of water, allow the laundry to be perfectly rinsed. This function has been designed for the people with delicate and sensitive skin, for which the smallest residue of detergent can cause irritations or allergies. It is advisable to also use this function for the children's items and in case of washings of very dirty items, for which it is due to use a lot of detergent, or in the washing of towelling items whose fibers mostly have the tendency to hold the detergent. This option is not available on WOOLLENS programmes.

No Spin button (C1 508)

By pressing this button it is possible to eliminate the spin-drying ?? on all programmes. This operation is suitable for programmes at 90°C and at 60°C in case of special treated fabrics (cottonova or permanent press) or for mixed delicate fabrics.

Slow Spin button (C1 105) 1000/400

This button reduces the spin speed to 400 r.p.m. ?. Note: this model is fitted with an electronic device that checks the load is balanced correctly ⚖️. If the load is slightly unbalanced the machine will re-balance it automatically to carry out the normal spin. If, after several attempts, balance is not restored, a reduced spin speed will be used. If loads are seriously unbalanced the spin stage will be cancelled. This helps limit vibration ?, reduce noise output ? and improve the washing machine's lifespan.

Delay Start button

Appliance start time can be set with this button, delaying the start by 3, 6 or 9 hours. Proceed as follows to set a delayed start:

• Select a programme ("STOP" indicator light blinks)
• Press "Delay Start" button (each time the button is pressed the start will be delayed by 3, 6 or 9 hours respectively and the corresponding light will blink).
• Press "Start/Pause" ▶️ to commence the Delay Start operation (the indicator light associated with the selected Delay Start time stops blinking and remains ON).

At the end of the required time delay the programme will start.

To cancel the Delay Start function:

• press the "Delay Start" button until the indicator lights will be off (The "STOP" light blinks) and the programme can be started manually using the "Start/Pause" button ▶️ or switch off the appliance by turning the programme selector to "OFF" position.

Warning: If there is any break in the power supply ⚡ while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left off.

Indicator lights

Time To End indicator light

In order to manage your time better, this washing machine features an indicator light system that keeps you constantly informed on the remaining cycle time.

• Indicator light 90: Remaining time above 60 minutes.
• Indicator light 60: Remaining time less than 60 minutes.
• Indicator light 30: Remaining time less than 30 minutes.
• Indicator light 15: Remaining time less than 15 minutes.
• Indicator light STOP: End of the programme.

Buttons indicator light

The indicator light around the option buttons will light when specific options are selected.

Programme selector

Programme selector with "OFF" position

Rotates in both directions. The machine is turned on by selecting a programme via the programme selector. This status will be indicated by the "STOP" indicator light flashing, this light will continue to flash until the machine has started or the machine is returned to the "OFF" position.

Press the "Start/Pause" button ▶️ to start the selected cycle.

Once a programme is selected the programme selector remains stationary on the selected programme till cycle ends.

Switch off the washing machine by turning the selector to "OFF".

Note: The programme selector must be returned to the "OFF" position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started.

Table of Programmes

Please read these notes

When washing heavily soiled laundry it is recommended the load is reduced to 3 kg maximum.

* Programmes according to CENELEC EN 60456.

When only a limited number of articles have stains which require treatment with liquid bleaching agents, preliminary removal of stain can be carried out in the washing machine. Pour the bleach into the liquid bleach container, inserted into the compartment marked "II" in the detergent drawer, and set the special programme "RINSE" ?. When this phase has terminated, turn the programme selector to the "OFF" position, add the rest of the fabrics and proceed with a normal wash on the most suitable programme.

Programme selector

For the various types of fabrics and various degrees of dirt the washing machine has 4 different programme bands according to: wash cycle, temperature and length of cycle (see table of washing cycle programmes).

1 RESISTANT FABRICS

The programmes have been designed for a maximum wash and the rinses, with spin intervals, ensure perfect rinsing. The final spin gives more efficient removal of water.

2 MIXED AND SYNTHETIC FABRICS

The main wash and rinse gives the best results thanks to the rotation rhythms of the drum and to the water levels. A gentle spin will mean that the fabrics become less creased.

3 SPECIAL DELICATE FIBRES

This is a new wash cycle which alternates washing and soaking and is particularly recommended for very delicate fabrics such as Pure Machine Washable Wool ?. The wash cycle and rinses are carried out with high water levels to ensure best results.

4. SPECIALS

SPECIAL "HAND WASH" ✋

This washing machine also has a gentle Hand Wash programme cycle. This programme allows a complete washing cycle for garments specified as "Hand Wash only" on the fabric care label. The programme has a temperature of 30°C and concludes with 3 rinses and a slow spin.

SPECIAL "RINSE" PROGRAMME ?

This programme carries out three rinses with a intermediate spin. It can be used for rinsing any type of fabric, eg. use after hand-washing. This programme can be also used during Bleaching (see table of washing cycle programmes).

SPECIAL "FAST SPIN" PROGRAMME ?

Programme "FAST SPIN” carries out a maximum spin.

DRAIN ONLY ?

This programme drains out the water.

"MIX & WASH SYSTEM" PROGRAMME

This is an exclusive Candy system and involves 2 great advantages for the consumer:

• to be able to wash together different type of fabrics (e.g. cotton + synthetic etc...) NON-FAST COLOUREDS;
• to wash with a considerable energy saving ?.

The "Mix & Wash" programme has a temperature of 40°C and alternate dynamic phases (the drum that turns) to static phases (fabrics in soak in phase of rest) with the programme duration that almost reaching the 3 hours. The energy consumption for the complete cycle is only 850 W/h.

Important:

• the first washing of new coloureds fabrics must be done separately;
• in every case, never mix NON-FAST COLOUREDS fabrics.

32 MINUTE RAPID PROGRAMME 50°C

The 32 minute rapid programme allows a complete washing cycle to be carried out in approximately 30 minutes, with up to a maximum load of 2 kg ? and a temperature of 50°C. When selecting the "32 minute rapid" programme, please note that we recommend you use only 20% of the recommended quantities shown on the detergent pack.

FUZZY LOGIC

Through every wash phase Fuzzy Logic allows the Activa Smart to monitor information on the wash load in the drum. So, as soon as the Activa Smart is set in motion it:

• adjusts the amount of water required ?
• determines the length of the wash cycle ⏳
• controls rinsing ?

according to the type of fabric selected to be washed it:

• adjusts the rhythm of drum rotation for the type of fabric being washed
• recognises the presence of lather ?, increasing, if necessary, the amount of water during rinsing
• adjusts the spin speed according to the load ⚖️, thus avoiding any imbalance.

In this way the ACTIVA SMART is able to decide, by itself, the most suitable programme for each individual wash from the hundreds of possible wash combinations. Fuzzy Logic meets the need for easy use by permitting a simplified programme selection. In fact, the user need only tell the machine the type of fabric in the drum (cotton, mixtures, delicate or woollens) and the degree of soiling ?, to obtain a perfect wash with the highest level of drying possible with a spin which really cares for your clothes.

Detergent drawer

The detergent drawer is split into 3 compartments:

• the compartment labelled "I" is for prewash detergent ?;
• the compartment labelled " " is for special additives ➕, fabric softeners ?, fragrances ?, starch ?, brighteners ✨ etc;
• the compartment labelled "II" is for main wash detergent ?.

If liquid detergents are used, please insert the special container ? supplied into the compartment marked "II" in the detergent drawer. This ensures that the liquid detergent enters the drum at the right stage of the wash cycle.

This special container must be inserted into the compartment marked "II" in the detergent drawer, also when you wish to use the "RINSE" programme as BLEACHING cycle.

? NOTE: Some Detergents are Difficult to utilise. Ensure to use an in drum dispenser if recommended by the detergent Manufacturer.

? Note: only put liquid products in the compartment labelled " ". The machine is programmed to automatically take up additives during the final rinse stage for all wash cycles.

Detergents, washing aids and amounts to use

Choice of detergent

General purpose detergents

• Powder detergents: for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.
• Liquid detergents: particularly suitable for grease stains, such as greasy skin marks, cosmetics and oil. These detergents are not suitable for washing stained laundry, as they do not contain bleach.
• Biological detergents: not all the products available give a really thorough wash.

Additional laundry aids

• Water softener ?: means less detergent can be used where water hardness is classed as hard to very hard.
• Prewash substances ?: for the programmed treatment of stains prior to the main wash. Using them means the subsequent wash can be at a low temperature or with bleach-free detergents.
• Fabric softener ?: prevents static build-up in synthetic fabrics and softens fabrics. If you own a tumble dryer, clothes are softened even without the use of a fabric softener.

Do not put solvents ? in the washing machine!

Keep detergents and other laundry products out of children's ? reach.

Before pouring in the detergent check that there are no foreign bodies ? in the detergent drawer.

Dosage details are usually shown on the detergent packaging. Follow those instructions.

Dosages

Only use detergents which are suitable for use in a washing machine. You will obtain the best results from your wash with the minimum use of chemical products and the best care for your laundry if you take into consideration the degree of soiling ? as well as the type of detergent to choose.

The amount of detergent to use depends on:

• water hardness ?: depending on the hardness of the water and the type of detergent used, it is possible to reduce the amount of detergent.
• the degree of soiling ?: it is possible to reduce the amount of detergent used depending on the degree of soiling.
• amount of laundry ?: it is possible to reduce the amount of detergent when washing only a small amount of laundry.

Dosage for powder detergent

For normal and low concentration detergents: for normally soiled laundry choose a programme without prewash. Put the detergent in compartment "II" of the drawer.

For heavily soiled laundry, choose a programme with prewash. Put 1/4 of the detergent in compartment "I", 3/4 in compartment "II" of the drawer.

When using water softeners ?, first put in the detergent, then add the softener to compartment "II".

For highly concentrated detergents not in single dose format, follow what is shown on pack exactly as regards type and amount of dosage.

To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids provided in the detergent packaging.

Liquid detergent dosage

Liquid detergents may be used in accordance with the instructions on the relevant packaging, for all programmes without prewash, by using the special container which is placed in the drum or, for those models that have it, in the special insert for liquid detergents.

Useful advice for users

Tips on using your domestic appliance in the most environmentally-friendly and economical way ♻️.

Do a full load in your washing machine ?

To prevent any possible waste of energy ?, water ? or detergent ? we recommend that you put a full load in your washing machine, not exceed the recommended maximum load size. Up to 50% energy saving can be made with one full load compared to two half load washes.

When is prewashing really needed?

Only with particularly dirty loads! Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled laundry.

Which wash temperature should you choose? ?️

Using stain removers ? before machine washing reduces the need to wash at temperatures over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature rather than 90°C.

Main wash

Sorting the laundry

• It is recommended you wash only items which are machine washable ? with water and detergent and not dry-clean items ?.
• If you need to wash rugs, bedspreads or other heavy items ?️, it is best not to spin them ?.
• Sort the laundry according to fabric type, degree of soiling ? and wash temperature ?️: Always follow the wash care advice on the garment label for the most suitable care and treatment of the laundry.

Laundry for hot wash ?

Coloured, easy-care materials ✨

Delicates and wool ??

Wash by hand ✋

Items labelled with the following symbol are not suitable for machine washing: ? (Dry clean).

For very delicate items, such as net curtains, underwear, tights etc., you are advised to use a laundry net or wash bag ?.

Woollen items must be labelled with the "Pure New Wool" symbol ? to be washed in the machine, and must also be labelled "non-matting" ? or "machine washable" ?.

Colour often leaks from new coloured items ?. This can then colour other lighter items being washed. We therefore recommend that coloured items should be washed for the first time separately. For future washes, colourfast items can only be washed with whites ⚪ up to 40°C.

? Note: when sorting laundry

• check there are no metal objects ? (such as paper clips ?, safety pins ?, pins, coins ? etc...);
• button up pillowcases ?️, fasten zips ?️, hook & eye fasteners ?, belts ? and long dressing gown cords ?;
• remove curtain hooks ?;
• pay close attention to the labels on items ?️
• if you notice stubborn stains ?✨ whilst sorting the laundry, remove them using a special detergent ? or a special stain remover ?.

We recommend that you do not do a full load of towelling items ? only as these become too heavy since they absorb a lot of water.

The correct way to wash

Preparing the laundry

1. Select the laundry ?.

Loading the laundry

1. Open the porthole ?.
2. Put the laundry in the washing machine. Close the porthole again, ensuring that no items of laundry are obstructing the lock.

Putting detergent in machine

1. Open the drawer ?, choose the detergent and put in the correct amount, according to the manufacturer's instructions and the advice on page 17. Add any other laundry aids (see page 17). Close the drawer again.

Selecting the wash programme

Refer to the programme guide or the programme descriptions on the machine to select the most suitable programme ⚙️. Turning the selector knob, the required programme is activated. Wait for the "STOP" indicator light to flash. Press additional function buttons (if required). Check that the tap ? is turned on and that the discharge hose is positioned correctly.

Press the "Start/Pause" button ▶️. When the "Start/Pause" button is pressed the machine sets the working sequence in motion. The programme carries out with the programme selector stationary on the selected programme till cycle ends.

Warning: If there is any break in the power supply ⚡ while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left off.

When the programme is finished

At the end of the programme the indicator light “STOP” will go on. Wait for the door lock to be released (about 2 minutes ⏳ after the programme has finished). The "Door Security" indicator light will go out. Switch off the machine by turning the programme selector on the “OFF” position. Open the door ? and remove the laundry. Turn off the tap ?.

Cleaning and routine maintenance

Do not use alcohol-based scourers and / or thinners on the outside of your washing machine, just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance:

• Cleaning the drawer compartments ?.
• Cleaning the filter ?️.
• Cleaning the door glass ?.

Cleaning the drawer compartments

Even if it is not strictly necessary, it is good to clean the compartments for bleaching detergents and additives occasionally.

1. To do this you just need to pull them out firmly, but without forcing them.
2. Clean everything in the compartment under running water ?.
3. Put everything back in its proper place.

Cleaning the filter

The washing machine is fitted with a special filter ?️ for handling large deposits which could block the discharge hose ? (coins ?, buttons etc.) and which can, therefore, be easily retrieved.

We recommend that the filter be cleaned at least once a month.

The cleaning operation is as follows:

1. Ease off the plinth cover as shown in picture.
2. Use the base as a tray to collect left over water in filter.
3. Turn the filter anti-clockwise ↩️ until it stops in the vertical position. Remove and clean.
4. After cleaning, replace the filter. Then follow all procedures described above in reverse order.

Attention: if the filter needs cleaning while there is washing still in the drum, follow the instructions on the following page to empty the water. This will prevent excessive loss of water via the filter.

Cleaning the door glass

Regularly clean the door glass ? with a damp cloth. A build up of soiling and residues from the water may result in water leaking from the door. Do not use abrasive cleaners ? as they can scratch the surface.

Transporting the appliance or long periods when appliance is not in use

If the appliance is being transported ? or is out of use for long periods ⏳ in unheated places ?, all remaining water must be completely removed from the hoses ?. Ensure mains power ? is off, then unclip the hose and point it downwards into a basin ? until all the water has emptied out. When finished, repeat the operation in the reverse order.

Investigating malfunctions

What might be the cause of... Defects you can remedy yourself

The machine makes a different noise when spinning! This is because it has a brush motor ⚡ for better performance ⭐.

Only a small level of water ? can be seen in the drum! This is because new machines do not use much water, yet achieve the same standard of washing and rinsing.

Note: The use of environmentally-friendly, phosphate-free detergents can have the following effects:

• waste water from rinsing may be cloudier because of the presence of zeolites ✨ held in suspension, without the rinse performance being adversely affected;
• presence of white powder (zeolites) ✨ on laundry after washing, which is not absorbed by the fabric and does not alter the colour of the fabric.
• The presence of foam ? in the final rinsing water is not necessarily an indication of poor rinsing.
• Anionic surfactants ? used in washing detergent formulae often prove to be difficult to remove from the laundry itself and, even in small quantities, can still cause considerable foam production ?.
• Carrying out more rinse cycles ? does not serve any purpose in such cases.

Technical data

• Max. load of dry laundry ?: 5 kg
• Water pressure ?: 0,05 ÷ 0,8 MPa

Measurements ?

• Width ↔️: 60 cm
• Depth ↕️: 52 cm
• Height ⬆️: 85 cm

NB: For specifications regarding electrical data ⚡, see the data panel on the front of the washing machine (porthole area) - as shown in diagram above.

EC Appliance complies with European Directive 89/336/EEC, 73/23/EEC and subsequent amendments. ✅

SETTING UP + INSTALLATION

Remove the polystyrene base ? and place the machine near its permanent position ? (diagram 1).

Carefully cut through the hose retaining clip ? at the rear of the appliance (diagram 2).

Unscrew the central bolt (A) ?; unscrew the 4 lateral screws (B) ? and remove the cross piece (C) ➕ (diagram 3).

Lean the machine forward and remove the plastic bags ?️ containing the two polystyrene blocks ? at the sides, pulling downwards ⬇️ (diagram 4).

Press the plug ? (to be found in the envelope with the instructions) into the hole ?️ and rotate ? to lock into position ? (diagram 5).

WARNING: DO NOT LEAVE THE PACKAGING ? WITHIN REACH OF CHILDREN ? AS IT IS A POTENTIAL SOURCE OF DANGER ⚠️.

Apply the insulation sheet ?️ of corrugated material ? to the base as shown.

Level the machine by means of the front feet ?.

1. Turn the nut clockwise ? to release the screw adjuster ? on the foot.
2. Rotate the foot ⬆️⬇️ to raise or lower it until it stands firmly ? on the ground ?.
3. Lock the foot ? in position by turning the nut anti-clockwise ↩️ until it comes up against the bottom of the machine ⬇️.

Installation Notes

? Note: we recommend you keep the transit bracket ⚙️, braces ? and screws ? to immobilise ? the machine for future transit ?. The Manufacturers ? will not be responsible for any possible damage ? to the machine caused by not following the rules relating to releasing the mechanism ⚙️. The user ? is responsible for all costs ? of installation.

Water connection

The appliance must be connected to the water mains ? using new hose-sets ?. The old hose-sets should not be re-used.

The machine has an inlet hose with 3/4" B.S.P threaded end connection ? to attach between the threaded connector ? on the appliance and the cold water supply ?.

? Note: it is advisable ? to turn off the tap ? after each wash to isolate ? the washing machine from the water supply ?.

For the washing machine to function properly ✅ the terminal end ? of the discharge hose ? (mouth ?) must be at a minimum ? of 50 cm and a maximum ? of 85 cm from the ground.

Electricity supply and safety advice ⚡⚠️

Washing machines are supplied to operate at a voltage of 230V, 50 Hz single-phase ⚡. Check that the conductor ⚡ is powerful enough ? to supply at least 3.0 kW, then connect the plug ? to a 16A earthed socket ?.

After installation, the appliance must be positioned ? so that the plug ? is accessible ?.

Check that the electricity supply to your home has an earthing system ⚡.

The socket ? in your home and the plug ? on the appliance must be of the same type ?.

It is generally not advisable ❌ to use multiple adapters ?? and/or extension leads ???.

All Candy washing machines comply ✅ with the safety requirements ?️ laid down by the Quality Trademark Institute ?.

NOTES

...

WEEE Directive Information ♻️

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) ♻️. By ensuring this product is disposed of correctly ✅, you will help prevent potential negative consequences ? for the environment ? and human health ❤️, which could otherwise be caused by inappropriate waste handling ?️ of this product.

The symbol ?️ on the product indicates that this product may not be treated as household waste ??️. Instead it shall be handed over to the applicable collection point ? for the recycling ♻️ of electrical and electronic equipment ⚡?.

Disposal must be carried out in accordance with local environmental regulations ⚖️ for waste disposal ?️.

For more detailed information ℹ️ about treatment, recovery and recycling ♻️ of this product, please contact your local city office ?️, your household waste disposal service ?️ or the shop ? where you purchased the product.

EN

05.04 - 41016058 - Printed in Italy - Imprimé en Italie